Search
314 articles for “Reinforcement”
-
Mechanical characterization of Fiber glass Composites with Nano silica
Abstract: Epoxy-based fiber glass composites with enhanced strength by silica Nano particles checked for mechanical strength by addition of nanoparticles. Fiber glass Composites were prepared with glass fiber and nanoparticles containing resin, by infusion method. proper mixing of nanoparticles in resin was checked by various techniques. Viscosity of liquid resin reduced because of nanoparticles but still have good command to reinforce glass fibers. glass transition temperature (Tg) of polymer containing silica …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 49–58 Read article
-
Effects of Compatibilizer and Paper Sludge Content on the Performances of Thermoplastic Polymer Composites
Abstract: One of the environmental issues affecting third-world countries is the economic use of lignocellulose waste, which is now being researched. Paper sludge (PS) composites will allow for the effective use of a waste material that is currently burned or buried, as well as the ability to lower the cost of the composite that is created. In this study, the mechanical and thermalcharacteristics of environmentally friendly composites constructed from PS-reinforced recycled …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 10–21 Read article
-
Usage of fly ash and slag as supplementary cementitious materials in engineered cementitious composites (ECCs) – A Review
Abstract: Researchers evolved Engineered Cementitious Composite (ECC) in the Nineties, belong to the family of high-performance fibre-reinforced cementitious composites. ECC, additionally known as bendable concrete as a ductile alternative to conventional concrete. ECC requires a huge amount ofsupplementary cementitious material (fly ash), contributing to sustainable development. In this paper, a review of ECC studied with supplementary cementitious materialswhich includefly ash and slag. ECC has better tensile strength, ductility and durability properties …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 44–55 Read article
-
Strength of Soil below RC Frame Subjected to Seismic Forces
Abstract: Present study focusses on the dynamic behavior of Soil below reinforced concrete frames considering soil structure interaction by performing linear static and dynamic analysis. A reinforced concrete frame having G+10 storey was considered. The investigation on the behavior of RC frame is carried out by using dynamic analysis i.e., Response Spectrum method. The modeling of RC frame is carried out by using finite element-based computer program i.e., STAAD.Pro. The investigation …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 2, 2021 · pp. 35–42 Read article
-
Evaluation of RC Frames in Shifting on Seismic Zone 3 to 5 and Retrofitting Techniques using ETABS
Abstract: The finite element analysis has been carried out on six storey reinforced concrete frames using commercial finite element software ETABS. The performance of six storeys infilled frame failing due to improper design as well as inadequate reinforcements when seismic zone shifting from zone 3 to 5 was studied. The behavior of infilled frame considered in zone 5 was studied and compared with the results obtained from the analysis of frame …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 2, 2017 · pp. 1–16 Read article
-
Study on Torsional Behaviour of RC Flanged Beams Strengthened with Glass FRP
Abstract: Existing structures needs repair and rehabilitation due to Environmental deterioration, increased service loads, reduced capacity due to aging, deterioration owing to poor construction materials and workmanships and conditional need for seismic agitating. FRP has been used successfully in a large number of such uses for causes like low weight, high strength and durability. Many previous research works on torsional strengthening were focused on solid rectangular RC beams with different strip …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 1, 2018 · pp. 15–21 Read article
-
Behavior of RC Frame considering Soil Structure Interaction Under Seismic Load
Abstract: Present study focus on the behavior of reinforced concrete frames considering soil structure interaction by performing linear static and dynamic analysis. A reinforced concrete frame having G+10 storey was considered. The investigation on the behavior of RC frame is carried out by using dynamic analysis i.e., Response Spectrum method. The modeling of RC frame is carried out by using finite element-based computer program i.e., STAAD.Pro. The investigation is carryout by …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 2, 2021 · pp. 1–9 Read article
-
Efficient Energy Conservation from Transport Vehicle to Utility Load
Abstract: This report portrays another strategy to produce power from a vehicle and sunlight based chargers to use for a utility burden. The remainder with which we are left in the division of traditional wellsprings of energy isn't so sumptuous for one to have a good time on this advanced planet. Thus, it's the excellent obligation of each and every individual specialist to clear an elective way for inventive age of …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 8, Issue 1, 2022 Read article
-
Study of Isotropic Property
Abstract: This article is constitutive from as forged as well compounded form. Isotropy is uniformity in various orientations. Isotropy is composed of Greek isos meant by equal and tropos meant by way. Precise definable consequence is subjective to depend on material property i.e., same when tested in different directions. A common example of isotropy is inclusive as of glass, plastics, and metals. Alter subject area is studied as inequality, given by …
Published in International Journal of Energetic Materials · Vol. 7, Issue 2, 2021 · pp. 1–7 Read article
-
INVESTIGATIONAL STUDIES ON MECHANICAL PROPERTIES FOR FRPS COMPOSITES
Abstract: The fibre reinforced composite materials consists of fibres of significant stiffness and strength embedded in a matrix with distinct boundaries between them and these materials had better mechanical properties when compared to normal metals which are thought as better substitutes to metals and add strength and reduces weight of a given system.The strength of FRPSS varies basing on its constituents and composition of constituents. In marine field where high strength …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 1–6 Read article
-
Effect of Abrasive Water Jet Machining Parameters—An Experimental Investigation
