Search
83 articles for “microstructure”
-
Mechanical and Microstructure Properties of Al and SiC Reinforced Aluminum-Based Metal Matrix Composite
Abstract: It is becoming increasingly difficult to design new technical materials that are resistant to wear damage and corrosion degradation in severe service circumstances. Unfortunately, even with crucial passive metals, like Al alloys, there is often a compromise between wear and corrosion resistance. Because of the unfavorable galvanic connection between the precipitates and the matrix, precipitates not only harden the material but also accelerate corrosion. This research established that a supersaturated …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 26–43 Read article
-
Fabrication, Microstructure and Mechanical Behavior of Aluminum Alloy (LM-13) Reinforced with Nano-ZrO2 Particulate Chilled Nano-Metal Matrix Composites (CNMMCs)
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with ZrO2 particulates in the weight percent ranging from 3 wt.% to 12 wt.% in the steps of 3 wt.%. The reinforcement i.e., ZrO2 particle size added varies between 100–200 nm. The resulting CNMMCs are solidified under the influence of copper chill of 25 mm thickness to study the effect …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 2, 2020 · pp. 17–30 Read article
-
Microstructural and Hardness Study of A390/20wt.% SiC Functionally Graded Metal Matrix Composite
Abstract: Functionally graded materials are the upcoming new class of advanced materials, which exhibit gradual change in the microstructure and the composition in a definite direction, and hence variation in functional performance within a part. Functionally graded metal matrix composites (FGMMC) are FGM with metal and ceramic constituents. Aluminum-Silicon alloys are well-known for their unique combination of desirable characteristics, which includes excellent castability and less density combined with good mechanical properties. …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 2, 2020 · pp. 52–58 Read article
-
Tri-Route Orchestration of Sr-Modification, MoldVibration, and T6 Treatment on the Microstructure andPerformance of A356 Alloy
Abstract: This study examines the cascade effects of chemical modification, mechanical mold vibration during solidification, and subsequent T6 heat treatment on the microstructural evolution and multi-property enhancement of A356 Alloy cast via permanent mold casting. Initially Sodium (Na) modifying flux (2– 4 wt%) and Strontium (Sr) elemental modifier (0.01–0.05 wt%) were implemented to refine the morphology of eutectic silicon; Sr addition at an optimal concentration of 0.04 wt.% yielded superior eutectic …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 2, 2026 · pp. 13–25 Read article
-
Microstructure Dependence of Electrical Properties in AgI- and Ag2S-Doped Glass Nanocomposites
Abstract: In this paper, we report the study of microstructure dependence of ion conduction for several AgI- and Ag2S-doped glasses and glass nanocomposites systems. The structure and electrical properties of these samples have been studied and the effects of formation of nanocrystalline phases on the electrical properties of these glasses are presented. The microstructure of these glasses was studied employing transmission electron microscope (TEM). The temperature dependence of dc conductivity shows …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 9–13 Read article
-
Synthesis of Bromobutyl Rubber: Effect of Reaction Temperature and Time on Bromobutyl Rubber Microstructure
Abstract: Butyl rubber is prepared by cationic polymerization process either by solution or slurry phase by randomly copolymerizing isobutylene with small amount of isoprene (1-3 mol %). It has good air impermeability and oxidative stability and thus finds extensive use in inner tube applications. The presence of unsaturation in the form of isoprene units in butyl rubber provides a means of enhancing useful properties of this important commodity elastomer by incorporation …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 30–39 Read article
-
Analysis of Effect Due to Various Heat Treatment Processes on Morphological and Microstructural Properties of Grey Cast Iron
Abstract: Abstract Grey cast iron, a member of the cast iron family, is defined by the presence of flake graphite in its composition. It displays distinct qualities encompassing strength, hardness, modulus of elasticity, shock absorption, wear resistance, and thermal conductivity. Particularly noteworthy is its exceptional performance in casting, cutting abilities, and its cost-effective casting process. Its primary utilization occurs predominantly within industries, where its durability and adaptable attributes find purpose. The …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 2, 2025 · pp. 16–31 Read article
-
Cognitive Metallurgy: A Study on Microstructure and Energy Efficiency in High-Temperature Alloying via Sensor Fusion and Deep Reinforcement Learning
Abstract: Background Traditional high-temperature metallurgical processes, such as continuous casting and specialty alloy synthesis, are characterized by high energy consumption, stochastic variability, and reliance on post-process defect inspection. The inability to precisely monitor, model, and predict the real-time thermal, chemical, and mechanical state of molten metal and cooling substrates results in significant material waste and inconsistent microstructural integrity. Methodology This study introduces a novel framework for Cognitive Metallurgy utilizing an integrated …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 27–36 Read article
-
Revolutionizing Glass Science: Analyzing the Crystallization Dynamics of Economical Glass-Ceramic Compositions
Abstract: The development of glass-ceramics presents an innovative approach to material science, leveraging the unique properties of non-crystalline glass combined with controlled crystallization. This study investigates the crystallization dynamics of economical glass-ceramic compositions derived from raw materials, such as blast furnace slag and granite rock. We explore the fabrication processes, examining the influence of these raw materials on microstructural interlocking and phase composition. Our findings reveal that specific ratios of slag …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 10, Issue 2, 2025 · pp. 9–15 Read article
-
Microstructure and Mechanical Behavior of Microalloyed Forging Steels
