Search
370 articles for “heat”
-
A Study on Sun Path of Coimbatore and Its Irradiation Effects on Buildings using Ecotect Software and Design Recommendations for Minimizing the Heat Gain
Abstract: Understanding the sun path graphically in a three-dimensional figure by means of software can help us to predict the effects of irradiation on the buildings at a specific location. The Ecotect software is a tool that gives a clear image of the movement of the sun all around the year with exact Azimuth and Altitude angles in both graphical and tabular format. This paper is a research based on the …
Published in International Journal of Architecture and Infrastructure Planning · Vol. 5, Issue 2, 2019 · pp. 36–47 Read article
-
Synthesis and Characterization of Graphene Nanoplatelets & Graphene Oxide Based Nanofluids With Their Comparative Analysis for Heat Transfer Applications
Abstract: Stability and thermal conductivity are the main features of nanofluids. Higher concentration of nanoparticles become the reason of agglomeration, so a balance equation is required for the preparation of remarkable nanofluids in the application point of view. In the present study, we describe a novel synthesis of graphene Nanoplatelets and graphene oxide based nanofluids with different concentration (0.001,0.003,0.005wt %) with the help of stock solution of 1mg/ml. The Hummer’s method …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 2, 2018 · pp. 13–29 Read article
-
Effect of nano Aluminum on Thermal Behavior and Ignition Characteristics of Al/KClO4 Thermite Composition
Abstract: Ignition experiments of micron size Al/KClO4 (ALCLO) thermite composition was carried out at high heating rate (40°C/min.) using DTA (differential thermal analysis), and it was observed that no ignition took place up to 700°C. Similarly in case of STA (simultaneous thermal analyzer) experiments, no ignition peaks were found up to 1100°C at 20/min. ALCLO when ignited in a bomb calorimeter for heat of combustion output measurement it produced a large …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 9–19 Read article
-
Thermal Simulation and an Analysis on an Exhaust Gas of a Teg Model using Fluent
Abstract: As the First law of Thermodynamic says “energy is directly proportional to work done” and law of conservation of energy “Energy can neither be created nor can be destroyed, it can only be transformed from one form to another”. Unfortunately any energy policy that produces improvements in the short term is often one that destroys the environment in the long run. It is a universal truth that no exponential growth …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 6, Issue 2, 2020 · pp. 30–48 Read article
-
Review on Thermoelectrical Generator and Software Analysis of Exhaust System
Abstract: In this century global warming is a very concerning issue. Vehicles are day-by-day increasing on roads, which emits harmful hot gases to environment. Due to exhaust gases and unwanted pollution TEG is a concept to utilize the heat energy of an engine for other works purposes. A major part of energy is being engaged in such issues. Here a study of conservation is being followed. TEG thermo-electric generator is a …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 2, 2020 · pp. 38–45 Read article
-
A review on the Solar Still
Abstract: In present scenario the problem of clean potable water is very crucial. Due to adverse weathercondition the potable water is not available in the required quantity. The available water is brackishand to convert that in to fresh water is the main requirement in present scenario. As per the report byWHO and UNICEF the improved quality of water is used by 91% world population. Due to rapidindustrialization and urbanization the requirement …
Published in International Journal of Mechanics and Design · Vol. 8, Issue 2, 2022 · pp. 1–6 Read article
-
Characterization of Tensile Properties of Dissimilar Welded Joints of 316 Stainless Steel and HSLA Steel
Abstract: In this research, dissimilar weld joints of 316 stainless steel/HSLA steel were produced using ER316L-16 and E7018 filler metals by varying welding parameters such as current and arc voltage. Heat input and travel speed was computed. The joints were subjected to tensile test and tensile values were determined, computed, recorded and analysed. The heat inputs were compared with the tensile test results. According to the results obtained and analysis carried …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 2, 2020 · pp. 1–7 Read article
-
A Study on Effect of Polarity on Mechanical Properties in Saw Process
Abstract: Welding is one of the most common fabrication techniques which is extensively used to obtain desirable quality welds for intended application in various structural components. The invariable importance of welding processes has been very well realized since long times ago, therefore till nowadays there is hardly any sector of human life which has not been benefited from applications of welding. Apart of quality of flux and welding parameters, welding processes …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 1–6 Read article
-
Study of Analysis, Design and Performance of Fin