Abstract: Machining studies on the fiber reinforced polymer composites is vital requirement for the composites application in different fields. Particularly advanced machining techniques like abrasive water jet machining can be machined with higher accuracy and distortion free composites. In this work aims to study the abrasive machining parameters on the basalt fiber polymer composites. The woven basalt fiber reinforced polymer composites were prepared using hand layup techniques. The machining effect of …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 21–23 Read article
-
Nanocomposites: The Fusion of Nanotechnology and Composite Materials
Abstract: Nanocomposites, resulting from the integration of nanotechnology and composite materials, have emerged as a cutting-edge class of materials with exceptional properties and multifunctional capabilities. This article presents a concise overview of the principles, fabrication methods, and diverseapplications of nanocomposites, highlighting their profound impact on numerous industries. By harnessing the power of nanotechnology, nanocomposites offer precise control over material structure and properties at the nanoscale. Through the incorporation of nanoscale reinforcements, …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 43–50 Read article
-
Assessment of Tensile and Hardness Property of AA5083/Nano-Al2O3 Metal Matrix Composites
Abstract: Al–Mg base composites reinforced with different mixtures of nano-Al2O3 particles have been fabricated by mechanical stir casting and their metallurgical and mechanical characterization has been investigated. In this investigation, the Al2O3 particulates were reinforced into the base matrix of aluminium fabricated with five levels of volume fraction such as Al/0 vol.% Al2O3, Al/2 vol.% Al2O3, Al/4 vol.% Al2O3, Al/6 vol.% Al2O3 and Al/8 vol.% Al2O3. After the Al-base-nano-composites were fabricated …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 28–34 Read article
-
Mechanical characterization of hybrid natural fibre composites developed through compression moulding process
Abstract: Increasing environmental concerns these days due to excessive consumption of fossil-fuel products have impacted our atmosphere, which has led several researchers to work in the field of polymer composites reinforced by natural fibres. In this research, the emphasis is on developing the completely biodegradable green composites using polylactic acid (PLA) as a matrix and reinforcement with jute and sisal fiber by compression molding method and effect of various parameters on …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 29–35 Read article
-
Mechanical and Barrier Properties of LLDPE-LDPE Blend Film with Micro Clay
Abstract: The present study LLDPE-LDPE(50-50 wt%) were compounded with added microclay filler using silicone oil as dispersing agent by twin screw compounding. The three formulations were taken as 1%, 3%, 5% of microclay. The extruded standard has been cut into pellets by cutter. Then films were made using blown film extrusion and then tested. As the filler content increases, the flow behaviour of the film increases. Tensile strength increases upto 1% …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 38–46 Read article
-
Effects of Coupling Agent and Nanoclay on the Mechanical, Morphological and Dimensional Stability of Natural Fiber/Polypropylene Composites
Abstract: Polymer nanocomposite is made up of polymer as a matrix ingredient and reinforcement ingredient as a filler in the form of nanometer particles. These ingredients have dissimilar physical and chemical features and are mixed to generate sole features of nanocomposites. Polypropylene (PP) was nominated as the polymer matrix ingredient. Reinforcement ingredients used include organically modified montmorillonite with natural fiber. Various composites based on polypropylene, natural fiber, and organically modified montmorillonite …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 9–18 Read article
-
The Potential Application of Walnut Shells as Biofillers for Natural Rubber Composites
Abstract: It was evaluated whether walnut shells should be used as filler in composites made of natural rubber. Samples of walnut shells were ground to fine powders, sieved through a 75 μm mesh, and were used in compounding natural rubber using varying filler loading of unfilled, 20 hpr, 30 hpr, 40 hpr, and 50 hpr. The physicochemical analysis results of the walnut shell powder were 5.30, 10.10%, 2.50%, 43.70%, 49.70 mg/g, …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 30–34 Read article
-
Microstructural and Mechanical Behavior of Al6082/SiC/Gr Hybrid Composites
Abstract: The aim involved in designing metal matrix composite materials is to combine the desirable attributes of metals and ceramics. The present work is focused on the study of behavior of aluminum alloy (Al6082) with SiC and graphite (Gr) composites produced by the stir-casting technique. The reinforcement percentage is varied from 5% to 15% in a step of three. Microstructure test, tensile test, and hardness tests are performed on the samples …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 28–40 Read article
-
Graphene and Carbon Nanotube-PLA Composite Feedstock Filament for Fused Deposition Modelling:Review
Abstract: 3D printing or AM has revolutionized the way of manufacturing by designing complex structure in atomized features which cannot be realized by conventional processing method. Many are adopting Additive Manufacturing over traditional method to manufacture sophisticate products from single or composite material. 3D printing has a demerit that the mechanical properties of product suffer. To address this problem, this study is conducted for development of improved and sustainable feedback material …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 22–26 Read article
-
Study To Develop Skill In Urinary Catheter Care Among Caregivers Of Neurologically Debilitated Patients
Abstract: The study was aimed to develop skill in urinary catheter care among caregivers of neurologically debilitated patients. Pre-experimental (post-test only design) design was used on 30 caregivers of neurologically debilitated patients in Neuro wards of DMC & Hospital, Ludhiana, who were selected by using purposive sampling technique. Demonstration of urinary catheter care was given to the caregivers and reinforcement of urinary catheter care was done after each return demonstration to …
Published in International Journal of Neurological Nursing · Vol. 7, Issue 1, 2021 · pp. 46–52 Read article