Search
236 articles for “Copper/Zinc Dual-Doped Microneedles”
Nothing matched all of your words, so these match any of them.
-
Wearable Textile Antenna for Body Centric Wireless Application
Abstract: This article introduces minimal effort wearable textile antenna with the absconded ground is proposed. The foreseen antenna can get the recurrence between 2.185 and 6.625 GHz. An examination between the measured result and the estimated result has been considered in this article. The foreseen wearable antenna is appropriate to get radio wave vitality accessible in the range of 2.185–6.625 GHz. Keywords: copper tape, flexible antenna and CST software, jeans substrate, …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 2, 2018 · pp. 27–32 Read article
-
Design and Analysis of Broadband Flexible Antenna for Remote System
Abstract: ABSTRACT In this anticipated antenna, jeans have been utilized as a substrate. The dielectric constant of substrate is 1.7 and patch has been made by copper tape. The benefits of jeans are long wearing, simple consideration attire, and cost effective. This anticipated antenna provides gain of 3.592 dBi at 5.27 GHz. In this paper, the analysis has been focused on S11, radiation pattern, directivity and polar plot. Keywords: Jeans, microstrip …
Published in International Journal of Microwave Engineering and Technology · Vol. 5, Issue 1, 2019 · pp. 19–23 Read article
-
A Microstrip Rat-Race Coupler for Narrow-Band Operation in the X-Band
Abstract: This paper proposes, designs, describes, analyses, and simulates a novel microstrip rat-race coupler for narrow-band operations in the X-band (8 GHz to 12 GHz), namely the 9.5 GHz to 10.3 GHz sub-band. This proposed four-port passive microwave device was realized utilizing microstrip technology with pure copper (lossy) being used as a metal in the conducting layers (transmission and ground plates) and Rogers TMM6 (lossy) being used in the dielectric layer. …
Published in International Journal of Microwave Engineering and Technology · Vol. 7, Issue 1, 2021 · pp. 18–22 Read article
-
A Meandered Spiral Antenna for Operation in the X-band
Abstract: This study proposes a wideband meandered spiral antenna based on microstrip technology for optimal operation in the X-band (8 GHz to 12 GHz). This design is based on a two-arm Archimedean spiral antenna with a coaxial feed line. This antenna exhibits good performance for operations in the X-band. This antenna was simulated with FR-4 being used as the dielectric and copper for the metallization and ground plane. This antenna was …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 4, Issue 2, 2018 · pp. 15–19 Read article
-
High-k and Low-k Gate Dielectric Stacking for Low Voltage Organic Thin Film Transistors
Abstract: Electrical performance parameters of Organic thin film transistor (OTFT) are closely related to the interface characteristics of gate dielectric and organic semiconductor film. Henceforth, it becomes important to study the effect of gate dielectric stacking on device performance of OTFTs. In this paper, we demonstrate the stacking of high-k and low-k gate dielectric based Single and Dual gate OTFTs. The structural effect of Organic thin film transistors is methodically explored …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Studies on the Electrical Characteristics of Single-Heterojunction GaN based HEMTs with AlGaN Nano-Layer of 21 nm
Abstract: In this work, we have studied the electrical characteristics of single-heterojunction AlGaN/GaN high electron mobility transistors (HEMTs). The effects of drain voltage and gate voltage on variations of drain current have studied on the basis of simulated HEMT structures. Also, we have studied the effects of aluminium mole fraction, gate length and doping concentration on variations of drain current based on the simulated HEMT structures. This present work will be …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 2, 2019 · pp. 26–38 Read article
-
Nanostructured Metal Oxides as Promising Electrode Materials for Microbial Fuel Cells
Abstract: Microbial fuel cells (MFCs) are emerging as a promising technology for generating sustainable energy from organic waste materials. One of the key challenges in developing efficient MFCs is the selection of suitable electrode materials. In recent years, nanostructured metal oxides have gainedconsiderable attention as electrode materials for MFCs due to their unique structural and electrochemical properties. This review highlights the recent progress in the development and application of various types …
