Search
2000 articles for “Development” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Fabrication, Microstructure and Mechanical Behavior of Aluminum Alloy (LM-13) Reinforced with Nano-ZrO2 Particulate Chilled Nano-Metal Matrix Composites (CNMMCs)
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with ZrO2 particulates in the weight percent ranging from 3 wt.% to 12 wt.% in the steps of 3 wt.%. The reinforcement i.e., ZrO2 particle size added varies between 100–200 nm. The resulting CNMMCs are solidified under the influence of copper chill of 25 mm thickness to study the effect …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 2, 2020 · pp. 17–30 Read article
-
Design and Implementation of Liquid Crystal Devices and Study its Nano Applications
Abstract: Photoalignment has clear benefits in correlation with the ordinarily "scouring" treatment of the substrates of fluid precious stone presentation (LCD) cells. The fluid gem photoalignment is nano- innovation, as the thickness of the arrangement layer is around 2–15 nm. The use of the photograph arrangement and photograph designing nano innovation for the new age of photonic and show gadgets will be inspected. We discussed about LC polarization regulators, rotators, and …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 1, 2022 · pp. 31–39 Read article
-
Computation of Gas Turbine System as Renewable Energy Conversion Mechanisms
Abstract: In the present work thermo-economic analysis of a cogeneration cycle is carried out so that any power generation industry can choose best power generation system out of the choices available with organisation. Mathematical modeling for the cost evaluation of each component is developed and results are obtained with computational programming tool EES (Engineering Equation Solver). Form results it is being found that with change in combustion chamber outlet temperature or …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 10–15 Read article
-
Applications of Composite Materials in Aerospace Industry
Abstract: Composites are becoming increasingly important in the aerospace industry. At least 30–40 per cent of modern airframes are now made of composites, and this percentage is increasing rapidly due to technological advances in the field. Fibre-reinforced polymer composite materials are fast gaining ground as preferred materials for construction of aircrafts and space crafts. This paper gives a review of some of these developments with a discussion of the problems with …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 5–10 Read article
-
Corrosion Inhibitors for Steel Appliances
Abstract: Inhibitors of corrosion in stainless steels are based on alloy developments. Effects of various alloy elements are to form passive film on surfaces under corrosive conditions. Tendency of passive film formation has rendered stainless steel to be applicable for any sector except bio-medical purposes. Line pipe of flow lines and gathering lines are suggested to use conventional carbon steel pipe with cost effective inhibitors. Duel phase stainless steels or improved …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Tribological Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites for Automobile Applications.
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with titanium carbide (TiC) particulates in the weight percent ranging from 3 wt.% to 15 wt.% in the steps of 3 wt.%. The dispersoid i.e. TiC particle size added varies between 100–200 µm. The resulting MMCs were solidified under the influence of copper chill of 25 mm thickness to study …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 24–46 Read article
-
Advanced Techniques for Delamination Toughening in Carbon Fibre Reinforced Composites
Abstract: Carbon fibre reinforced composites are widely used in various industries due to their excellent strengthto-weight ratio and stiffness properties. However, one of the major issues in these composites is delamination, which occurs due to the weak interlaminar bonding between the layers of fibers and matrix. Delamination leads to a reduction in the load-carrying capacity and structural integrity of the composite. To address this issue, several advanced techniques for delamination toughening …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 49–55 Read article
-
Green Hydrogen based Green Nanotechnology for Industrial Nano waste Treatment
Abstract: The research into nanowaste treatment and recycling is ongoing process. Particularly the development of new methods and technology for nanowaste treatment is a focus of most professionals, scientist and engineers. One of the developments among the emerging technology is the green nanotechnology, which is environmental friend, affordable, an alternative means of clean energy productions, and economically cost effective. This research is therefore, focused on assessment of chemical related waste and …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 41–48 Read article
-
Free Vibration Analysis of Laminated Composite Plate with Various Boundary Condition Using FEM
Abstract: The vibration analysis of laminated composite plates is analyzed using finite element method. A suitable finite element model is proposed and developed based on first order shear deformation theory using ANSYS parametric design language (APDL) code. The model has been developed using an appropriate eight node isoparametric element (SHELL281) from the ANSYS element library. In this paper Numerical results have been computed for the effect of material properties, thickness ratio …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
An Evaluation of Cracks Repairing Techniques in Metals
Abstract: Cracks are surface that develop in a material. Dissemination energy derived from mechanical, thermal, chemical, and metallurgical effects, or a grouping of these may affect crack beginning and growth. Numerous types of cracks exist in metals and can be characterized as grinding, solidification, cooling, crater, machining tears, plating, centerline, pickling, heat treatment, fatigue, creep, stress corrosion and hydrogen cracks. Cracks can grow and lead to complete fracture of the component …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 9–15 Read article
-
Failure Prediction of Composite Lamina
