Search
1025 articles for “Potential”
-
Compressive Strength, Water Absorption and Temperature Effects on Partial Replacing Cement with GGBS, Micro Silica and Fly Ash
Abstract: Widespread research work for decades also in development throughout the globe in concrete technology in finding substitute materials which can incompletely change Pozzolonic Portland Cement (PPC) and which can also meet the necessities of the strength and durability performance of industrial by products like micro silica, ground granulated blast furnace slag, fly ash, etc. now termed as complimentary cementations materials (CCM) are quite promising. The increased quest for sustainable and …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 30–37 Read article
-
Analysis of Political Risks Affecting International Construction projects in Malaysia
Abstract: With the stable development of economy and a series of policies encouraging foreign investment and infrastructure construction, Malaysia becomes more attractive for international construction contractors. However, there is a lack of analysis of relevant political risks in Malaysia in previous literature. This paper aims to analyze the political risks affecting international construction projects in Malaysia. An assessment system with 11 political risk factors were established to calculate the scores of …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 2, 2019 · pp. 10–27 Read article
-
Strain-based Fatigue Test of Woven Glass-Epoxy Fabric Composites
Abstract: Strain based fatigue testing of Glass-Epoxy Composite Material in Tension-Tension loading is carried out by using positive load method to evaluate potential crack propagation, fiber fractures, de-laminations, etc. Through continuous stressing in the material, evaluation of life cycle capabilities of glass fiber composites are found which is essential for Research Development, Structural Design, Quality assurance, Modeling and finally Material Specifications. By using an epoxy resin with glass fiber prepared in …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 39–55 Read article
-
Clash Detection in Appropriate Technology Building Using Building Information Modelling (BIM)
Abstract: Building Information modelling (BIM) is a highly efficient software in Architecture, Engineering and construction (AEC industry). Clash detection technique is used to minimize the error as well as to minimize the cost and time. Especially in 2D drawings, lots of problems emerges at the time of execution. One of the best tools used in this project is clash detection tool which coordinates the building system in 3D models. This clash …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 15–24 Read article
-
Individual and Combined Effects of Lead Rubber Bearing and Fluid Viscous Damper Techniques on Seismic Response of Irregular Reinforced Concrete Buildings
Abstract: Most old structures that do not meet current seismic regulations may sustain significant damage or perhaps collapse as a result of an earthquake. The seismic enhancement could potentially help people survive a major earthquake. Since earthquake engineering began, not only in India but also in other nations, earthquake-resistant construction of reinforced concrete buildings has been a constant topic of research. Buildings are still being damaged as a result of earthquakes. …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 17–28 Read article
-
A Review on the Use of Nano-Silica in Cementitious Compositions
Abstract: With the advent of nanotechnology, the material properties of the concrete industry, allows engineers and architects to use various materials in structural applications that were once impossible. Nowadays, the researchers are mainly focusing on the basic technology of cementitious material at nano/atomic level. The researchers are continuing to improve the durability and sustainability of concrete and have realised significant enhancement in mechanical properties of nano-silica incorporated cementitious materials. This review …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 1–15 Read article
-
Utilization of Paper Waste in Making of Cement Concrete
Abstract: Cement manufacturing industry is one of the main carbon dioxide constructing sources moreover burning of fossil fuels and deforestation and concrete industry is one of the major consumers of natural virgin materials. India is the country that is facing a severe contest in the disposing the waste in landfills throughout the country. The landfill disposal is resulting in high disposal costs and potential environmental problems. If the current situation continues, …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 36–41 Read article
-
Investigation of strength of concrete by replacement of sand with copper slag and cement with sugarcane bagasse ash
Abstract: This investigational study conducted to observe the potential of Sugarcane Bagasse Ash as a cement replacing material which is similar to that of Portland Pozzolana Cement and Copper slag as a fine aggregate replacement material. Seven different concrete mixes with the Bagasse Ash replacement to the Portland Pozzolana cement and copper slag replacement are (5% + 40%, 10% + 15% , 10% + 25% , 10% + 35% , 10% …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 25–38 Read article
-
Assessment of Chloride Content in Plaster in Residential Buildings
Abstract: This study investigated the impact of chloride on building as per the age. Concrete samples were collected from buildings of different ages to measure chloride concentration. Findings revealed that chloride content increased with building age, potentially leading to decreased strength and damage. The research identified a significant concern of chloride-induced corrosion in older buildings, as chloride concentration increased with building age. To enhance the durability and safety of aging structures, …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 35–40 Read article
-
Optimizing Aggregate Gradation for Enhancing Strength Properties of Pervious Concrete
Abstract: Pervious concrete possesses high permeability enabling environmental applications like stormwater recharging. However, lower strength limits widespread infrastructure adoption necessitating enhancements. This study focuses on optimizing aggregate proportions for improving compressive and flexural strength. Mixes were developed with cement variations from 200-500 kg/m3 with fine to coarse aggregates ratios systematically altered. Strengths were measured as per ASTM C39 and ASTM C78. Results showed reduced water-cement ratio and balanced aggregate blends improved …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 41–49 Read article
