Search
2000 articles for “CO” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Comparative Study on Production and Characterization of Bioethanol from Agricultural Waste Materials
Abstract: Production and characterization of bioethanol from lignocellulosic substrates that include sugarcane bagasse, corn cob and cassava peels were investigated in this research study. The raw materials (sugarcane bagasse, corn cob and cassava peels) were sorted, washed, cleansed to remove dirts and dried to remove moisture contents, and crushed into ground form to increase substrate’s surface area of contacts and sieved through a mesh size of 2 mm. The bioethanol distillates …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 1–9 Read article
-
Characterization and Kinetic Study of Sugarcane Bagasse for the Production of Bio-oil Over Monodispersed Fe2 O3 and ZSM-5 Composite
Abstract: The shortage and price scramble of fossil fuels accompanied by vast CO2 emissions have triggered a worldwide search for alternative and sustainable resources. Wind, solar, geothermal, biomass, and water are the most commonly used alternative energy sources. The biomass residues are typically at low cost and readily availabile, and has been used as feedstocks for synthesis of renewable energy. To produced the bio-fuels from biomass residues, several reaction pathways categorized …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 9, Issue 2, 2023 · pp. 1–13 Read article
-
Kinetics and Mechanisms of the Reduction of Some Carbonyl Compounds with Sodium Dithionite in Aqueous Alkaline Medium
Abstract: Kinetics of the reduction of some carbonyl compounds (acetophenone, benzophenone, benzaldehyde, and salicylaldehyde) with sodium dithionite was studied at 28± 0.5oC and basic concentration in the range of 0.01 to 0.05 mol dm-3 (NaHCO3). Under these conditions, the reaction rates were found to be first order with respect to sodium dithionite as plot of log kobs versus log [S2O42-] showed linearity to about 95% extent of reaction, however, the overall …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 2, Issue 2, 2016 · pp. 11–19 Read article
-
Model for Prediction of Pneumatic Proportional Integral Controller Transfer Function for Step Input Process Response
Abstract: Mathematical model was developed to monitor, predict and simulate the pneumatic proportional integral controller transfer function for step input process response. The model developed was based on the geometric arrangement as well as the distance of the flapper from the nozzle was considered to be small, where the capacitance C is constant and R is the resistance of the integral restrictor. The characteristics of the process was monitored, predicted and …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 4, Issue 1, 2018 · pp. 28–37 Read article
-
Investigation of Mass Transfer Coefficient and Gas Hold Up and Bubble Size Distribution in Novel Design of Stirred Tank Reactor
Abstract: Stirred tanks are commonly used in chemical industries for reaction and separation. Large-scale reactors include many impellers to improve mixing performance. Agitator plays an important role during the gas-liquid contact in two phase flow. And it is very necessary to know for the understanding of any gas-liquid system. So, in this study my motto is to study which parameters affects in the mixing of gas inside the liquid. The parameters …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 2, 2022 · pp. 5–12 Read article
-
Monitoring Fungi Transport Influenced by Heterogeneous Porous Sand Gravel Formation in Coastal Area of Port Harcourt
Abstract: This paper monitors the transport of fungi concentration in sand gravel formation, the formation were observed to develop heterogeneity in porous deposited strata, the migration process of fungi were observed from the simulation values through graphical representation, fluctuation of fungi concentration were experienced on the process of migration in exponential phase, the deposition of micronutrients were found to be under fluctuation in the soil thus affect the growth rate of …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 49–57 Read article
-
Awareness of Total Quality Management and Extent Used in Construction Projects
Abstract: Construction industry is a major sector in India with country’s GDP (Gross Domestic Product) of9% (2017) as per world bank. For increasing the share from such sector in this competitive environment TQM can be used as tool of strategy. TQM is a management strategy focusing on the customer satisfaction through continuous improvement of the process and enhancing team work. Here all employees associated with the project are involved to follow …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 2, 2020 · pp. 1–7 Read article
-
Outcome-based Education for Engineering Education: Challenges and Implementation Strategies in Nigerian Context
Abstract: Outcome-based education (OBE) is the way forward for coping with the rapid pace of globalization,effective technological development, effective lecture delivery, sustainable engineering practice, andhandling educational issues in Nigeria. This paper examined the challenges and implementationstrategies of OBE in the Nigerian context. The methodical approach of this paper involves checkinglecture delivery, research output, equipment of engineering faculties, and the quality of graduates inNigeria. Literature was reviewed especially on civil engineering education. …
Published in International Journal of Construction Engineering and Planning · Vol. 7, Issue 1, 2021 · pp. 6–13 Read article
-
Utilization of Industrial waste in construction Industry – a Review
Abstract: The reuse of industrial wastes will help in solving the environmental pollution issues associated with their disposal, but it will also increase the preservation of natural resources that are reducing rapidly. The major motivation of this project is the increase in waste products and increasing consumption of cement in construction industry. By reducing use of cement cost of construction can be reduced and it also reduces the environmental hazards produced …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 1, 2023 · pp. 57–62 Read article
-
Influence of Type and Size of Fine Aggregate on Glass Fiber Reinforced Self-Compacting Mortars (GFRSCM)
