Search
472 articles for “Production Process”
-
Third Generation Biofuel as Alternative Fuel for Compression Ignition Engine
Abstract: In recent years, many researchers have tested compression ignition engines with the goal of creating a diesel fuel alternative. This was also published in literature. The limited supply and increased cost of petroleum products are two main reasons for the search for alternate feedstocks for biodiesel. This paper reviews the potential of alternative biodiesel feedstocks to replace petroleum diesel, specifically focusing on algae biodiesel and the process for producing biodiesel. …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 12, Issue 1, 2026 · pp. 10–15 Read article
-
Experimental Investigation of Process Parameters on Machining Force, MRR and Power in Turning of AISI 316 Steel
Abstract: A machining process involves many process parameters which directly or indirectly influence the surface quality of the product. A precise knowledge of these optimum parameters facilitate reduce the machining costs and improve product quality. Current investigation aims to investigate the effect of process parameters; cutting speed, feed and depth of cut in turning of SS-316 which is widely used in automobile industries, each varying in three levels. The response characteristics …
Published in International Journal of Computer Aided Manufacturing · Vol. 5, Issue 1, 2019 · pp. 18–25 Read article
-
Adaptive Production Scheduling in Multi-Machine Manufacturing Environments
Abstract: For manufacturing processes to meet evolving market demands, they must be executed in the most efficient manner while maintaining flexibility against unanticipated disruptions. Often, traditional scheduling methods overlook dynamic variability and real-time interruptions. An inverse scheduling framework for a multi-machine flowshop system is proposed in this research with the primary objective of makespan minimisation. Several issue situations are analysed to validate the algorithmic efficacy, and metaheuristic techniques are used to …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 1, 2026 · pp. 32–42 Read article
-
Production of Paint Using Locally Sourced Materials
Abstract: In this research work, a prototype mixer was fabricated particularly for the purpose of this research in which paint production was carried out. For the processing, two formulations were used with the same composition but differs in extender pigment. Calcium carbonate was considered and used as an extender pigment which gives white coloured paint with titanium oxide as prime pigment. This was due to the colour of the periwinkle shell …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 35–40 Read article
-
Manufacturing of Reinforced Composite Fly Ash Bricks – Product Analysing and Development Using Value Engineering Techniques
Abstract: The key driver of Indian economy is structured by the infrastructure development. This sector is principally responsible for thrusting India’s overall development and an intensive focus from government for initiating policies that would propose alternate methods and materials for which the end products ensuring high quality, non-degradable, time-bound creation of world class infrastructure in the country. Infrastructure sector includes power, bridges, dams, roads, and urban infrastructure development, which requires huge …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 1, 2018 · pp. 12–19 Read article
-
A Review Study on the Development of a City into a Smart City
Abstract: Today’s industrial environments are moving toward automation. This results in improving item quality, accuracy, productivity and to diminish item cost. Error identification of products is an exceptionally troublesome modern process. Persistent manual detection generates consistency issues. The purpose of this project was to design and fabricate a working prototype for an automatic error detector machine. It demonstrates the idea of an ordinary conveyor belt, but with some intelligence. This main …
Published in International Journal of Town Planning and Management · Vol. 4, Issue 1, 2018 · pp. 35–41 Read article
-
Artificial Intelligence Applications in Mechanical Engineering: A Pathway to Industry 4.0
Abstract: Abstract— The emergence of Industry 4.0 signifies a groundbreaking change in the industrial landscape, propelled by the integration of cyber-physical systems, the Internet of Things (IoT), and artificial intelligence (AI). This period represents the convergence of digital technologies with conventional manufacturing practices, resulting in the development of intelligent, interconnected, and autonomous production settings. For mechanical engineering—traditionally focused on physical systems, manual design, and empirical approaches—this shift has brought about an …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 2, 2025 · pp. 1–6 Read article
-
Artificial Intelligence for the Art and Science of Separation: Optimizing Chemical Systems
Abstract: Chemical separation processes play a critical role across chemical manufacturing, energy production, pharmaceuticals, and environmental remediation, yet they remain among the most energy-intensive operations in modern industry. Recent advancements in artificial intelligence (AI) offer transformative opportunities to significantly improve the efficiency, selectivity, and sustainability of these systems by leveraging computational power and data-driven insight. This article reviews the emerging integration of machine learning, data-driven modeling, and advanced optimization algorithms with …
Published in International Journal of Chemical Separation Technology · Vol. 11, Issue 2, 2025 · pp. 1–7 Read article
-
Increasing an overall equipment effectiveness visibility and analyzing in a manufacturing industry
Abstract: The exploration for improving productivity in the current global competitive environment has created a need for rigorously defined performance measurement system in a manufacturing process. OEE, a vital KPI of TPM is used to evaluate performance and productivity of the machine. OEE is one of the performance evaluation methods that are most common and popular in the production industries. This paper tries to evaluate the OEE of machines in a …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 2, 2016 · pp. 89–103 Read article
-
Comparative Analysis of In-vessel Composter Using Microbial Consortium
Abstract: Degradation of biodegradable waste with the help of microbial consortium and In-vessel composter has occurred to be effective way for composting and it provide with a better end product for further use. This paper represents a review of literature available on research of decomposition of biodegradable waste with in-vessel composter and microbial consortium, indicating the various key factors that are important in the composting process and the results of the …
