Search
148 articles for “recycling”
-
Abrasion resistance, compressive strength and elasticity modulus of recycled aggregate concrete (RAC) included lower quality recycled aggregate with and without silica fume
Abstract: The usage of recycled aggregate (RA) for concrete works is spreading for gaining wide acceptance around the world, and total amount of RA utilized in concrete industry increases day-by-day. RA is used in many concrete products, such as concrete interlocking blocks, pavements, etc. One of the physical causes of concrete deterioration is surface wear or loss of mass for concrete products which are especially exposed to vehicular traffic (i.e., industrial …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 1–18 Read article
-
Managing E-Waste with Technology: Recycling Potential
Abstract: E-waste is a major environmental and health issue in the digital age. Rapid technical breakthroughs and rising electronic device consumption have increased global e-waste volumes. To reduce environmental risks, recover valuable resources, and promote sustainability, e-waste must be managed and recycled. This article discusses how technology is improving e-waste collection, sorting, and recycling. It shows the possibilities of AI-powered garbage sorting systems, IoT integration for waste stream tracking, and hydrometallurgy …
Published in International Journal of Green Chemistry · Vol. 11, Issue 1, 2025 · pp. 1–7 Read article
-
Second-Life Battery Applications and Recycling Technologies of EV in India: A Comprehensive Review
Abstract: Abstract The rapid uptake of electric vehicles (EVs) worldwide is creating a new challenge of end-of-life (EoL) lithium-ion batteries (LIBs). As EV penetration accelerates under national initiatives such as the National Electric Mobility Mission Plan and Faster Adoption and Manufacturing of Electric Vehicles (FAME), the country faces an emerging challenge of managing end-of-life batteries. This paper examines technical pathways for second-life reuse of EV batteries (e.g. stationary energy storage, grid …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 1, 2026 · pp. 15–24 Read article
-
Overview on the Thermal Properties, Geometric Structure and Recycling Process of Thermoplastic Materials.
Abstract: This study is aim to discuss the thermal properties, geometric structure and recycling process of thermoplastic materials. Also, recycling is one of the most important actions currently available to reduce the negative impact on the environment and represent one of the most dynamic areas in plastics industry today. Thermal properties, geometric structure and recycling process of thermoplastic materials deals with the properties of thermoplastics which includes: it may melt before …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 2, 2020 · pp. 20–24 Read article
-
Virgin-Recycled Thermoplastic Matrix Systems as Engineered Composite Materials: A Compositional Framework for Mechanical Property Retention in Secondary Polymer Supply Chains
Abstract: Virgin-to-recycled thermoplastic resin blends, while conventionally treated as simple two- component mixtures in secondary polymer supply chains, exhibit compositional and morphological characteristics that are more accurately described using the framework of engineered composite matrix systems. This paper presents a compositional framework for understanding and predicting mechanical property retention in virgin-recycled polypropylene (PP) and high-density polyethylene (HDPE) matrix systems, developed through more than twenty years of commercial secondary polymer distribution practice …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 Read article
-
Production and Evaluation of Composites Made from Waste Material and Recycled Poly(Ethylene Terephthalate)
Abstract: A significant ecological concern that third-world countries are currently facing is the economically viable use of lignocellulose waste. In addition to reducing the cost of the composite, cellulosic fiber composites created from industrial waste would enable the efficient use of a waste material that is presently disposed of or burned. Recycled poly (ethylene terephthalate) was used in this work as a major phase (matrix) and industrial waste material was used …
Published in International Journal of Energetic Materials · Vol. 11, Issue 1, 2025 · pp. 1–12 Read article
-
Cost-Effective Procedure of Agarose Gel Recycling
Abstract: Agarose gel electrophoresis is a commonly used technique in various areas of biotechnology. This pretentious but specific analytical procedure is used in research, biomedical, and forensic laboratories. Agarose gel recycling is a realistic approach for molecular genetic studies. Reuse of agarose gel for daily routine experiments to save money due to limited financial resources for research. This practice satisfies a need to control expenses. Recycled agarose can be used for …
