Search
187 articles for “Impact test”
-
A Study on Evaluation of Mechanical Properties of Reinforced Composite Developed Using Corn Husk and Glass Fibre
Abstract: With the increasing demand for the disposal of polymer wastes and environmental waste from agriculture/ farming, this research aims to develop composite materials by using glass fibre and corn husk fibres by hand lay-up technique. The fibre from the maize husk was extracted and then overlapped on glass fibre cloth films in regular or irregular orientations. The reinforcement is done with the epoxy resin. The reinforcement and harden matrix are …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 32–36 Read article
-
Mechanical Behavior of Glass Fiber Reinforced Polyester Composites Modified with Silane Treated Alumina Nanofibers Subjected to Low-Velocity Impact
Abstract: The rise in demand and interest in lightweight offshore structures for marine, defense, automotive, and aerospace applications require nanoparticle enhancement of fiber-reinforced composite materials. When exposed to low-velocity Impact during service, these materials experience drastic changes and degradation in their macro-and microstructures. Therefore, it is critical to have a detailed comprehension of these materials' mechanical behavior and failure mechanisms. Within the scope of the current study, low-velocity impact behavior of …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 55–73 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
Development of Epoxy Based Hybrid Composite Reinforced with Jute and Glass-fiber and Effect of Silicon Carbide additive on it’s Mechanical Properties
Abstract: In this project, an effort is made to compare the improvement of the matrix material properties because of the presence of the fillers and additives. Initially, hand lay-up process was carried out in a mold of known dimensions to layup jute fibers of varying weight percentages in the epoxy matrix. Another composite with glass fibers of similar weight percentages to that of jute were laid up in epoxy matrix in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 8–12 Read article
-
Analysis of Mechanical and Corrosion Properties of AISI50110 (EN31) Steel With and Without Heat Treatment
Abstract: The mechanical properties of steel decide its applicability for a particular condition. Heat treatment processes are commonly used to enhance the required properties of steel. The material was machined to ASTM standards and then different tests like microstructure analysis, hardness test, impact test, etc. were carried out after the heat treatment processes. All the tests were carried out in the mechanical workshops and laboratories under the supervision of their respective …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 24–41 Read article
-
Mechanical Characterization using Finite Element Analysis of Jute and E-Glass Fabric Reinforced Epoxy Composite Materials
Abstract: Recently, there has been a greater inclination towards natural fiber reinforced plastics composites (NFRPC) because these are environmentally friendly and cost-effective to synthetic fiber reinforced composites. The availability of natural fibers and ease of manufacturing have tempted researchers worldwide to try locally available inexpensive fibers and to study their feasibility of reinforcement purposes and to what extent they satisfy the required specifications of good reinforced polymer composite for tribological applications. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 2, 2020 · pp. 21–39 Read article
-
Impact, Flexural, and Hardness Properties of AISI 1018 Mild Steel Butt Joint Welded using Gas Metal Arc Welding (GMAW) under Various Welding Parameters
Abstract: AbstractThe effects of welding parameters such as welding current, voltage, and travel speed on the impact, flexural, and hardness properties of AISI 1018 mild steel using Gas Metal Arc Welding (GMAW) were investigated. In this research, specimen sizes of 500 mm x 10 mm x 10 mm and 5.5 mm x 10 mm x 10 mm were fabricated according to ASTM standards. In addition, a v-groove had been prepared at …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 6–13 Read article
-
CAE Analysis and Material Selection for Chassis of 4-Wheel Efficycle
Abstract: ABSTRACT This paper presents a comprehensive Computer-Aided Engineering (CAE) analysis and material selection study for the chassis of a four-wheel Efficycle — a hybrid human-electric powered vehicle designed for student competitions and sustainable mobility applications. The objective of the study is to evaluate the structural integrity, stiffness, and crashworthiness of the chassis under various loading scenarios including front impact, side impact, rollover, and torsional loads. Using CAD models developed in …
Published in International Journal of Computer Aided Manufacturing · Vol. 11, Issue 2, 2025 · pp. 9–18 Read article
-
CAE Analysis and Material Selection for Chassis of 4-Wheel Efficycle
Abstract: ABSTRACT This paper presents a comprehensive Computer-Aided Engineering (CAE) analysis and material selection study for the chassis of a four-wheel Efficycle — a hybrid human-electric powered vehicle designed for student competitions and sustainable mobility applications. The objective of the study is to evaluate the structural integrity, stiffness, and crashworthiness of the chassis under various loading scenarios including front impact, side impact, rollover, and torsional loads. Using CAD models developed in …
Published in International Journal of Computer Aided Manufacturing · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Characterization of the Impact Strength in Cryogenic Treatment of TIG Welded Nickel-based Superalloy
Abstract: The TIG welding of the IN617 heat and oxidation resistant has been precisely controlled through welding parameters, while γ'-Ni3(Al, Ti) phases predominantly controlled solution strengthening, and precipitation strengthening and carbides in γ matrix, as well as γ' precipitate’s shearing mechanism is prominent to enhance strength of superalloys. The high hardness has been preserved owing to strengthening major elements such as Cr, Co, and Mo etc., and the well coherency maintain …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 1–12 Read article
-
Graphene and Carbon Nanotube-PLA Composite Feedstock Filament for Fused Deposition Modelling:Review
Abstract: 3D printing or AM has revolutionized the way of manufacturing by designing complex structure in atomized features which cannot be realized by conventional processing method. Many are adopting Additive Manufacturing over traditional method to manufacture sophisticate products from single or composite material. 3D printing has a demerit that the mechanical properties of product suffer. To address this problem, this study is conducted for development of improved and sustainable feedback material …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 22–26 Read article
-
A study to evaluate the effectiveness of video teaching programme on kegel exercises among postnatal mothers in selected hospital at Jammu.”