Published in International Journal of Applied Nanotechnology · Vol. 8, Issue 2, 2022 · pp. 23–30 Read article
-
Basic Fundamentals of Different Solar Cells, Solar Energy Materials and Photovoltaic Performances
Abstract: Solar cell is one of the thrust areas of modern technology in the field of renewable energy. Crystalline semiconductor wafer based solar cells (SCs) (thicknesses almost 200–300 μm) mainly crystalline-Si or GaAs based solar cells are playing the legend role in last few decades. With technological revolution, thin film SCs (thickness range 1–2 μm), dye-sensitized or Graetzel, organic/polymer and plasmonic solar cell respectively are known as 2nd,3rd, 4th and 5th …
Published in International Journal of Energetic Materials · Vol. 1, Issue 1, 2015 · pp. 1–9 Read article
-
A Review on Modified TiO2 Nanostructured Materials in DSSC
Abstract: Dye sensitized solar cells DSSCs emerged as a new class of low cost energy conversion devices with simple manufacturing procedures and environmentally friendly character.TiO2 controls the light harvesting and confinement properties of the cell, in addition to preventing charge recombination and promoting charge transport toward the anode. These last two parameters are major factors in determining the charge collection efficiency. The particle size and shape, crystallinity, surface morphology and chemistry …
Published in International Journal of Energetic Materials · Vol. 1, Issue 1, 2015 · pp. 10–21 Read article
-
Investigations of Ruthenium an Energetic Material
Abstract: The energy of ruthenium catalyzed degradative oxidation of methylparaben by the copper complex, is researched at 30ºC and at an ionic strength of 60 × 10−3mol dm−3. In the presence of catalyst ruthenium(III), the reaction between methyl and diperiodatocuprate in aqueous alkaline medium exhibits 1:1 stoichiometry.
Published in International Journal of Energetic Materials · Vol. 2, Issue 1, 2016 · pp. 27–30 Read article
-
A Short Review on Surface Plasmon Polaritons (SPPs) and Its Applications
Abstract: A surface plasmon polariton (SPP) is a two-dimensional electromagnetic (EM) mode occurring at the interface of noble metals whose amplitude exponentially decay down to zero when going away from the boundary of the metal. In the last five decades, the investigation is done related to understanding of the excitation of SPPs and their interaction with the features related to the surface of metals. The dispersion of light from the nanostructured …
Published in International Journal of Energetic Materials · Vol. 5, Issue 1, 2019 · pp. 21–35 Read article
-
Cause of a Serious Condition Blasts’ Liquid for Airbag Classification
Abstract: The explosion was fairly strong, and the entire unit was blasted into the air. In front of the airbag, there is a thin layer of plastic casing, which is ripped by the pressure that is developing within during the explosion. The airbags inflate as a result of the explosion. The chemical used in the airbag is sodium azide. These detectors in front of the automobile transmit an electrical impulse to …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 38–42 Read article
-
Enhancing the Flame Resistance of Hybrid Composite Materials with Inorganic Retardants
Abstract: Fire safety is a crucial component of measures with the goal of minimizing damage from restricting the spread of fires, preventing flashover, and measuring how to inhibit their beginning. It is feasible to flee for a longer amount of time if flames are prevented or delayed. Consequently, it effectively protects property, health, and life. Polymer characteristics that resist heat and fire frequently altered through the addition of particulate fillers. Numerous …
Published in International Journal of Energetic Materials · Vol. 8, Issue 2, 2022 · pp. 1–9 Read article
-
MANUFACTURING AND TESTING OF CNT BLENDED NAVAL BRASS
