Preparation of Aluminium Foam using Recycled Beverage Cans, Na-CL salt and Discarded Dry Battery powder

Francis Xavier L; Ben Rajesh; Ajith C. Ravi; Madan Kumar T.S

International Journal of Chemical Engineering and Processing

Preparation of Aluminium Foam using Recycled Beverage Cans, Na-CL salt and Discarded Dry Battery powder

Abstract

In this work, an attempt has been made to prepare Aluminium Foam by using recycled beverage cans, dry battery powder and Sodium Chloride (Nacl) powder particles. Three samples were prepared with the following combinations: Sample I = 2 kg of recycled Aluminium cans + 10 wt. % of Nacl salt and 10 wt. % of dry battery powder particles; Sample II = 2 kg of recycled Aluminium cans + 15 wt. % of Nacl salt and 15 wt. % of dry battery powder particles; Sample III = 2 kg of recycled Aluminium cans + 20 wt. % of Nacl salt and 20 wt. % of dry battery powder particles. The prepared samples were subjected to hardness test using brinel harness testing apparatus. From the experimental results, the sample-III has shown better hardness when compared to the other samples taken for the investigation, indicates that increasing the reinforcement content increases the hardness of the Aluminium Foam.

Full text

The full text of this article is available to subscribers.

On a subscribing campus you are let in by network address, with no login at all.

One-off purchase. Permanent access to this article, no account needed.

A year of online access to every article in International Journal of Chemical Engineering and Processing. Or choose several journals →

How to cite

Francis Xavier L, Ben Rajesh, Ajith C. Ravi, Madan Kumar T.S. Preparation of Aluminium Foam using Recycled Beverage Cans, Na-CL salt and Discarded Dry Battery powder. International Journal of Chemical Engineering and Processing. 2019;4(2):38–42.

Download the citation:

Article details

Preparation of Aluminium Foam using Recycled Beverage Cans, Na-CL salt and Discarded Dry Battery powder

Abstract

Read more of it

Publish your article

Abstract

Related articles

Overview of Influence of Biomass Pretreatment: Hydrolyzed vs Unhydrolyzed on BioH2 Yield

Sonochemical Synthesis of Copper Nanoparticles:Process Fundamentals, Scale-Up Challenges, andIndustrial Opportunities

Evaluation of Coconut Coir Feasibility as Fluid Loss Control Material in Comparison with Commonly Used NUTPLUG

Smart Wastewater Treatment Plant Modeling Using ANN And ASM1 MATLAB Simulation

Evaluation of Kinetic Parameters of Total PetroleumHydrocarbon Degradation Using Grape Leaf as Nutrientto Catalyze the Reaction

Articulating Precarious Waters: A Critical Review of Pharmaceutical Contaminants, Their Pathways, and Ecological–Health Risks in the Aquatic Systems of Bihar, India

Read more of it

Publish your article