-
The Environmental Impact of Soil Pollution on Human Health
Abstract: Soils are shaped by the decomposition of rock and organic matter over several years. Soil properties vary from place to place with difference in bedrock composition, climate and other factors. Certain chemical elements occur naturally in soils as components of minerals, yet may be toxic at some concentration. Various other potentially harmful substance may end up mixing with soils through human activities. This may lead to soil contamination which in …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 2, 2017 · pp. 29–34 Read article
-
Steepening Pit Walls- Geotechnical and Economic Implications
Abstract: Current approach to pit-wall analysis tends to separate designs into distinct categories. The first consideration involves analysis of slope in which discontinuities actively participate in the failure mobilization. The second involves design analysis of non-structural controls which could results in a wide range of failure mechanisms. The third and the least sought for approach is the economic assessment of the slope design which could render optimized pit slope and the …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 1, 2021 · pp. 45–57 Read article
-
Farming on Phone: Understanding Cotton Farmers’ Intentions and Feasibility to Adopt ICT-based Agro Advisory Services in Maharashtra, India
Abstract: The use of ICT tools in the agriculture sector for rural farmers has emerged as a potential for empowering farmers and improving their livelihoods as the phone-based agro-advisory services provide farmers with access to tailored relevant information to help them make better decisions about agricultural activities, crop yields, and better management of natural resources. However, understanding the impact of social structure on ICT adoption and perceived impacts is important to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 2, 2022 · pp. 14–25 Read article
-
Advancing the Strength of Expansive Soil using BioEnzyme and Pond-Ash
Abstract: Expansive soils are problematic and prone to ground movements, which can seriously harm underlying structures and reduce their carrying ability. The expansive nature of soils is activated by moisture fluctuations, causing it to expand and contract. There are many stabilizing chemicals that have been used to treat Black Cotton soil, including lime, cement, and fly ash. Recently, it has become clear that using bio-enzymes to stabilize soil has a lot …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 1, 2023 · pp. 18–27 Read article
-
Machine Learning Approach for Analysis of Ionosphere Parameters for Earthquake Precursors
Abstract: This research explores the relationship between seismic events and predictive indicators, focusing on machine learning-based strategies for early earthquake prediction. It dissects existing prediction approaches, highlighting ionospheric anomalies' correlation with seismic occurrences, particularly preceding earthquakes of magnitudes higher than 5.5. By identifying a lack of comprehensive long-term analyses in the field, the study emphasizes future trends in machine learning-driven EQ-PD techniques using GPS-TEC data for real-time anomaly detection. The methodology …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 2, 2023 · pp. 37–46 Read article
-
Experimental Study of Concrete Using Crumb Rubber with Partial Replacement of Fine Aggregates
Abstract: The cost effective About one crore 10 lakhs all types of new vehicles are added all year to the Indian roads. The increase of about three crores discarded tyres each year stance a potential threat to the environment. The greatest way to overcome this problem is to catch alternative aggregates for construction. The proposed work presents an investigational study of result of use of solid waste material (crumb rubber) in …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 1, 2018 · pp. 31–35 Read article
-
PREDICTION OF RECYCLED CONCRETE AGGREGATE SELF COMPACTING CONCRETE COMPRESSIVE STRENGTH USING MATHEMATICAL MODEL
Abstract: Sustainable Development aims at improving the standard of life without compromising the environmental qualities and for future needs. These objectives can be achieved through recycling of construction/demolished waste. In Past, land filling of Construction and Demolished waste materials was the general solution. As raw Construction Material Charges have risen dramatically, we have to look for alternative solutions and methods, such as recycling of demolished waste. Recycled Aggregate Concrete not only …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 34–43 Read article
-
SEISMIC ANALYSIS OF BUILDINGS USING DIRECT DISPLACEMENT BASED DESIGN
Abstract: Seismic resilience in structural engineering is a paramount concern, particularly in regionsprone to seismic activity. This research investigates the seismic performance of reinforced concretestructures with shear walls, employing two distinct design methodologies: Direct Displacement-BasedDesign (DDBD) and traditional Force-Based Design (FBD). Utilizing advanced computational toolssuch as ETABS software and the Response Spectrum Method, a comprehensive comparative analysis isconducted across multiple seismic zones, including Zones III, IV, and V. This study also …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 2, 2023 · pp. 32–46 Read article
-
Traffic Safety Under Mixed Traffic Flow: An Approach Towards Mix Modal Transport Planning
Abstract: Mixed Traffic flow is an important component in consideration in present day Transport Planning in the current scenario and future of transport planning in India. As country is welcoming the accent of Advanced technology, an introduction of Autonomous vehicles, a need of study raised for the safe flow of traffic into the mixed condition. This paper aims to study the traffic condition of current times comparing with the previous traffic …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 8, Issue 1, 2022 · pp. 1–13 Read article
-
Towards a Geotechnical Input-Based Conceptual Cost Estimating Methodology for Highway Projects
Abstract: The trend in the literature reveals a wide range of innovative approaches which have been proposed to improve the accuracy of conceptual estimates. These techniques are usually based on differing analytical approaches. Although these techniques obtain estimates that closely approximate actual costs, the requisite time and resources to gather sufficient data or obtain relevant information during initial project stages may not be possible. The study proposes that for a road …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 8, Issue 2, 2022 · pp. 28–37 Read article