Abstract: Composite materials are preferable in many applications of engineering than their metallic equivalent. These materials provide desirable characteristics and required properties for specific design and testing. In orthotropic fiber composites, the fiber orientation dictates the material properties, because the properties can be built into the laminate during fabrication. In this study, a composite laminate is tested with a specific configuration whether it would fail or survive under specific load. If …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 27–36 Read article
-
Analyzing the Effect of Rice Husk Ash & Quartz Powder on Mechanical Properties of Polypropylene Fiber Based Concrete Using Regression Analysis
Abstract: Several works were identified with sustainable development have uplifted the improvement of composite binders incorporating Portland cement, industrial, agricultural by- products and partial substitutions to aggregates. One of the most adverse effects of using cement is the emission of CO2 into atmosphere during production and it can be reduced with the effective use of cementitious materials. Several efforts were attempted to make use of supplementary cementitious materials to enhance the …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 51–57 Read article
-
A Model for Plastic-Hydrolytic Damage Bioresorbable Polymer Composites
Abstract: This paper explains and assesses a recently developed constitutive model for elastic-damage that may sustain plastic-hydrolytic damage. When a metallic material is subjected to plastic strain, voids and microcracks in the metal matrix start to form, develop, and merge. This is what causes ductilitydegradation in metals. Only a few of the many models that have been presented to depict ductile failure have done a thorough analysis of the entire damage …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 23–27 Read article
-
Environment Friendly, Exterior Grade Resin Adhesive from Phenol-Animal Glue Formaldehyde (PGF)
Abstract: Phenoplast and aminoplast based resins are the important adhesive for the manufacturing of marine grade, shuttering and moisture resistance plywood. Environmental concerns and higher cost of petroleum based resins have resulted in the development of technologies to replace phenol partially by biomaterials for the manufacturing of resin adhesive. Natural bio-based materials such as tannin, CNSL (cardanol), lignin soya etc. are used as partial substitution of phenol. This paper presents the …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 16–22 Read article
-
Green Adhesive—Using Glyoxalated Lignin and Hydrogenated Resin as Ecologically Safe Wood Adhesive for Interior Plywood
Abstract: Petroleum-based adhesive such as urea formaldehyde and phenol formaldehyde resin dominates adhesive market which releases formaldehyde and VOC to the environment. The purpose of this study is to develop an adhesive based on isocyanate in combination with compounds from renewable sources like lignin, protein and starch. Adhesive formulation was developed by incorporation of hydrogenated resin, corn starch/PVOH emulsion with glyoxalated lignin (GL) and evaluation properties of the adhesive with plywood …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 23–27 Read article
-
SEPARATION OF CO2/CH4 USING POLYMERIC MEMBRANES - REVIEW
Abstract: Separation of CO /CH mixture is widely done efficient separation of mixture into desired components unit processes and unit operation had 2 4 been developed with passage of time. Sometimes using conventional technologies. CO2 when carried along with CH4 can cause additional cost of pumping. Most commonly used technique like cryogenic separation, adsorption and absorption are used for decades for separation of CO2 form CH4.Membrane has been developing technology for …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 1, 2019 · pp. 13–29 Read article
-
A Model to Study the Effect of Homogeneous Nucleation and Emulsifier Amounts on Methyl Methacrylate Emulsion Polymerization in a Seeded Semi-batch Reactor
Abstract: ABSTRACTAn extensive model is developed for methyl methacrylate emulsion polymerization. The assumption of monodispersed particle size distribution is used in developing the model. It is found that inclusion of homogeneous nucleation in the model leads to under prediction of variation of conversion with time. The effects of three different emulsifier amounts on the variation of conversion with time at 50°C isothermal reactor operation, keeping all the other ingredients constant are …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 2, 2019 · pp. 9–17 Read article
-
Evaluation of Response Characteristics of Distillation Column
Abstract: In this paper mathematical model was developed to monitor, predict and control the effectiveness of the controller designed with the principle of various responses. The result obtain in the investigation demonstrate the usefulness of input, ramp, and impulse response in monitoring, predicting and controlling the separation of the distillate product from the reflux for effective performance evaluation of the distillation column. The model evaluated the impact of feed tray, reboiler …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 32–43 Read article
-
Charge Infusion in Organic Device: With and Without SWCNTs
Abstract: In nanotechnology field, invention of single walled carbon nanotubes (SWCNTs) is a noteworthy development. It creates the door for advanced development in scientific field. Due to their appealing mechanical, electrical, and thermal properties, SWCNTs have multivarious usages. In this work, we have examined and predicted how SWCNT will affect the device performance in which Thionine dye is intercalated between Indium Tin Oxide (ITO) coated glass and aluminium (Al) to form …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 1, 2023 · pp. 26–31 Read article
-
Predictive Model on Constant Pressure Drop Variable: Area Fluid Flow System in a Pipe
Abstract: The effect of density, pressure drop, and orifice area was examined in this research. The basic equation developed to represent steady-state fluid flow is the Bernoulli equation which assumes that the total mechanical energy is conserved for steady incompressible, in viscid, isotherm flow with no heat transfer or work done. These restrictive conditions can actually be representative of many physical systems. The Bernoulli’s principle was applied in explaining the design …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 1, 2018 · pp. 23–34 Read article