Search
61 articles for “x-ray microscope”
-
Three Dimensional (3D) Structure and Morphology ofCarbon Fibers from X-Ray Microscopy (XRM) Analysis†
Abstract: X-ray microscopy is an elegant chemical imaging technique that bridges the gap between lightmicroscopy and electron microscopy. Vital information on the chemical state (valency, surfacefunctionality), chemical composition, three-dimensional (3D) chemical structure (order, disorder,rupture), and chemical imaging can be obtained from X-ray microscopy. In the current originalresearch article, X-ray microscopy is used as a characterization tool to examine the microstructuralfeatures of commercial carbon fibers. Pitch-based (NX100) and polyacrylonitrile (PAN)-based(T700SC) CFs chosen …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 2, 2024 · pp. 23–32 Read article
-
A Critical Review on Electron, X-Ray, Probe Microscopic Techniques for Analysis of Biomaterials and Nanomaterials
Abstract: Herein this article an attempt has been made to study advanced microscopic techniques in detail. In this review paper various types of microscopes which are classified as electron microscopes, x-ray microscope and probe microscopes have been discussed. Also, the various subtypes of each of these microscopes have been presented in this paper. This paper focuses on the historical developments, principles of operation, instrumentation, advantages and limitations of the various types …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 10, Issue 2, 2024 · pp. 1–32 Read article
-
Amorphous Carbon Nanotube-MoS2 Nanohybrids : A New Future Material in the Application of Battery, Supercapacitor and Field-emission Display Devices
Abstract: The discovery of graphene make the researcher interested towards the other two-dimensional material which has quite similar properties like graphene. Among them, MoS2 nanosheets has extraordinary optoelectronic and physical properties. It has several applications in developing battery, sensor, optoelectronic device etc. On the other hand, amorphous carbon nanotube can be synthesized by using a low temperature chemical process. Due to the easy processing of amorphous carbon nanotube (ACNT), good optoelectronic …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 36–45 Read article
-
Two-dimensional MoS2 Nanosheets: Preparation and Characterization
Abstract: The amazing properties and useful applications of graphene in the field of sensors, electronics and material science opens a new challenges to other two dimensional semiconductor materials. Specially due to extraordinary electronic, mechanical and optical properties, molybdenum disulfide (MoS2) is attracting huge interest in several applications. Single layer MoS2 with direct band gap shows better semiconductor behavior such as photoluminescence, makes them more acceptable in optoelectronic applications in comparison with …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 2, 2019 · pp. 17–25 Read article
-
Modern Material Concept to Produce Low-Loss Non- Oriented Electric Alloys
Abstract: The production of energy-efficient materials is an essential aspect of modern society, with efforts focused on reducing energy loss and conserving resources. A key element in the creation of energy-efficient electrical equipment, such as transformers, generators, and motors, is low-loss non-oriented electrical steel. In this regard, material design is a promising approach to improve the properties of non-oriented electrical steel. This paper presents an overview of material design for low-loss …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 37–42 Read article
-
Green Synthesis of Zinc Oxide (ZnO) Nanoparticles using Urtica dioica Plant Leaf Extract
Abstract: The green synthesis of nanoparticles by biological systems, particularly plant extracts, has become an emerging area of nanotechnologies. Nano materials have wide range application in various fields such as electronics, optics, material science and bio medical science due to their size and morphology. Zinc oxide is a versatile semiconductors material and has attractive properties like wideband gap (3.2eV) large exciton biding energy, high stability and environmental friendly material. The synthesis …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 44–57 Read article
-
Green Synthesis of Silver Nanoparticles using Aqueous Leaf Extract of Artabotrys odoratissimus R.Br.
