Search
377 articles for “FE analysis”
-
“MODIFIED SEWING MACHINE WORKSTATION DESIGN BY USING TAGUCHI APPROACH”
Abstract: The study was based on design of experiment using Taguchi Orthogonal Array with three parameters namely height of sewing machine table, angular movement of sewing machine table & sliding movement of sewing machine table considered for experimentation. An orthogonal Array of L9 experimental design was adopted & 3 angles namely trunk angle, head angle & neck angle was measured for each experimental run. Then the reading for female & male …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 2, 2016 · pp. 61–88 Read article
-
A Descriptive Study to Assess the Mental Well-being and its Associated Factors among Migrants in Ottappalam Town, Palakkad
Abstract: The number of Kerala migrants as estimated by the migration survey in 2014 is 23.63 lakhs. The corresponding number was 22.81 lakhs in 2011, 21.93 lakhs in 2008, and 18.38 lakhs in 2003. These numbers indicating the migration from Kerala have been increasing since 2003. The study was to assess the level of mental well-being and its associated factors among the migrants in Ottappalam. A descriptive research design was used …
Published in International Journal of Neurological Nursing · Vol. 6, Issue 1, 2020 · pp. 27–31 Read article
-
Design and Analysis of “AKK” Shape Slot Antenna for S-Band Application
Abstract: An S-band patch feed Tamil letter “AKK” shape slot antenna for RADAR application is designed and presented in this paper. The proposed “AKK” shaped slot antenna is built on an air substrate with dielectric constant of 1.0006, a dimension of patch 40.5*40.5 mm, thickness of 1.6 mm, and loss tangent of 0.00827. The proposed antenna is designed over a frequency of 3.5 GHz. The antenna is designed and simulated using …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 1, Issue 1, 2015 · pp. 39–44 Read article
-
An Optimum Stringer for Straight and Curved Stiffened Panels Using X-FEM Techniques
Abstract: In this study, crack growth, modeling and simulation of various stiffened stringers, unstiffened straight and curved cracked panels are presented using commercially available finite element software package. Computation of stresses and convergence of stress intensity factor for single-edge notch specimens computed using finite element method (FEM) and extended finite element method (X-FEM) and compared with analytical solution. X-FEM techniques like cohesive segment method and linear elastic fracture mechanics, using virtual …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 4, Issue 2, 2018 · pp. 1–11 Read article
-
Eco-Friendly Chemical Processes: The Role of Green Chemistry in Modern Industries
Abstract: Green chemistry focuses on the development of chemical products and processes that minimize or eliminate hazardous substances, promoting sustainability throughout the chemical life cycle. Unlike environmental chemistry, which studies pollutants, green chemistry proactively designs safer alternatives to prevent environmental damage. This field spans multiple disciplines, including organic, inorganic, analytical, and physical chemistry, with applications across pharmaceuticals, manufacturing, and materials science. The principles of green chemistry, first formulated by Paul Anastas …
Published in International Journal of Green Chemistry · Vol. 11, Issue 2, 2025 · pp. 14–28 Read article
-
Steps involved in EEG Signal Analysis for Arm Movement
Abstract: This study delves into the intricacies of analyzing EEG signals associated with arm movement motor imagery. We explore established techniques across three key stages: data pre-processing, feature extraction, and classification for movement identification. By critically evaluating the strengths and weaknesses of each approach, we optimize the analysis pipeline for robust decoding of arm movement intent. This work empowers researchers and practitioners to transform raw EEG data into actionable insights, opening …
Published in International Journal of Microwave Engineering and Technology · Vol. 10, Issue 1, 2024 · pp. 43–55 Read article
-
Design and Finite Element Analysis of Go-Kart Tubular Chassis Using Ansys
Abstract: The design of a go-kart chassis involves the vehicle’s performance, safety, and handling characteristics. The present work focuses on the conceptual design, modeling, and structural analysis of a go-kart chassis aimed at achieving an optimal balance between strength, weight, and driver comfort using FEA software ANSYS. A detailed chassis model was developed based on ergonomic considerations and racing standards. The design was evaluated through an FEM approach to assess stress …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 56–64 Read article
-
Exploring Thermodynamic Heterocyclic Compounds: A Comprehensive Analysis
Abstract: Heterocyclic compounds constitute a significant class of organic molecules with diverse applications in various fields including pharmaceuticals, materials science, and agrochemicals. Understanding their thermodynamic properties is crucial for elucidating their behavior in different environments and optimizing their applications. This comprehensive analysis delves into the thermodynamic aspects of heterocyclic compounds, encompassing their synthesis, structural characteristics, and energetics. The review begins by outlining the fundamental principles governing the thermodynamics of heterocyclic compounds, …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 1, 2023 · pp. 40–46 Read article
-
Assess The Knowledge Regarding Reproductive Health Among First Semester BSc Nursing Students in Selected College, Vaniyamkulam
Abstract: Late adolescence is considered as a period of transition from childhood to adulthood. This period of life between ages of 17 to 24 years. This phase holds significant importance as it marks the formative years of an individual's life, during which major physical, psychological, and behavioral transformations occur. It is a critical and impressionable period, laying the foundation for assuming greater responsibilities, including embracing healthy and responsible parenthood in the …
Published in International Journal of Obstetrics, Perinatal and Neonatal Nursing · Vol. 10, Issue 2, 2024 Read article
-
Design and Implementation of Trans-Z-Source Inverter
Abstract: ABSTRACT This paper presents the impedance-source (Z-source) inverters concept to the transformer-based Z-source (trans-Z- source) inverters. The original Z-source inverter (ZSI) contains an impedance network of two inductors and two capacitors connected in a unique arrangement to interface the dc source and the inverter. It has buck and boost function that cannot be achieved by traditional voltage-source inverters and current- source inverters. In the proposed trans-Z-source inverter, the impedance network …
