Search
48 articles for “polyethylene”
-
Density-Based Separation and Polymer Type Verification of Mixed Post-ConsumerThermoplastic Streams: A Sequential Separation and Contamination Reduction Protocol for Secondary Polymer Supply Chains
Abstract: The separation of mixed post-consumer thermoplastic waste streams into polymer-type-specific fractions suitable for industrial reintegration is a fundamental chemical separation challenge in secondary polymer supply chains. Density-based separation, exploiting the characteristic density ranges of common thermoplastic polymers, remains the dominant first-stage separation technique in commercial recycling operations due to its low cost, scalability, and applicability across mixed waste stream compositions. This paper presents a sequential separation and contamination reduction protocol …
Published in International Journal of Chemical Separation Technology · Vol. 12, Issue 2, 2026 Read article
-
Study on Properties of Concrete Cured With Poly Ethylene Glycol-600
Abstract: After water, concrete is the most using material globally. Without concrete, the world is unimaginable. The foundation of civilization is concrete. Coarse aggregate, cement ,fine aggregate and water are the main ingredients in concrete, which requires curing to attain its strength. Concrete must therefore cure for 28 days in order to complete the necessary hydration, desired strength. For the traditional curing processes, a lot of water is needed. This becomes …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 14–21 Read article
-
Physical Property of Self-Curing Concrete With Shrinkage Reducing Agent
Abstract: Water is a most widely used material for construction work, it is essential for concreting work or plastering work, etc. Curing is the process for controlling the temperature and consists of moisture movement from and into the concrete and the hydration of the cement and consequently continuous increase in the strength and Curing allows continuous hydration of cement, when curing stops strength increasing of the concrete also stops. The aim …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 1, 2017 · pp. 29–33 Read article
-
Blue Shift of Sol-gel Synthesized ZnO Nano-particles: Size Dependent Quantum Confinement Effect
Abstract: Zinc oxide nano-crystals with different size and shape were synthesized by sol-gel technique at 90°C. ZnO nano-particles show (100), (002), (101), (102), (110), and (103) crystalline orientation and strong band-edge emission at 408 nm. Grain size of ZnO nano-crystals varies from 4 nm to 20 nm due to variation of molar ratio of polyethylene glycol with zinc acetate during synthesis. ZnO nano-materials with grain size 4 nm and 8 nm …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 1, Issue 1, 2015 · pp. 8–15 Read article
-
Virgin-Recycled Thermoplastic Matrix Systems as Engineered Composite Materials: A Compositional Framework for Mechanical Property Retention in Secondary Polymer Supply Chains
Abstract: Virgin-to-recycled thermoplastic resin blends, while conventionally treated as simple two- component mixtures in secondary polymer supply chains, exhibit compositional and morphological characteristics that are more accurately described using the framework of engineered composite matrix systems. This paper presents a compositional framework for understanding and predicting mechanical property retention in virgin-recycled polypropylene (PP) and high-density polyethylene (HDPE) matrix systems, developed through more than twenty years of commercial secondary polymer distribution practice …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 Read article
-
Mechanical and Thermal Performance Comparison of Nylon 6 and PET Spur Gears via Fusion 360 Finite Element Simulation
Abstract: *Author for CorrespondenceSiddesh BE-mail: [email protected] Student, Department of Mechanical Engineering, University B.D.T College of Engineering, Davanagere, Karnataka, India. Received Date: October 29, 2025Accepted Date: November 07, 2025Published Date: November 17, 2025 Citation: Siddesh B. Mechanical and Thermal Performance Comparison of Nylon 6 and PET Spur Gears via Fusion 360 Finite Element Simulation. International Journal of Mechanics and Design. 2025; 11(2): 1–7p. Abstract Polymer gears are increasingly used in engineering applications …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 2, 2025 · pp. 1–7 Read article
