Search
1475 articles for “Performance”
-
Thermal Analysis of I.C. Engine Poppet Valve Using FEM: A Review
Abstract: Abstract: Inlet and outlet valves in I.C. Engines are referred to as poppet valves. These valves are operated by the valve mechanism. When these valves are uncovered to the heat thermal stresses are evolved in order that thermal evaluation is very important to predicting and stopping failures in valves. The foremost position of the valve train is to ensure the gases change manner for all the engine speeds. The valve …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 1, 2018 · pp. 30–37 Read article
-
Failure Prediction of Composite Lamina
Abstract: Composite materials are preferable in many applications of engineering than their metallic equivalent. These materials provide desirable characteristics and required properties for specific design and testing. In orthotropic fiber composites, the fiber orientation dictates the material properties, because the properties can be built into the laminate during fabrication. In this study, a composite laminate is tested with a specific configuration whether it would fail or survive under specific load. If …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 27–36 Read article
-
Studies of meta-materials
Abstract: AbstractMeta-materials are artificial composites designed to operate electromagnetic property. Properties of wave nature manipulation have originated fashioned fabrication. This has to perform as rigorous as subjected under adoption specific optical or microwave or acoustic provision. Fabrication has precision formof shape, geometry, size, orientation and arrangement of materials.Applicationof meta-materialsincludes super resolution imaging and optical as well acoustic sensing. Decay, separate and couple among as split transverse electric and magnetic to that …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 47–52 Read article
-
Compatibilizing Effect of Modified Polypropylene on the Properties of Polypropylene/Organically Modified Layered Silicate Nanocomposites
Abstract: In the present research paper, a series of polypropylene (PP) nanocomposites containing 3, 5, and 7 wt% of an organically modified layered silicate (OM) were prepared via direct melt mixing in the presence of maleic anhydride grafted polypropylene (indicated as PP-g-MA, PPMA), and hexamethylenediamine-modified maleic anhydride grafted polypropylene (marked as PP-g-HMDA, PPHMDA) as compatibilizing agent at concentration of 10 wt%. Subsequently the influences of the compatibilizer on the morphological, mechanical, …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 8–19 Read article
-
Developments of Photonic Ferroelectric Ceramic Compose
Abstract: This article is a study of imposed interposed crystal allotropic modification underexposure of electricity. Ferroelectric photonic ceramic powder and films are usual studied in preparation from adoptive transduction in the same crystal based on electrical gradient. Ferroelectric ceramics and thin films used to be processed by the sol-gel method, where empirical variables of interest have been their chemical composition, constituent phases, and microstructure. Functional attributes made metal oxide compose like …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 37–44 Read article
-
Finite Element Analysis of Composite Pressure Vessel with Non-Geodesic Fiber Trajectory In view of Friction Factors on Cylinder and End Domes
Abstract: Composites are materials created by dissimilar materials with a view to improve the properties or to create materials with desired properties. Progressive Fiber Polymer Composites have developed as an essential class of industrial materials for load carrying applications with well-rounded properties for many industrial and social applications. Structures like pressure vessels, pipes and motor casings made-up of Filament Winding technology are widely used in aerospace applications. Conventionally, pressure vessels were …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 9–21 Read article
-
Recent Progress of Post-reactor and Reactor-made Polypropylene-based Thermoplastic Elastomers
Abstract: The global market for thermoplastic elastomer (TPE) is growing rapidly owing to the rising demand from the packaging, automotive, healthcare, construction, electrical, electronics and other sectors. Significant progress has been made in the last few decades in the development of different TPE. Polypropylene being low-cost, corrosion resistance, better mechanical properties and readilyavailable, has attracted several researchers to develop polypropylene based thermoplastic elastomers (PP-TPE). This review focuses on recent advancements in …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 1–18 Read article
-
Sorption of Pb (II), Cd(II) and Zn(II) by synthesized nanocrystalline sodium potassium flurophlogopite (FGP)
Abstract: We have successfully synthesized nanocrystalline sodium potassium fluorophlogopite (FGP) crystals with controlled sizes from ≈ 25 nm to 100nm, using an organic tetrapropylammonium (TPA) hydroxide. We have been successfully synthesized material depends on the source of silicate and hydrothermal crystallization conditions. The synthesized materials were characterized by using different techniques such as X-ray diffraction, Energy Dispersive Analysis, Scanning Electron Microscope, Transmission Electron Microscopy and FTIR analysis. The use of sodium …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 41–49 Read article
-
Review on the Hot Embossing Technology to Fabricate the Polymer based Microfluidic Devices in Mechanical Engineering
Abstract: Polymers are suitable materials to fabricate the microfluidic devices in mechanical engineering. Hot embossing technology is useful to fabricate these polymer based microfluidic devices. Both of the lithography and direct bonding can be performed by hot embossing technology to fabricate these polymer based microfluidic devices. Polymer microfluidic devices fabricated by the hot embossing technology are useful in multifarious bioengineering applications according to the available literatures. Keywords: Hot embossing, Polymer, Microfluidics, …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 1, 2018 · pp. 34–37 Read article
-
Synthesis of Biodegradable Nano Composite of PMMA vinyl Polymer with Corn Cob