Abstract: In the present study silver nanoparticles were synthesized using the aqueous leaf extract of Artabotrys odoratissimus R.Br. as the reducing agent. The formation of silver nanoparticles was confirmed by colour change from light yellow to dark brownish red, UV-Visible Spectroscopy, FTIR, X-Ray Diffraction Method (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray microanalysis spectroscopy (EDS). The nanoparticles showed an absorbance at 475.5nm on UV-Visible spectroscopy. Fourier Transform Infra-Red (FTIR) …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 1, 2018 · pp. 5–11 Read article
-
Advances in the Synthesis and Functional Applications of Crystalline Materials
Abstract: Crystalline materials represent one of the most important classes of advanced materials in modern science and engineering due to their highly ordered atomic arrangements and outstanding physical, chemical, electrical, optical, thermal, and mechanical properties. The periodic organization of atoms within crystal lattices provides exceptional opportunities for controlling and optimizing material performance through advanced synthesis strategies, crystal growth techniques, compositional modification, and defect engineering. Recent progress in materials science has enabled …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 12, Issue 2, 2026 Read article
-
Deposition and Characterization of ZnO Thin Films by Thermal Vacuum Thermal Evaporation Method for Photoconductive Sensor Application
Abstract: In this work we have deposited ZnO thin films using thermal evaporation method. The films have been deposited on silicon substrate for structural characterization and on glass substrate for optical characterization. The structural, surface morphology, optical properties and electrical properties of ZnO thin films were investigated systematically using X-ray diffractometer (XRD), scanning electron microscope (SEM), atomic force microscopy (AFM), ellipsometeric measurement and semiconductor parameter analyzer respectively. The deposited ZnO thin …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
Synthesis of Fe2(MoO4)3/MoO3 Nanocatalysts by Solution Combustion Approach and Their Catalytic Performance for the Selective Oxidation of Methanol
Abstract: The Fe 2 (MoO 4 ) 3 /MoO 3 nanocatalysts comprising Fe 2 (MoO 4 ) 3 nanoparticles supported on MoO 3 nanorods were synthesized via two-step solution combustion approach and their catalytic performance for the selective oxidation of methanol were evaluated. The materials have been characterised using electron microscopy, powder X-ray diffraction and Raman spectroscopy. First, MoO 3 nanoparticles were prepared by solution combustion reaction employing ammonium nitrate as …
Published in International Journal of Applied Nanotechnology · Vol. 10, Issue 1, 2024 · pp. 37–47 Read article
-
Synthesis and Characterization of Magnetite-Pectin-Alginate Hybrid and Bionanocomposite
Abstract: It is a one pot synthesis of hybrid bionanocomposite comprising of inorganic magnetite with stabilizer biopolymer pectin and alginate in co-precipitation method using sodium hydroxide and ammonium hydroxide as precipitating agents. A lot of comparison and investigation has been done in particle size of nanocomposite by changing the stoichiometric ratio of both magnetite and biopolymer concentration and drying condition of composite. The nanocomposite has been characterized using infrared spectroscopy (FTIR), …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 1, 2017 · pp. 18–22 Read article
-
Zinc oxide/Chitosan biocompatible nanocomposites: Preparation, Characterization and its use in Congo red dye photodegradation
Abstract: Zinc oxide/chitosan biocompatible nanocomposites have been successfully synthesized by co-precipitation method. The samples were characterized by X-ray diffraction (XRD), Scanning electron microscope (SEM), Energy dispersive X ray Flurescence spectroscopy (EDAX) and Fourier transformation infrared spectroscopy (FTIR). The photocatalytic efficiency and photostability of the sample was investigated systematically for Congo red degradation under solar light irradiation. UV-vis Spectroscopy was employed to investigate the optical properties and photocatalysis behavior of the Zinc …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 2, 2017 · pp. 27–39 Read article
-
Kinetic Modeling and Thermodynamic Study of the Simultaneous Adsorption of Polycyclic Aromatic Hydrocarbons (PAHs) Onto Organomontmorillonite in Aqueous Medium
Abstract: Water is a vital source of human life, but it has frequently been polluted by mono and polycyclic aromatic hydrocarbons, usually from petrochemicals in petroleum industrial effluents as well as other anthropogenic activities. This study investigate the potential of montmorillonite intercalated HDTMAand TMPA cations for effective removal of five (5) different polycyclic aromatic hydrocarbons (PAH) namely: naphthalene, anthracene, chrysene,benzo(a)pyrene and benzo(g,h,i) perylene in aqueous medium. To research PAH adsorption behaviour …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 28–38 Read article