Abstract: Abstract This paper addresses the fresh and hardened state behavior of glass fiber reinforced self-compacting mortars (GFSCMs) with various types and sizes of fine aggregate. Mini-slump flow and mini V-funnel tests were performed to evaluate the workability of GFSCMs. Compressive strength, split tensile strength, and flexural strength tests at the end of 28 days of water curing were determined. Water sorptivity tests were conducted on 28-day cured cube specimens. The …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 63–71 Read article
-
EXPERIMENTAL INVESTIGATION ON GEOPOLYMER CONCRETE
Abstract: The project report entitled “Experimental investigation on alkali activated concrete” describes the detailed experimental work carried out on Alkali Activated Alumina-silicate concrete [Provis and Deventer, 2009]. The fly ash- Ground Granulated Blast Furnace Slag (GGBFS) based Alkali Activated Alumina-silicate concrete cured at ambient temperature was prepared by using different molarities of Alkali Activated solution namely 8M, 12M and 16M. The properties of concrete such as workability, compressive strength, Pull-out test/bond …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 17–22 Read article
-
A Review on Experimental Investigation of Fibre Reinforced Metakaolin-Based Geopolymer Concrete
Abstract: The development of new binders, as an alternative to Portland cement (PC), by alkaline activation, is a current researcher’s interest. As Concrete is the most commonly used material for construction. The worldwide production of cement has greatly increased after 1990. Production of cement results in a lot of environmental pollution as it involves the emission of CO2 gas. There are many ways to which we can reduce environmental pollution (carbon …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 44–55 Read article
-
Utilization of Waste Plastics as a Fiber in Concrete
Abstract: The rapid urbanization and industrialization all over the world has resulted in large deposition of plastic waste. Disposal of plastic waste in an environment is considered to be big hazard due to its very low biodegradability and presence in large quantities. In order to minimize the problem, the proposed concrete which is made by adding plastics in concrete may help to reuse the plastics and to study the properties of …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 56–60 Read article
-
Modulus of Elasticity of Steel Fiber Reinforced Concrete with Metakaolin
Abstract: In this paper the attempt has been made to study the results of an experimental investigation using steel fiber (SF) and metakaolin (MK) on the properties of structural concrete. Crimped steel fibers of aspect ratio 85 and MK were used in this investigation. The effects of these fiber and MK on workability, density, and on various strengths of M60 grade concrete are studied. Fiber content varies from 2.5% to 10% …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 50–59 Read article
-
Effect of varying water temperature on concrete properties
Abstract: The aim of this paper is to determine the effects of mixing-water temperature on the compressive strength, workability and water absorption rate of concrete. Locally available materials were used. Compression tests results showed that the 7 days value of 19.52N/mm2 at 35°C was higher than the value of 9.96N/mm2 at 5°C. The 28th day results for compression test also showed similar trend. The workability of the concrete decreased as the …
Published in International Journal of Concrete Technology · Vol. 6, Issue 1, 2020 · pp. 1–6 Read article
-
Application of Suitable Admixtures (Lime and RHA) for Improvement of Pavement Subgrade
Abstract: Abstract The quality of a pavement depends on the strength of its sub-grade. The present investigation has been carried out with easily available materials like lime and rice husk ash mixed individually and in combinations with different proportions. The different percentages of lime with respect to weight of dry soil were 2%, 4%, 6%, 8% 10% and for rice husk ash (RHA) were 3%, 6%, 9% and 12%. In each …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 1, Issue 2, 2015 · pp. 14–31 Read article
-
Research Insight on Everest Contaminated by Toxic Metals
Abstract: The goal of this investigation of the Everest was to look at follow component fixations and altitudinal patterns in soil and snow. Mount Everest was chosen since its remote area and amazing height disengages it from limited contamination sources. Soil tests were gathered from Mount Everest by different specialists and the examples were broke down for Pb, Zn, Cd, Ni, Cr, Co, Cu, As, Mn, Hg, and V utilizing inductively …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 2, 2016 · pp. 21–23 Read article
-
Study of Different Types of Concrete
Abstract: The main objective of the present paper is to study about the different types of concrete and its use according to its properties in different areas in our thesis we have briefly discussed about the property of the concrete. In this thesis, the use of concrete along with the addition of other material to make is more economical for the use and to get proper strength with addition of the …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 70–76 Read article
-
THE STRENGHT PARAMETERS OF SAW-DUST ASH ON THE GEOTECHNICAL PROPERTIES OF LATERITIC SOIL FOR ROAD CONSTRUCTION PURPOSES IN GHANA
Abstract: The strength parameters of saw dust ash on the geotechnical properties of lateritic soil for road construction purposes in Ghana have been investigated. The lateritic soil sample collected was subjected to the following test; Atterberg limits, compaction and California Bearing Ratio Test. The tests were conducted in accordance with BS: 1377 and AASHTO M145 standards. A varying percentage of the saw dust ash in order of 2%, 4%, 6%, 8% …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 1–9 Read article
-
Comparative Static Analysis of Flat Slab Without Periphery of Beam Provided Infill and Shear Wall Panel at Different Storey
Abstract: In this paper, increased awareness for the need to evaluate and improve the seismic performance of flat slab without periphery of beam. There are several numbers of factors affecting the behavior of building. Stiffness irregularity in vertical direction is one of them, and as a result of which soft storey is formed. In the this paper work a parametric study is performed on flat slab without periphery beam with infill …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 1, 2017 · pp. 37–44 Read article