Abstract: Vinyl polymers are the largest category of polymers which have wide applications. PMMA is important vinyl polymer which when modified with with Corn Cob(agricultural waste) for nanocomposite formation, then it may result biodegradable modified polymer. Corn cobs (focal piece of maize) are either treated as waste or consumed as fuel causing ecological concern. So as to accomplish its worth option in new research regions, corn cob can be prepared synthetically …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 20–24 Read article
-
Comparative Experimental Measurement on the Fundamental Properties of Chemically Treated Natural Fibers
Abstract: Plant-derived natural fiber as a reinforcing component can play a prevalent role in the field of fiber reinforced polymer composite due to their obtainability, environmentally friendly, renewability, low- density, and low cost. Golden fiber (jute fiber)/coconut fiber can be a potential candidate to replace the synthetic fiber reinforced polymer composite. The influences of chemical treatments such as mercerization, sodium lauryl sulfate and a combination of mercerization and sodium lauryl sulfate …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 34–44 Read article
-
Review of Composites formed of Thermoplastic as Organic Fibers
Abstract: Composites made of structural monomers gave rise to thermoplastic polymers (TMCs). Due to their usage of a thermoplastic matrix, these materials really aren't chemically reactive. TMCs may be remoulded without degrading when heated and become softer. They harden into the final shape when they cool. Thermoplastic materials bonded with plant fibers may one day be used to create impact- absorbing structure for renewable power. Its impact features of organic fiber-reinforced …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 28–33 Read article
-
Charge Infusion in Organic Device: With and Without SWCNTs
Abstract: In nanotechnology field, invention of single walled carbon nanotubes (SWCNTs) is a noteworthy development. It creates the door for advanced development in scientific field. Due to their appealing mechanical, electrical, and thermal properties, SWCNTs have multivarious usages. In this work, we have examined and predicted how SWCNT will affect the device performance in which Thionine dye is intercalated between Indium Tin Oxide (ITO) coated glass and aluminium (Al) to form …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 1, 2023 · pp. 26–31 Read article
-
Evaluation of Adsorption Isotherm Parameters on Corrosion Rate of Metal using Water-Based Extracts as an Inhibitor in Acidic Medium
Abstract: The research showcases the evaluation of MCS metal corrosion rate in terms of the effect of temperature and adsorption isotherm parameters monitored using water-based extracts with the aim to predict the Gibb’s free energy characteristics on inhibition integrity of the metal sample in acidic medium of 1.0M of HCl The water-based extract used are Selaginella myosurus, SM and Pneumatopter is pennigera, GF and the inhibition performance with respect to temperature …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 1, 2023 · pp. 14–25 Read article
-
Effect of Fluid Viscosity and Iron-Fluid Composition on Damping Ability of Magnetorheological Damper during Hard Turning Process
Abstract: In manufacturing industry where metal cutting operation take place, tool vibration is an undesirable phenomenon which affects surface finish of the work piece, tool life and cause discomfort to human personal. In order to avoid tool vibration, the concept of magnetorheological (MR) damper was considered in this study. When a magnetic field is applied to the MR fluids, particle chains form and the fluid becomes a semisolid. This transition is …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 1–13 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
Experimental Investigation And Optimization Of Process Parameters For Thrust Force, Power Consumption And Energy Consumption During Drilling Of Mild Steel On Lathe Machine
Abstract: Drilling is one of the major operations to be carried out in almost every manufacturing industry. During this operation drilling tool drills the metal continuously which increases thrust force. Due to this force, power consumed during drilling operation. So in this research work an attempt to experimentally investigate and then optimization of the effect of different drill parameter like feed and spindle speed on the thrust force, power consumption and …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 1, 2016 · pp. 08–19 Read article
-
An Insight into Industrial Automation
Abstract: Automation is the process of following a pre-defined sequence of operations with or without human labour, by using specialized equipment and machines that perform and control manufacturing processes. Automation in full sense can only be achieved through the combined use of devices, techniques, and equipment capable of perceiving the manufacturing process, making decisions regarding the changes, needed in the operation, and control.
Published in International Journal of Mechanics and Design · Vol. 2, Issue 1, 2016 · pp. 33–36 Read article
-
Optimization of Process Parameters of GMAW for Penetration, Toughness and Tensile Strength by using Taguchi Method
Abstract: Aluminum and its alloys are having variety of applications in Aircraft, food processing etc. Moreover; the use of Aluminum and its alloys are increasing day by day due to its specific properties, like light weight, high strength, and excellent corrosion resistance. However; the present study is planned to analyze and optimize the aluminum weld joint characteristics like tensile strength, penetration and toughness by using Gas Metal arc welding (GMAW) welding. …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 1–9 Read article
-
A Review: Multipurpose Seed Sowing Machine
Abstract: The present review provides transient info concerning the varied varieties of innovations tired seed sowing instrumentality. the essential objective of sowing operation is to place the seed and plant food in rows at desired depth and seed to seed spacing, cowl the seeds with soil and supply correct compaction over the seed. The comparison between the normal Sowing technique and also the new projected machine which might perform variety of …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article