-
Experimental Study on Charging Conditions of a Single Component DDT Detonator Using Nickel Hydrazine Nitrate
Abstract: As a salt of a coordination compound of nickel, nickel hydrazine nitrate (NHN) is an energetic substance with characteristics halfway between those of primary and secondary explosives. It is less sensitive to friction and mechanical impact than other primary explosives, although it is highly sensitive to flames. NHN is not very dangerous to handle, but it explodes readily when exposed to flame. This property makes it possible to fabricate safety …
Published in International Journal of Energetic Materials · Vol. 11, Issue 2, 2025 · pp. 1–12 Read article
-
Nanofibers of Ultra-High Molecular Weight Polypropylene (UHMWPP) Composites: Processing, Properties and Applications
Abstract: The nanofibers of ultra-high molecular weight polypropylene (UHMWPP) composite made with polyethylene terephthalate (PET) by electrospinning process. The high-temperature setup developed by hardware modifications in electrospinning machine to perform such experiments. Bilayer composite mat of UHMWPP and PET nanofiber was fabricated by deposition of monolayer of UHMWPP over PET monolayer by electrospining process. The developed composite mat products were characterized by SEM, DSC and other physico-chemical methods. The composite mat …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 1, 2025 · pp. 35–48 Read article
-
Transforming Waste Plastics Through Pyrolysis: A Sustainable Solution for Polymer Resource Recovery
Abstract: The global accumulation of plastic waste, particularly polymers like polyethylene (PE), presents amajor environmental challenge, demanding innovative solutions for effective management. This studyfocuses on the chemical process of pyrolysis as a promising approach for polymer resource recoveryand environmental sustainability. Pyrolysis involves the thermal decomposition of plastic waste intovaluable products, such as liquid fuels, gases, and solid residues. Key parameters, such as temperature,heating rate, and residence time were optimized to enhance …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 2, 2024 · pp. 12–19 Read article
-
Plant-Drive Natural Fiber Reinforced ThermoplasticComposites by Film Stacking Method
Abstract: Fiber reinforced polymer composites have a long history of being significant in a variety of applications because of their exceptional specific strength and modulus. An alternative to synthetic polymers that pollute the environment is provided by thermoplastic and vetiver fiber (VF) composites. In comparison to conventional reinforcing fibers (glass and carbon fiber), natural fibers (such as banana, sisal, coir, jute, vetiver, flax, hemp, and kenaf) have the following benefits: they …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 29–39 Read article
-
The Potential of Bacterial Nanoparticles in Vermicast: Facilitating Microplastic Biodegradation for Environmental Remediation
Abstract: Globally, the plastic pollution has become a major issue that poses a major threat to the soil ecosystem. Plastic degradation is a quite challenging process as plastic persists in the environment for longer durations causing harm to surrounding flora and fauna. Polyethylene is most abundantly found as a contaminant in the environment. It may enter the food chain causing harm to health. The dynamics of microplastic pollution in soils, as …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 10, Issue 1, 2024 Read article
-
Tensile and Flexural Strength Characteristics of PET Strap Fibre Reinforced Concrete
Abstract: Polyethylene terephthalate is a synthetic material referred to as PET. Strapping, basically is the process of stacking with the help of numerous straps and strapping tools. PET strap is in fact a sturdy material used for packaging of several goods. PET strap has an increased temperature resistance and high tensile strength. It is generally used for packaging and bundling. In this experimental work, PET straps are used in concrete in …
Published in International Journal of Architecture and Infrastructure Planning · Vol. 5, Issue 1, 2019 · pp. 10–17 Read article
-
Investigation on Trans-esterification of Terephthalic Acid and Ethylene Glycol for the Production of Polyester Fibers.
