Search
106 articles for “UV”
-
UV-Spectroscopic Interaction Studies of Synthesized Graphene Oxide and Methyl Orange
Abstract: Graphene oxide (GO) has become a popular material due to its valuable properties and wide range of applications in various fields. GO was synthesized using a modified Hummers’ method and characterized through various techniques, including X-ray diffraction (XRD), and scanning electron microscopy (SEM), The effectiveness of GO in decolorizing methyl orange was assessed using UV-Vis spectrophotometry, with varying GO concentrations (0.05, 0.075, 0.1, 0.15) g and time (2–120 minutes) intervals. …
Published in International Journal of Environmental Chemistry · Vol. 10, Issue 2, 2024 · pp. 36–47 Read article
-
Heterocyclic Oxadiazole Derivatives Through Various Spectroscopic Techniques as UV, IR.
Abstract: The study focuses on the synthesis, characterization, and analysis of heterocyclic oxadiazole derivatives using various spectroscopic techniques, including UV-visible (UV-Vis) spectroscopy and infrared (IR) spectroscopy. Oxadiazoles are a type of five-membered heterocyclic compounds with nitrogen and oxygen atoms. They are important in medical chemistry and materials research and show a wide range of biological activity. The synthesized oxadiazole derivatives were characterized through UV-Vis spectroscopy to investigate their electronic transitions and …
Published in International Journal of Analytical and Applied Chemistry · Vol. 10, Issue 1, 2024 · pp. 1–8 Read article
-
To Determine the Concentration of Paracetamol Solution by Calibration Curve Method Using UV-Visible Spectrophotometry
Abstract: A new method of spectrophotometric assessment in the UV-region has been developed for the analysis of acetaminophen in tablet form. This method, which uses Methanol and water as diluents, was developed and evaluated for the analysis of paracetamol. In spectrophotometric estimations, this does not reveal any interference. UV-Visible spectrophotometry is one of the most widely used techniques in pharmaceutical analysis. It comprises estimating the amount of UV or visible radiation …
Published in International Journal of Analytical and Applied Chemistry · Vol. 8, Issue 1, 2022 · pp. 45–51 Read article
-
Nano Ultraviolet Finishing of Textiles Using Inorganic UV- Blockers–The Sustainable Approach of Producing Protective Clothing for Better Tomorrow
Abstract: The diminution of the ozone stratum,due to global warming, is likely to intensify existing health effects caused by exposure to ultraviolet (UV) radiations, as stratospheric ozone is a predominantly effective UV radiation absorber. As the ozone layer becomes thinner, the protective filter provided by the atmosphere is gradually abridged. Subsequently, human beings and the environment are exposed to higher UV radiation levels, particularly higher UV-B levels, which have the greatest …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 23–33 Read article
-
Synthesis of Bio-Polymeric Network and Developing UV-Visible Spectrophotometric Method for Heavy Metal Ions Removal from Polluted Water by Apple Residues
Abstract: Biosorption is potentially an attractive technology for removing heavy metals from wastewater and discharging heavy metals into an aquatic ecosystem has become a matter of concern all over the globe since the last century. Pollutants from various industrial operations disturb the aquatic systems and heavy metals present in them cause serious human diseases. Previously established methods, such as chemical precipitation, ion exchange, membrane separation, and adsorption are generally costly due …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 11, Issue 1, 2025 · pp. 1–9 Read article
-
Synthesis of mixed metal oxides CuO-SnO, composite nano material for the study ofefficiency of textile fabrics as UV-absorbers
Abstract: In the present study we report the synthesis and characterization of nanosized copper oxide,tin oxide and composite of copper and tin oxide and their application on cotton fabrics forUV shielding. The CuO-SnO nanocomposite material prepared under different temperature90 0 - 150 °C by using water and 1,2-ethanediol as a solvent. Copper oxide, tin oxide andcomposite of copper and tin oxide nanoparticles were then applied to cotton sample to impartsunscreen activity …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Protein Determination and Soluble Amino Acids Prediction in Various Solvents Extracted Solutions of Indigenous Red Lentil and Moong Pulse through Direct UV- Visible Spectrophotometer Technique: A Comparative Study