Published in International Journal of Animal Biotechnology and Applications · Vol. 1, Issue 2, 2015 Read article
-
Exploring the Integration of Recycled Waste Materials in Concrete: A Comprehensive Overview
Abstract: The utilization of recycled materials from construction sites has experienced a notable increase in recent times, driven by the principle of efficient resource usage established by the International Council of Building in 1994. Recycled materials, including recycled concrete aggregate or brick aggregate sourced from construction and demolition waste, waste glass from municipal waste or recycled sources, and gypsum from gypsum boards, are being increasingly employed as substitutes for primary raw …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 26–34 Read article
-
Green Engineering of Wood-Plastic Composites: Utilizing Recycled Plastics for Environmental Sustainability
Abstract: This study explores the fabrication of wood-plastic composites (WPCs) using recycled polymers and natural fibers, aiming to create a renewable and durable alternative to traditional wood products. Utilizing agricultural and industrial waste as the raw materials, the research integrates various polymer blends with wood flour and other lignocellulosic fibers, enhancing mechanical and thermal properties. The innovative approach involves modifying the polymer matrix with eco-friendly additives to improve compatibility, adhesion, and …
Published in International Journal of Green Chemistry · Vol. 10, Issue 2, 2024 · pp. 8–16 Read article
-
An overview on the rheology of recycled aggregate concrete with the influence of chemical admixtures
Abstract: : Concrete is one of the most widely used construction material because of its property to be moulded into any kind of structure and shape due to its fluidity at early stages. The fresh properties of concrete can be characterized by its flow behaviour. Rheology is the scientific description of flow properties. Super-plasticizers and air-entrainers are some of the most used chemical admixtures that affect the rheological parameters of fresh …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 14–24 Read article
-
Regration Analysis of Compressive Strength of Recycled Aggregate Concrete with Ground Granulated Blast-Furnace Slag and Fly Ash
Abstract: In this research work presents the compressive strength of recycled aggregate concrete (RAC) with recycled coarse aggregate (RCA) that coming from single source and the results of an investigation on the influence of recycled coarse aggregate (RCA) on compressive strength of recycled concrete are accessible. Natural aggregates concrete cubes were cured in normal water for 28-days obtain virgin and RCA. The properties of natural coarse aggregate (NCA) and (RCA) and …
Published in International Journal of Concrete Technology · Vol. 8, Issue 1, 2022 · pp. 9–16 Read article
-
PREDICTION OF RECYCLED CONCRETE AGGREGATE SELF COMPACTING CONCRETE COMPRESSIVE STRENGTH USING MATHEMATICAL MODEL
Abstract: Sustainable Development aims at improving the standard of life without compromising the environmental qualities and for future needs. These objectives can be achieved through recycling of construction/demolished waste. In Past, land filling of Construction and Demolished waste materials was the general solution. As raw Construction Material Charges have risen dramatically, we have to look for alternative solutions and methods, such as recycling of demolished waste. Recycled Aggregate Concrete not only …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 34–43 Read article
-
Flexural Behavior of Recycled Asphalt Concrete
Abstract: The operational health of the road network is of the utmost importance for economic and social life. Fatigue life is affected by the growth and accumulation of cracks, under the action of repeated vehicular loading, aging and effect of the environment. The flexural behavior of asphalt concrete depends mainly on the flexibility of the pavement mixture which deteriorate gradually with time. Recycling could be a suitable action to reserve such …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 2, 2018 · pp. 32–37 Read article
-
Recycling Multilayer Materials: Discovering Mechanical Parameters for Engineering Applications