-
Preparation of PMMA Nanoparticles in Different Ways and Studying the Effect of Some Factors on Changing Its Properties
Abstract: Poly(methyl methacrylate) (PMMA) is usually made with the help of radical polymerization, coordination polymerization, and methyl methacrylate acid esterification. Due to its hardness, PMMA is widely used in the medical sciences, optical materials, electronics, and automotive industries. The present study aims to fabricate PMMA nanoparticles using different chemical methods such as sol-gel polymerization, co polymerization, etc. Various aspects of the synthesis process will be changed, such as temperature, reaction time, …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 37–43 Read article
-
Development of an Automated Load-Controlled Thermopower Measurement Technique for Thermoelectric Materials
Abstract: The Seebeck coefficient, or thermoelectric power, is crucial. In order to deliver accurate readings over a wide temperature range, a load-based, high-precision thermoelectric power (TEP) measurement device has been designed, constructed, and experimentally validated in this study. The system is based on a differential DC approach and replaces conventional spring-based contact mechanisms with a shifting mechanical load to avoid errors caused by spring contraction, thermal cycling, and contact instability at …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 1, 2026 · pp. 7–18 Read article
-
Green approach for the synthesis of Titanium dioxide nano particles and their characterization
Abstract: The ecofriendly and sustainable method of green synthesis of nanoparticles gained a lot of popularity these days. Azadirachta indica (neem) leaves are used in this study to identify the eco friendly synthesis of titanium dioxide nanoparticles (TiO 2 NPs). TiO 2 NPs can be easily and sustainably synthesized from titanium precursors using neem leaves having bioactive compounds. Green production of TiO 2 NPs is facilitated by the stabilizing and capping …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 11, Issue 1, 2026 · pp. 50–58 Read article
-
Analytical Profiling of Processed Printer Inks on Papers for Inorganic Trace Elements by Energy Dispersive X-Ray Microanalysis
Abstract: For the forensic examination of printed documents, an attempt has been made to determine the elemental composition of inks of ink jet printer taken from sample documents using nondestructive technique of Scanning Electron Microscope-Energy Dispersive X-Ray Spectrometry and in order to generate the analytical profiling of printed inks for inorganic trace elements leading to the differentiation of printers. All the four primary inks used in printers are the matrix of …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 1, 2020 · pp. 5–13 Read article
-
Seaweed Mediated Biosynthesis of Silver Nanoparticles Using Gracilaria fergusonii J.Ag. Collected From Hare Island, Thoothukudi in the South East Coast of Tamil Nadu, India
Abstract: In the present study silver nanoparticles were synthesized using the aqueous extract of red seaweed Gracilaria fergusonii J.Ag. as the reducing agent. The formation of silver nanoparticles was confirmed by colour change from light yellow to dark brownish red, UV– visible spectroscopy, FT-IR, X-ray diffraction method (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray microanalysis spectroscopy (EDS). The anoparticles showed an absorbance at 442 nm on UV–visible spectroscopy. The …
Published in International Journal of Plant Biotechnology · Vol. 1, Issue 1-2, 2015 · pp. 50–57 Read article
-
Biosynthesis of silver nanoparticles using aqueous leaf extract of Muntingia calabura Linn.
Abstract: The present study was focused to synthesis silver nanoparticles using the aqueous leaf extract of Muntingia calabura L. as the reducing agent. The formation of silver nanoparticles was confirmed by colour change from light yellow to dark brownish red, UV-Visible Spectroscopy, FT-IR, X-Ray Diffraction Method (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray microanalysis spectroscopy (EDS). The nanoparticles showed an absorbance at 443nm on UV-Visible spectroscopy. The presence of …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 1, 2018 · pp. 9–15 Read article
-
Magneto-electrodeposition of Sn–Ni alloy Coating for Better Corrosion Protection
Abstract: The present paper reports the development of excellent corrosion resistant Sn–Ni alloy coatings from a new pyrophosphate bath by magneto-electrodeposition (MED) approach. First part reports optimization of conditions for deposition of Sn–Ni coatings on mild steel by conventional electrodeposition (ED) method and their characterization. The second part demonstrates how the corrosion resistance of Sn–Ni alloy coatings can be improved drastically by MED method, using same bath. Significant decrease of corrosion …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 1, 2016 · pp. 29–42 Read article