Abstract: The microalloyed (MA) forging steels have been developed over the past several decades and they are gradually employed in the high-performance applications in many structural, automotive, and numerous engineering applications. The principle of microalloying contents in the Fe–C alloy system, thereby preferably combined with different mechanical, heat treatment, and microalloying solubility control the precipitation behaviors that lead to enormous opportunities to develop a new generation of high strength low alloy …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 1–14 Read article
-
Study of Microstructure and corrosion effects of precipitation hardened high strength AA-7xxx aluminium alloy subjected to cryo rolling
Abstract: The strength and life of an alloy is the primary parameter taken into consideration while building hulls and superstructures for marine applications. Usually AA-7xxx is widely used for these applications and hence is chosen for the present investigation. Cast AA-7xxx alloy reveals distribution of soluble intermetallic compounds in the α-aluminium matrix. In order to improve the mechanical properties and condition the microstructural features, precipitation hardening (solutionizing and ageing) treatment was …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 18–23 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
Microstructural and Mechanical Behavior of Al6082/SiC/Gr Hybrid Composites
Abstract: The aim involved in designing metal matrix composite materials is to combine the desirable attributes of metals and ceramics. The present work is focused on the study of behavior of aluminum alloy (Al6082) with SiC and graphite (Gr) composites produced by the stir-casting technique. The reinforcement percentage is varied from 5% to 15% in a step of three. Microstructure test, tensile test, and hardness tests are performed on the samples …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 28–40 Read article
-
Tailoring Electrolytic Deposition of Zn-Ni Alloys for Superior Corrosion Resistance in Harsh Environments
Abstract: Since Zn–Ni alloy coatings are more resistant to corrosion than pure zinc coatings, they are being researched extensively. In this study, Zn–Ni alloy coatings electrolytically deposited from an acidic sulfate bath are investigated. The study looks into how the microstructure, phase composition, and corrosion resistance of the coatings are affected by deposition factors like pH, current density, and electrolyte composition. X-ray diffraction (XRD), potentiodynamic polarization, and scanning electron microscopy (SEM) …
Published in International Journal of Chemical Engineering and Processing · Vol. 11, Issue 1, 2025 Read article
-
Advancements and Innovations in Superalloy CoatingTechniques: A Comprehensive Review of ECAP andHigh-Temperature Aluminization
Abstract: Equal Channel Angular Pressing (ECAP) is a pivotal technique within Severe Plastic Deformation (SPD), widely recognized for its exceptional capability to refine grain structures in metals and alloys down to the micro- and nanometer scales. This review offers an in-depth examination of the ECAP process, highlighting its effectiveness in generating ultra-fine grain microstructures that significantly enhance the mechanical properties of materials, such as strength, hardness, and ductility. We provide a …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 2, 2024 · pp. 16–20 Read article
-
Tribological Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites for Automobile Applications.
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with titanium carbide (TiC) particulates in the weight percent ranging from 3 wt.% to 15 wt.% in the steps of 3 wt.%. The dispersoid i.e. TiC particle size added varies between 100–200 µm. The resulting MMCs were solidified under the influence of copper chill of 25 mm thickness to study …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 24–46 Read article
-
A look at friction stir processing for making better surface properties
Abstract: Abstract Friction stir processing is a surface properties modification method consequential from friction stir welding. The process uses a non-consumable tool made up of tool steel material. The tool pin and shoulder plunged in the surface of the base material plates and it mover along the predetermined path. The frictional heat stimulates the plastic deformation during the process & enhances the dynamic recrystallization. The process represents an advanced approach that …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 41–47 Read article
-
Three Dimensional (3D) Structure and Morphology ofCarbon Fibers from X-Ray Microscopy (XRM) Analysis†
Abstract: X-ray microscopy is an elegant chemical imaging technique that bridges the gap between lightmicroscopy and electron microscopy. Vital information on the chemical state (valency, surfacefunctionality), chemical composition, three-dimensional (3D) chemical structure (order, disorder,rupture), and chemical imaging can be obtained from X-ray microscopy. In the current originalresearch article, X-ray microscopy is used as a characterization tool to examine the microstructuralfeatures of commercial carbon fibers. Pitch-based (NX100) and polyacrylonitrile (PAN)-based(T700SC) CFs chosen …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 2, 2024 · pp. 23–32 Read article
-
A Review on Resistance Spot Welding of Dissimilar Metal
Abstract: An extensive analysis of resistance spot welding in dissimilar metals is presented in this review paper. Resistance spot welding (RSW) is a joining technique that is frequently used in various sectors and most importantly in automotive sectors because of its effectiveness and efficiency in creating strong welded joints. This paper provides basic understanding of the various aspects of work done on dissimilar metals. It also gives an understanding of the …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 12–24 Read article
-
A Review of Recent Developments in Solid State-Based Metal Additive Manufacturing: Friction Stir Additive Technique
Abstract: In the age of machines, the whole industry needs light-weight and high strength for lighter devices, machines, etc. The core aerospace industry needs lighter materials for satellites and rockets. Friction Stir Additive Technology (FSAT)represents an innovative approach aimed at leveraging the principles of layered build (AM) layer by layer using solid state (FSW) friction stir welding technology. These represent a particular class of friction-based additive technology (FAT) and can easily …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 2, 2022 · pp. 17–25 Read article