Abstract: The Utilization of advanced technologies increased the scope of producing new materials drastically .as a result wide spectrum of nanomaterials are being produced these materials are manufactured as per the desired properties in the final material /composite. The aim of this study is to investigate the effect of CNT (Carbon Nano Tubes) reinforcement into naval brass (Cu-CNT 60%, Zinc 39%, and Tin 1%) naval brass is widely applied in the …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 7–11 Read article
-
Ferromagnetism in II-VI Diluted Magnetic Semiconductor, Zn0.96Mn0.04O Nanostructures by Green’s Theorem
Abstract: Ferromagnetism in II-VI diluted magnetic semiconductor, Zn0.96Mn0.04O is studied. Using the Heisenberg principle, the spin exchange between the neighboring spin is discussed. Heisenberg’s model describes the Hamiltonian of the system in terms of spin density and excitons. Mathematically, magnetic parameters such as magnetizations and magnetic susceptibility are determined by Green’s function. Ferromagnetism is expected from sp-d exchange interactions (RKKY), point defects such as oxygen vacancies, and Zn interstitial and quantum …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 28–36 Read article
-
Floral System Act as a Reservoir for Nanobiotechnology (Silver Nanoparticles)
Abstract: The coming era of Nanotechnology is considered the first book on the topic of nanotechnology. It consists of processing of separation, consolidation and deformation of materials by one atom or by one molecule. There are two main approaches used in nanotechnology such as 1) “bottom-up” approach in which materials or devices are built from components and assemble themselves chemically by the principles of molecular recognition 2) “top-down” approach reflects the …
Published in International journal of Nanobiotechnology · Vol. 1, Issue 1-2, 2015 · pp. 5–7 Read article
-
Recent advances in utilization of wide band gap metal oxides for photocatalysis of organic waste
Abstract: Water cleaning has become a major challenge in the current scenario with huge amounts of industrial wastes being accumulated in the water bodies over the years. Traditional chemical, physical and biological processes for treating wastewater containing textile dye have disadvantages such as high cost, high energy requirement and generates secondary pollution during treatment process. The progressive oxidation processes technology has been appealing growing attention for the decomposition of organic dyes. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 1–9 Read article
-
Future prospects for DSSCs and its fabrication parameters with efficiency enhancement
Abstract: Dye-sensitized solar cells which combine the unique properties of both the organic compound and inorganic compound have attracted the attention of scientists. Thin film of TiO2 paste deposited on ITO (Indium doped Tin Oxide) acts as one electrode, Carbon electrode acts as counter electrode and ruthenium as the sensitizer. I-/I3- is used as the electrolyte. An increase of output potential when the cell was heated over a short period of …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 1, 2019 · pp. 18–30 Read article
-
Fabrication, Microstructure and Mechanical Behavior of Aluminum Alloy (LM-13) Reinforced with Nano-ZrO2 Particulate Chilled Nano-Metal Matrix Composites (CNMMCs)
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with ZrO2 particulates in the weight percent ranging from 3 wt.% to 12 wt.% in the steps of 3 wt.%. The reinforcement i.e., ZrO2 particle size added varies between 100–200 nm. The resulting CNMMCs are solidified under the influence of copper chill of 25 mm thickness to study the effect …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 2, 2020 · pp. 17–30 Read article
-
Magnetic Field Guided Diluted Magnetic Semiconductor, ZnxFe2-xO3 Nanoparticles for Biomedical and Biosensing Application
Abstract: The magnetic field guided nanoparticles are studied in the viewpoint of diluted magnetic semiconductor. Different structures and properties associated with Zn doped αFe2O3 nanostructures are presented in theoretical formulations. In addition, scientific methods of synthesizing particularly Solvothermal and biological methods of synthesizing Zn0.6Fe1.6O3 nanoparticles are discussed. More emphasis is given to the essence of nanotechnology from non-organic to organic matter namely nanoparticles of Zn0.6Fe1.6O3 to DNA. For in vivo or …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 1, 2022 · pp. 1–18 Read article