Published in International Journal of Landscape Planning and Architecture · Vol. 7, Issue 1, 2021 · pp. 1–10 Read article
-
Optimization Strategies Towards Enhanced Production of Microbial Surfactants for Diverse Industrial Applications: A Futuristic Approach
Abstract: Chemical or synthetic surfactants being employed in numerous industries pose significant environmental hazards due to their persistence in the environment and potential toxicity to aquatic life. Biosurfactants are low-molecular-weight surface-active compounds that offer a promising alternative to surfactants owing to their less toxicity, biodegradability and biocompatibility nature. They are derived from a variety of natural sources, including bacteria, fungi, and plants. In recent years, there has been a surge in …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 10, Issue 1, 2024 · pp. 11–22 Read article
-
Impact of Silica Fume on High-Strength Concrete
Abstract: For many decades, concrete has been the primary material used in construction because of itsreliability under normal conditions. However, certain applications necessitate concrete withexceptionally high compressive strength and durability, particularly in aggressive environments.Consequently, achieving compressive strengths in the range of 60–140 MPa is critical for thesedemanding situations. Silica fume, a by-product of silicon and ferrosilicon smelting processes, hasgained recognition as an effective cementitious material for enhancing concrete properties. Thisdissertation investigates …
Published in International Journal of Concrete Technology · Vol. 10, Issue 1, 2024 · pp. 25–31 Read article
-
The Need for An Ecosystemic Approach in Animal Biotechnological Settings: A Phenomenological Study
Abstract: Local and global demand for meat and dairy has been expected to increase and so do farming and research facilities which perform at high throughputs to meet such high demand of nowadays populations. However, both processes pose a challenge in maintaining production and animal wellbeing during husbandry. A phenomenological study was carried out at a research laboratory specialized in farm animal biotechnology which was compared with published records of similar …
Published in International Journal of Animal Biotechnology and Applications · Vol. 5, Issue 1-2, 2019 · pp. 20–24 Read article
-
Studies on sources of lithium
Abstract: AbstractLi is abundant in nature amounting 20 mg/kg of the earth crust. Li widely used in Li ion batteries (LIBs), powerLIBs, chemicals, ceramics, glasses, rubber, reactors, pharmacy, space sectors and alloyed to Al. Sources of Li are natural deposit of minerals, salt crust, brine, salt lakes and ocean basin accumulations. Economical route of extractions are hydrometallurgy and pyrometallurgy. Sorption of selective element by inorganic ion exchange applied for poor containment …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 2, 2020 · pp. 12–17 Read article
-
Fresh and Hardened Properties of High Performance Concrete with Weld Slag as Fine Aggregate
Abstract: This research centers on the incorporation of welding slag, the residue remaining after the welding process, as fine aggregates in the production of high-performance concrete with a compressive strength of 70 MPa. The chemical and physical characteristics of welding slag aggregates (WSA), such as chemical compositions, specific gravity, SEM images, XRD, and EDS analysis, were investigated. Additional investigations were carried out by substituting welding slag with standard sand at varying …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 29–36 Read article
-
Experimental Study on Partially Replacement of Fine Aggregate & Coarse aggregate by Waste Marble with addition of S-Fiber
Abstract: Today’s world is a concrete jungle. With the ever increasing population of the world, in general and the developing countries there is the tremendous pressure on the Civil Engineer to develop a cost effective as well as ecofriendly structure to fulfill the need of the human being. Concrete is a heterogeneous mixture of binding material (cement or lime), coarse aggregates, fine aggregates (sand) and water. Fine and coarse aggregates are …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 1–9 Read article
-
Comparative Study on Reinforced Cement Concrete Structures and Concrewall Structures
Abstract: Developing countries especially those in India, are facing the challenge of a growing middle class with greater demand for housing facilities. Faster and more affordable methods of construction are being sought after it, more than ever before as the action of emergency response. Increased innovation aimed at reducing the cost of construction, and creating affordable housing, is being integrated into methods of building and construction. This has led to introduction …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 8–11 Read article
-
Glycerol Management: Challenges and Opportunities for Biodiesel Producers and Refiners
Abstract: During the last few years, concerns with availability and cost of conventional liquid fuels increased considerably. Considering the present scenario, bio-components are playing an important role in transportation fuels. One such bio-based fuel that is being widely commercialized is biodiesel. With the commercial production of biodiesel a glut of glycerol is going to be created as a byproduct; it will cause market prices to plummet which imbalance the economic viability …
Published in International Journal of Green Chemistry · Vol. 1, Issue 1, 2015 · pp. 1–14 Read article
-
Production of Dental Materials by Computer-Aided Manufacturing Technologies
Abstract: The aim of the present paper is to make a review of the modern trends in the development of the technologies for production of dental materials. An understanding of the currently available bonding strategies to CA/CAM materials can help the clinician to select the most indicated system for each category of materials. Three are the main trends in production technologies in dentistry last 30 years: digitalization, simulation and implementation of …
Published in International Journal of Computer Aided Manufacturing · Vol. 3, Issue 1, 2017 · pp. 36–39 Read article
-
Material and Energy Balances in the Process of Anti-Bacterial Drugs from Erythromycin
Abstract: Erythromycin is a crucial material for production of active pharmaceutical ingredient with several different applications to treat diseases. Demand for erythromycin derivatives has been accumulated within the last twenty years and drastically in last 2 years as a key raw material for COVID-19. Clarithromycin is one amongst the derivatives of erythromycin that has higher anti-bacterial properties. This paper involves manufacture of Clarithromycin, an anti-bacterial drug, from Erythromycin. Selective methylation of …
Published in International Journal of Chemical Engineering and Processing · Vol. 7, Issue 2, 2021 · pp. 21–36 Read article