Abstract: In this comparative study, direct protein determination have been done for indigenous Red lentil (Lens culinaris) and Moong pulse (Vigna radiata) (obtained from Muzaffarpur, Bihar) by UV-Visible spectroscopy in three different solvents viz. double distilled water (ddH2O), ethyl alcohol (C2H5OH), and methyl alcohol (CH3OH). A few amino acids in solutions have also been predicted (not characterized) based on their peaks observed in UV-region by comparing them with reported range of …
Published in International Journal of Plant Biotechnology · Vol. 9, Issue 2, 2023 · pp. 42–48 Read article
-
Modification of PVA & PMMA with blending and UV Irradiation
Abstract: Abstract-Vinyl polymers have good scope of modification by crosslinking, grafting and other different techniques. UV irradiation is also used for surface modification. In this study PVA and PMMA modified by blending with starch as well as with UV irradiation. Surface crosslinked PVA and PMMA films were set up by applying ultra violet (UV) irradiation. The impacts of convergence of photosensitizer watery arrangement, drenching time and UV light portion on a …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
SYNTHESIS, CHARACTERIZATION AND STUDY OF PHOTOCATALYTIC ACTIVITY OF PVA CAPPED ZINC INDIUM SELENIDE NANOPARTICLES UNDER UV LIGHT IRRADIATION USING METHYL RED DYE
Abstract: In this work, we report the structural morphology, optical properties and photocatalytic activity of polymer capped zinc indium selenide nanoparticles, which have been synthesized by solvothermal method. PVA is acted as capping agent. The PVA capped zinc indium selenide nanoparticles were characterized using XRD, SEM with EDAX, AFM, TEM and UV-Vis absorption spectroscopy. The structural properties of PVA capped zinc indium selenide nanoparticles have been characterized by X-ray diffraction (XRD) …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 1, 2019 · pp. 41–51 Read article
-
Eco Friendly Water Purifier through UV+RO in Rural Areas
Abstract: ABSTRACTA study on the performance of raw water or tap water purifier was conducted between January to May in 2016. The Raw water or tap water was treated through the “advanced biotech techniques” i.e., solar panel TDS meter, UV lamp, RO membrane, TDS controller and UF (Ultra filtration). It was observed that raw water or tap water is more unhygienic which is very harmful for us. RO membrane and UV …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 5, Issue 2, 2019 · pp. 1–9 Read article
-
A Study on Green Synthesis of Nanoparticles of Zinc Oxide using Algae and Plant Extract
Abstract: Green synthesis of metal nanoparticles is increasing trend worldwide. In green synthesis, metal oxide nanoparticles are synthesised through any plant extract or any bacterial, fungal or microalgal source. Synthesis of zinc-oxide nanoparticles have been studied by using algae and other biological extracts. In green synthesis usually use of synthetic chemicals is avoided and naturally abundant compounds like ascorbic acid or citric acid act as reducing agent which reduces metal salts …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 1, 2021 · pp. 23–27 Read article
-
Mechanical properties of Al-Si17Cu3.5Mg0.8 alloy fabricated by stir casting with UV and new CRSS casting process with and without T6 condition
Abstract: Aluminum-Silicon metal matrix composites are the popular materials in the vast majority of the car and modern industries on account of their low weight, high mechanical properties, and incredible wear opposition properties. In the present study, Al-Si17Cu3.5Mg0.8 alloy is fabricated by two casting processes such as stir casting with ultrasonic vibrations (RSC) and merged-rheo-stir-squeeze (CRSS) casting with and without heat treated (T6) condition. Microstructural and material characterization was explored by …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 15–24 Read article
-
Biosynthesis of Silver Nanoparticles using Aqueous Extract of Chaetomorpha media (C.Ag.) Kuetzing
Abstract: Chaetomorpha media (C.Ag.) Kuetzing is common green seaweed belongs to the family Chlorophyceae. The aqueous extract of Chaetomorpha media was used for the biosynthesis of Silver Nanoparticles. The Silver Nanoparticles were formed due to the reduction of silver nitrate to aqueous silver ions in the presence of seaweed extract. Silver nanoparticles exhibited dark brown colour in aqueous solution. The synthesized silver Nanoparticles were characterized by UV-Visible Spectrophotometer, Fourier Transform Infrared …
Published in International journal of Nanobiotechnology · Vol. 6, Issue 2, 2020 · pp. 12–18 Read article
-
Impact of Nanotechnology in Textile Industry: A Review