Published in International Journal of Distributed Computing and Technology · Vol. 4, Issue 2, 2018 · pp. 17–26 Read article
-
Two-dimensional MoS2 Nanosheets: Preparation and Characterization
Abstract: The amazing properties and useful applications of graphene in the field of sensors, electronics and material science opens a new challenges to other two dimensional semiconductor materials. Specially due to extraordinary electronic, mechanical and optical properties, molybdenum disulfide (MoS2) is attracting huge interest in several applications. Single layer MoS2 with direct band gap shows better semiconductor behavior such as photoluminescence, makes them more acceptable in optoelectronic applications in comparison with …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 2, 2019 · pp. 17–25 Read article
-
Fracture and crack propagations in plates - A review
Abstract: The development and applications of the boundary based finite element technique for fractured mechanics analysis are reviewed. Also, some researchers used the complex variable method and least boundary allocation method. In this method, most researcher investigated the 2-D isotropic, anisotropic and orthotropic materials for makes different types of plate such like this rectangular and circular with various cracks and hole cut-outs and these plates are used different types of bi-axial …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 1, 2018 · pp. 1–14 Read article
-
Women-Centric Healing Retreat Architecture: Translating Emotional, Social, Psychological, and Cultural Needs into Spatial Design
Abstract: This study investigates how the emotional, social, psychological, and cultural needs of women can inform the architectural design of healing retreat environments. Women often experience distinct pressures related to safety, emotional labour, social responsibilities, cultural expectations, and personal well-being, which can influence how they perceive and use spaces. Despite the growing interest in wellness architecture, many healing environments continue to follow gender-neutral approaches and may not adequately respond to women’s …
Published in International Journal of Landscape Planning and Architecture · Vol. 12, Issue 2, 2026 Read article
-
Enhancement K-Mean Algorithm (EKM) for Image Processing in MATLAB
Abstract: In this paper, a new segmentation scheme for the white blood cells from microscopic images is proposed. This is based on the K-means clustering technique. The RGB test images are converted to the L*a*b color space, and then the two color machinery (a and b) are used as features to the K-means clustering algorithm. The success of image analysis depends on segmentation reliability. The accurate partition of the image into …
Published in International Journal of Image Processing and Pattern Recognition · Vol. 1, Issue 2, 2015 · pp. 10–13 Read article
-
A Broad Review on the Impact of spring back/spring go During Bending Operation
Abstract: AbstractSpring back is the most important element impacting the perfection of sheet metal components because of the spring back properties of sheet metal, designing forming dies is particularly complex. This is a critical issue since spring back is a common forming issue with metal forming process using high-strength steel sheets. Once a stress is released, the material's elastic recovery forces the metal to spring back into shape. There are several …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 14–19 Read article
-
Influence of Surface Treatments on the Adhesion of Plant Fibers to Epoxy Resin
Abstract: Because of their primary benefits, moderate strength and stiffness, low cost, and the fact that they are a renewable, biodegradable, and environmentally safe material, natural fibers are seen to have potential use as reinforcing agents in polymer composite materials. Since they are inherently hydrophilic, moisture can easily build up on them, weakening or plasticizing the fibers’ adhesion to the surrounding matrix and affecting the performance of composite materials used in …
Published in International Journal of Agrochemistry · Vol. 11, Issue 1, 2025 · pp. 12–24 Read article
-
Optimizing Power Factor and Efficiency in EV Chargers: Bridgeless Isolated Zeta-Luo Converter Solutions
Abstract: This paper focuses on enhancing the power factor of Electric Vehicle (EV) chargers through the implementation of a Bridgeless Isolated Zeta-Luo Converter. Poor power factor is a common feature of conventional charging systems, which increases energy losses and decreases efficiency. It is critical to address the serious environmental problems that transportation-related hydrocarbon emissions represent in the modern world. Electric car adoption is picking up steam as a means of promoting …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 10, Issue 2, 2024 · pp. 1–7 Read article
-
Factors Influencing Exclusive Breast feeding among Mothers at Selected Urban Area, Coimbatore
Abstract: Child is a God's gift for a family. This study was conducted to assess the factors influencing exclusive breastfeeding among mothers. The aim of the study was to assess the knowledge, attitude regarding exclusive breast feeding and identifying the factors influencing breast feeding. Total 77 mothers were included in the study. Data was obtained using a structured questionnaire and analysis was done using descriptive and inferential statistics. Results showed that …
Published in International Journal of Pediatric Nursing · Vol. 6, Issue 2, 2020 · pp. 31–38 Read article
-
Evaluation of NPSB Fertilizer Rate to Improve Wheat Productivity in Cheha and Yem Districts of Southern Ethiopia
Abstract: Wheat is one of the major cereal crops produced in Ethiopia for the purpose of both home consumption and market; however, its productivity is low due to limited knowledge on rate of fertilizer application, low availability of soil nutrients. Therefore, this research was conducted in 2018 to 2019 during the main cropping season to determine best fertilizer rate for better production of wheat. The experiment consists of eight treatments such …
Published in International Journal of Plant Biotechnology · Vol. 8, Issue 1, 2022 · pp. 20–26 Read article
-
Design of Multistoryed Building Using STAAD Pro
Abstract: The chief aim of the current project is to analyze and design a multi-storeyed building [G +5 (3d frame)] using STAAD ProV8i. The design deals with the calculation of the load manually and analysis of the structure is done by STAAD Pro software. The method of design used by STAAD pro as per Indian code is Limit State Design. STAAD.Pro features a state-of-the-art user interface, visualization tools, with advanced finite …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 1, 2017 · pp. 7–16 Read article