Abstract: The purpose of this research is to determine the impact of VTP (video teaching programme) on kegel exercises among postnatal mothers in a Jammu hospital. To accomplish the study's aims, the research design was quasi-experimental. Forty postnatal mothers were chosen to test the impact of VTP on kegel exercises at different hospitals in Jammu.The sampling technique for study was Convenience sampling technique to select the samples. Informed consent was obtained …
Published in International Journal of Obstetrics, Perinatal and Neonatal Nursing · Vol. 8, Issue 2, 2022 · pp. 1–7 Read article
-
FABRICATION AND EVALUATION OF VINYL ESTER RESIN BASED HYBRID COMPOSITES
Abstract: Jute is most widely used natural fiber in combination of various polymer because of easy availability, low environment impact, low density, low production cost, satisfactory mechanical properties and usage in wide range of applications. Mechanical properties of fibers are depending upon various factors such as fiber length, fiber orientation, fiber contact etc. In the present study, composite of Jute (J) and Glass fiber (G) have been fabricated using hand lay …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 26–31 Read article
-
Simulation of Syngas Production from Rice Straw Gasification over Zeolite Catalyst using Aspen Plus
Abstract: A comprehensive process model is developed to simulate syngas production from Rice strawGasification over zeolite catalyst using an Aspen Plus simulator. The model is based on Niko andMahinpey model and some modifications were made in the gasification reaction model. Two caseswere stimulated which are catalytic gasification and non-catalytic gasification to test the impact ofzeolite catalyst on the reaction. Comparisons were based on the basis of flowrate, energyconsumption and effect of …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 7, Issue 2, 2021 · pp. 11–17 Read article
-
An Analysis of Ujjani Reservoir in Solapur, Maharashtra, India, Using Mathematical Modeling and Satellite Remote Sensing Techniques for Sedimentation Studies
Abstract: The reservoir's storage capacity steadily decreases due to sedimentation. The reservoir life can be preserved by monitoring sedimentation and implementing appropriate management measures. The Ujjani dam was built for power generating, irrigation, and water delivery systems. It is located in the drought-prone Solapur district, due to which Ujjani is an important initiative for the region's economy and society. In the present study, the Ujjani reservoir's sedimentation is evaluated for monitoring …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Weldability of Ferrous Metals
Abstract: The weldability of various steels and cast iron were reviewed. Weldability of steel/cast iron refers to the maximum hardness of the HAZ and cold cracking susceptibility of welds. Many researches on weldability of ferrous metals were discussed; research on weldability of high carbon steel and white cast iron are limited. Most researchers inclined to hardness and tensile test of weldment of ferrous metals; researches on creep, fatigue, damping capacity, impact …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 2, 2020 · pp. 14–21 Read article
-
An evaluation of the impact of a structured teaching program on nursing officers' knowledge of stem cell therapy for neurological disorders at a selected hospital in Bangalore
Abstract: Background of the study: A stem cell is an undifferentiated cell in a multicellular organism that can proliferate indefinitely to produce more cells of the same type and can differentiate into various other types of cells. So, stem cell therapy is also called as regenerative medicine, it promotes the repair response of diseased and dysfunctional or injured tissue it has an ability to cure the neurological disorders Hence, the present …
Published in International Journal of Neurological Nursing · Vol. 11, Issue 1, 2025 · pp. 50–57 Read article
-
Influence of Compaction Technique on Shear Strength of Modified Subgrade Soil
Abstract: The subgrade soil is considered as the foundation for the roadway structure, it is responsible to provide the required stability for the overlaying pavement layers and to limit the deformation due to traffic load repetitions by furnishing homogeneous stress distribution. For poor soil condition, grid reinforcement or Asphalt stabilization techniques are usually implemented to control the deformation and improve shear strength of poor granular subgrade soil. In this work, the …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 1, 2018 · pp. 17–25 Read article
-
Effectiveness of Structured Teaching Program on Knowledge Regarding Effect of Junk Food on Mucosal Layer of GI Tract Among Nursing Students in Selected Nursing Colleges at Bengaluru
Abstract: Background: Junk food is high in calories, sodium, and fat. Numerous health issues might be attributed to eating junk food in excess. Teenagers who consume junk food may be unable to eat a balanced meal at home or at school. Teenagers all throughout the world now frequently eat meals like Maggi noodles, burgers, pao-bhaji, sandwiches, hot dogs, patties, pastries, pop-corn, potato chips, carbonated beverages, biscuits, muffins, toast, kulcha-channa, samosa, and …
Published in International Journal of Medical Surgical Nursing · Vol. 5, Issue 2, 2022 · pp. 27–38 Read article
-
A Study to Evaluate the Effectiveness of Educational Handout on Knowledge Regarding Computer Vision Syndrome among Primary School Children in a Selected Urban School, Bagalkote
Abstract: Computers play a valuable role in increasing the efficiency and accuracy of several works. However, prolonged computer use carries a number of hazards, including eye conditions. The situation applies to children as well. Kids have a tendency to adopt the things they observe. Kids are equally interested in TV and computers as a result. Consequently, computer vision syndrome currently affects both adults and children equally. The study's main objective was …
Published in International Journal of Cardiovascular Nursing · Vol. 9, Issue 1, 2023 · pp. 22–28 Read article