Abstract: ABSTRACTThere have been considerable efforts to produce renewable polymers from biomass. Poly(ethylene terephthalate) (PET) is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liiquids and foods, thermoforming for manufacturing ,etc.The monomer bis(2-hydrooxyethyl) terephthalate can be synthesized by the esterification reaction between terephthalic acid and ethylene glycol with water as a byproduct, or by transesterification reaction between glycol and dimethyl …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 2, 2020 · pp. 6–11 Read article
-
Preparation and Performance Evaluation of LDPE/Rice Starch Blend Composites by Extrusion Method
Abstract: Discarding synthetic polymers such as low-density polyethylene (LDPE) used in food packaging ingredients is today considered a serious ecological threat because they are non-decomposable. The goal of this article is to create a decomposable polymer by incorporating a bio-polymer (starch) into its polymeric matrix. This article focuses on the preparation and characterization of rice starch (RS)-mixed LDPE decomposable polymer. In the first study, the effect of variability of RS content …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 1, 2022 · pp. 1–22 Read article
-
Chemical Engineering Analysis of Polymer Composite Creation Using Sawdust, Sharp
Abstract: Polyethylene terephthalate (PET) is known for its general adoption for its lightweight and flexibility and durability nature. It is non-biodegradable and contributes majorly to water and land pollution. The amount of plastic-generated waste is increasing extensively following its usefulness there and the inability of users to properly dump or recycle it has resulted in a big threat to the environment. In this research work an attempt has been made to …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 17–29 Read article
-
Study on Mechanical and Physical Properties of Wood-Plastic Nanocomposites after Fiber Surface Treatment
Abstract: Numerous composites based on high-density polyethylene (HDPE), wood flour (WF), and nanoclay (Cloisite 30B) were prepared by melt compounding followed by injection mold. This paper aims to evaluate the feasibility of using HDPE and underutilized WF as a material for the development of woodplastic composites, as well as the strengthening effect of nanoclay on them. To develop the poor interfacial interaction between the hydrophilic WF and hydrophobic HDPE matrix, as …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 43–53 Read article
-
The Improvement of Polyvinyl Chloride Synthesis Using Different Approaches
Abstract: Polyvinyl chloride (PVC) is produced by the polymerization of the vinyl chloride monomer either by direct chlorination of olefins or by addition of hydrogen chloride to acetylene. The polymerization conditions are: heat, peroxides or oxidizing agents with basic structure as -CH2CHCl.CHCl-CH2.CHCl-. Polyvinyl chloride is a thermoplastic and its plasticity can be increased by incorporating ‘plasticizers’ of relatively low molecular weight organic materials during molding or extrusion. PVC has high hardness …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 6, Issue 2, 2020 · pp. 48–52 Read article
-
Deciphering Foam: Exploring Antifoaming Agents and Their Mechanism
Abstract: Antifoaming agents are critical additives employed in industrial processes to counter foam formation, which can hinder efficiency and cause equipment damage. These agents, available in various formulations like silicone-based, mineral oil-based, and polyethylene glycol-based, are selected based on specific foam properties and operating conditions. Choosing the right antifoam agent is crucial, with silicone-based ones often preferred for their stability and effectiveness across different pH levels and temperatures. Conversely, mineral oil-based …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 9, Issue 2, 2023 · pp. 32–36 Read article
-
To Study About Use of Plastic Waste in Flexible Road Construction
Abstract: The plastic wastes can be used in road construction and the field tests endured the stress and proved that the plastic wastes used after proper processing as a preservative would enhance the lifespan of the roads and also solve environmental problems. Plastic use in road construction is not new. It is already in use as PVC or HDPE pipe mat passages built by mending composed of PVC (polyvinylchloride) or HDPE …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 12–17 Read article
-
Experimental Study on the Properties of Self-Curing Concrete
Abstract: This paper highlights the effect of curing agent polyethylene glycol (PEG-400) in the performance of concrete. The chemical agent PEG is used with different percentage; 1%, 2% and 3% to the weight of cement. Super plasticizer named glenium was used to improve the workability of concrete. The property such as compressive strength and split tensile strength of concrete was examined with normal curing and self-curing at 7 days and 28 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 8–13 Read article