Abstract: Multilayer materials have been widely used in various applications such as packaging, electronics, and construction industries. However, the disposal of these materials is becoming a significant environmental concern due to their non-biodegradable nature. Therefore, the recycling of multilayer materials has become an essential aspect of sustainable waste management. The mechanical characteristics of materials recycled from multilayer products were examined in this study. The focus was on determining the impact of …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 43–47 Read article
-
Study of Recyclable Thermoset Polymers Using Dynamic Covalent Bonds
Abstract: Thermoset polymers are widely used in advanced engineering applications due to their excellent mechanical strength, thermal resistance, and chemical stability. However, their permanent three-dimensional cross-linked networks make them traditionally non-recyclable, contributing significantly to polymer waste and environmental challenges. In recent years, dynamic covalent chemistry (DCC) has emerged as a transformative approach for designing recyclable thermoset materials by incorporating reversible and exchangeable bonds within their structure. This project focuses on the …
Published in International Journal of Energetic Materials · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Preparation of Aluminium Foam using Recycled Beverage Cans, Na-CL salt and Discarded Dry Battery powder
Abstract: In this work, an attempt has been made to prepare Aluminium Foam by using recycled beverage cans, dry battery powder and Sodium Chloride (Nacl) powder particles. Three samples were prepared with the following combinations: Sample I = 2 kg of recycled Aluminium cans + 10 wt. % of Nacl salt and 10 wt. % of dry battery powder particles; Sample II = 2 kg of recycled Aluminium cans + 15 …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 2, 2018 · pp. 38–42 Read article
-
Sustainable Metallurgy: Recycling and Eco-friendly Practices in Alloy Production
Abstract: The modern metallurgical industry faces a growing imperative to adopt sustainable practices to mitigate environmental impacts and conserve natural resources. This paper explores the advancements in sustainable metallurgy, emphasizing recycling and eco-friendly practices in alloy production. Key strategies include the development of closed-loop recycling systems, where end-of-life metal products are efficiently reprocessed to minimize waste and reduce the need for virgin raw materials. Innovations in alloy design, such as the …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 2, 2023 · pp. 18–23 Read article
-
From Waste to Walls: A Comparative Study of Recycled Buildings in India
Abstract: As the construction sector across the world is compelled to rein in its environmental impact – currently, estimated at nearly 40% of global carbon emissions – the use of recycled materials is no longer a secondary aesthetic option but a structural imperative. This paper presents a comparative study of pioneering Indian architectural projects that assess the effectiveness of diverted waste streams in contemporary construction. Three iconic projects to be discussed …
Published in International Journal of Sustainable Building Technology · Vol. 9, Issue 2, 2026 Read article
-
Design and Commercial Validation of a Hierarchical Three-Tier Quality GradingSystem for Post-Industrial and Post-Consumer Recycled Thermoplastic Resins in US Industrial SupplyChains
Abstract: Quality grading systems for recycled thermoplastic resins providing industrial buyers with a standardized, documented quality classification framework for secondary raw material procurement are a foundational requirement for the reliable integration of recycled materials into industrial supply chains. Despite this requirement, no standardized grading scale has been established for post- industrial and post-consumer PP, HDPE, and LDPE resins in industrial supply chain contexts. This paper presents the design, operational implementation, and …
Published in International Journal of Polymer Science and Engineering · Vol. 12, Issue 2, 2026 · pp. 1–22 Read article
-
Enhancing Concrete Sustainability: A Critical Review of Recycled Aggregate Practices
Abstract: The surge in construction material demand, propelled by urbanization, necessitates sustainable wastemanagement strategies. Recycling demolished waste into concrete has gained prominence due toenvironmental concerns and resource depletion. This review consolidates insights gleaned fromvarious studies on the utilization of recycled coarse aggregates (RCA) in concrete. Investigationsreveal that water absorption in RCA depends on adhered mortar quality, impacting mechanicalproperties. Various alternative materials and their mechanical performance are explored, highlightingtheir superiority. Studies emphasize …
Published in International Journal of Construction Engineering and Planning · Vol. 10, Issue 1, 2024 · pp. 7–13 Read article