Abstract: The preface of nanotechnology has revitalized several sectors, including the cloth assiduity. The current state of nanotechnology operation in fabrics is estimated, with a focus on enhancing different textile rates. Because of the unique features of nanoparticles and nanofibers, they may be utilized to produce fabrics with superior mechanical strength, chemical resistance, water repellence, antibacterial capabilities, and a plethora of other parcels that aren't possible with conventional accoutrements. Advancements in …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 2, 2021 · pp. 1–7 Read article
-
Commercial Scale Quantification of Lignin
Abstract: Lignin, an aromatic biopolymer, in the terrestrial lignocellulosic biomass constitutes the single largest and sustainable source of biofuels and biochemicals. The recalcitrant nature of lignin is a hindrance to its chemical or biochemical conversion. Moreover, its insolubility in water too is a major challenge in its quantification which is a necessary step prior to and after its conversion. Though there are celebrated quantification methods like the classical Klason lignin method …
Published in International Journal of Environmental Chemistry · Vol. 11, Issue 2, 2025 · pp. 20–25 Read article
-
Physico-Mechanical Performance of Waste Plant Fiber Reinforced Thermoplastic Composites for Automotive Applications
Abstract: To maximize the interfacial bond strength, it is necessary to investigate the direct relationship between the degree of fiber-matrix adhesion and the mechanical and fracture behavior of composites. In this work, the strength of the interfacial bond between polypropylene (PP) and waste plant fiber (Dharose plant fiber, DF) that have been subjected to ultraviolet radiation (UV) was established. By using hot press molding, unidirectional composites of PP with dharose plant …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 14–24 Read article
-
Synthesis and Characterization of Graphene Nanoplatelets & Graphene Oxide Based Nanofluids With Their Comparative Analysis for Heat Transfer Applications
Abstract: Stability and thermal conductivity are the main features of nanofluids. Higher concentration of nanoparticles become the reason of agglomeration, so a balance equation is required for the preparation of remarkable nanofluids in the application point of view. In the present study, we describe a novel synthesis of graphene Nanoplatelets and graphene oxide based nanofluids with different concentration (0.001,0.003,0.005wt %) with the help of stock solution of 1mg/ml. The Hummer’s method …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 2, 2018 · pp. 13–29 Read article
-
Surface Modification and Performance Evaluation of Biologically Degummed Lady’s Finger Bast Fibers
Abstract: This research aims to investigate the physicomechanical characteristics of biologically degummed lady’s finger bast fiber (LFF) and to walk through the entire process of turning LFF into a commercial cellulosic fiber that can be used globally in a variety of textile applications, including carpets, oil and liquid absorption, packaging, basic textile products, coarse ornamental textile products, geo-textiles, and reinforcements in polymer matrix composites. This article describes the application of different …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 21–34 Read article
-
Advanced Recent Synthesis and characterization of SnO2 NPs using Aristolochia bracteolata leaf Extract and multy Application
Abstract: The SnO2 nanoparticle was synthesised by sol-gel method and sonication technique. SnO2 nanoparticle using Aristolochia bracteolata leaf Extract. Aristolochia bracteolata is a shrup distributed in India, this family Aristolochiaceae, it is used in the medicine. The nanoparticle was characterized by HR-SEM with (EDX), (HR-TEM), XRD analysis, photoluminescence spectroscopy (PL) and UV-Vis DRS. This nanopartricles was photodegradation of Rhodamine B dye under the UV-light irradiation at 365 nm. The hydroxyl radical …
Published in International Journal of Green Chemistry · Vol. 4, Issue 2, 2018 · pp. 25–36 Read article
-
To study the Properties of Bio Synthesized Silver Nanoparticles
Abstract: Recently colloids silver nanoparticles have attained much attention in global nanotechnology market due to valuable application for catalytic, biomedical, electronics and widely as Antimicrobial agents. In the present work author have synthesized and characterized the Colloids silver nanoparticles with three biosynthesis methods and the detail characterization of particle has been done by UV–Visible spectroscopy, AFM, FTIR, and with DLS techniques. Particles formation was conformed from UV spectra of nanoparticles. Size …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 1, 2018 · pp. 34–40 Read article