Abstract: This paper discusses the use of extended surface heat transfer in heat exchangers. The size and cost of an exchanger is dependent upon the heat duty, the allowable pressure drop, and the geometry of the heat transfer area. The dominance of this resistance is often broken by the use of extended surfaces (fins), which will result in a lower area and hence smaller exchanger. This paper will consider which, if …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 3, Issue 2, 2017 · pp. 23–28 Read article
-
Computational Investigation on Performance of Rib Roughened Channel
Abstract: ABSTRACT: Improving the heat transfer efficiency of machinery is crucial since it can result in savings on energy, materials, and expenses. Rib-roughening on the heated plane is one method of increasing rate of heat transfer. Rib roughened surfaces are utilized in various industrial applications. Rib roughened surface disturbs the laminar sub-layer and increases the turbulence. Because of increase of turbulence and mixing, rate of heat transfer is improved. Pressure loss …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 1, 2026 · pp. 1–6 Read article
-
Continuous Renewable Energy Generation by Solar Radiation
Abstract: The world is seeing a changing trend from conventional cooking system to most reliable and predominant solar cooking system which is going wild commercially. This ideal attempts a heat energy storage for power generation in which a Molten Salt is proposed for Thermal Energy Storage for Concentrating Solar cooking systems. In the concept numerous large, flat, sun-tracking mirrors, known as trough are used which focuses sunlight onto a receiver at …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 4, Issue 2, 2018 · pp. 32–41 Read article
-
Nano based Phase Change Materials for Thermal Storage Applications: A Review
Abstract: Conventional thermal energy storage systems have low energy storage densities and are incapable of undergoing isothermal storage process. Phase Change Materials (PCMs) are gaining attention as potential materials for thermal energy storage from intermittent renewable energy sources. Latent heat storage materials (LHS) called PCMs can release or absorb heat energy when a change in physical state occurs. Although PCMs have high energy storage density, their poor thermal conductivity remains a …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 2, 2021 · pp. 28–33 Read article
-
Thermal Processes and Metallurgical Transformations: How Temperature Influences Metal Structures?
Abstract: The guide also addresses the selection criteria for different heat treatment processes based on the type of metal and the desired application, providing insights into the balance between performance requirements and economic considerations. Furthermore, it covers advancements in heat treatment technologies, such as induction heating and laser hardening, and their applications in modern manufacturing. By integrating theoretical concepts with practical examples, this guide serves as an essential resource for metallurgists, …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 1, 2023 · pp. 57–62 Read article
-
Thermal Modeling and Optimization of Irreversible Cogeneration Power Plant
Abstract: This paper aims at studying the cogeneration system coupled with outer heat reservoir of finite heat capacity and comprises of both external as well as internal irreversibility. External irreversibility is due to the finite-rate heat transfer between the working fluid and heat reservoirs while internal irreversibility is due to heat dissipation of working fluid. Both types of irreversibility are involved in the study on introducing an internal irreversible parameter which …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 1, Issue 2, 2015 · pp. 01–11 Read article
-
Analysis of Geological Structure for the Application of Geotechnical Engineering to Optimize Thermal Extraction in Geothermal Wells
Abstract: The characterization of the geological terrain for geothermal applications from the heat transfer point of view has been made. Horizontal, vertical and inclined geological layers have been analyzed. Uniform and homogeneous terrain are better candidates for low or high enthalpy geothermal applications while heterogeneous soil have a poorer performance from the thermal transfer point of view. The characterization process of soil structure and properties allows to take the appropriate decision …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 2, 2022 · pp. 26–35 Read article
-
Impact of Microcrack Healing Techniques on Resilient behavior of Asphalt Concrete
Abstract: Concentrated efforts on the development of innovative materials and techniques for asphalt pavement repair are going on, many of them related to crack healing. Flexible pavement usually practices repeated loading and environmental impacts and suffers distresses throughout its service life. Microcracks initiates and can heal itself under controlled conditions. In this Concentrated efforts on thedevelopment of innovative materials and techniquesfor asphalt pavement repair are going on, many of them related …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 6, Issue 1, 2020 · pp. 33–41 Read article
-
Study on the Properties and Applications of Thermoplastic
Abstract: Hot-applied thermoplastic is prepared for road deposition in a melting apparatus where the granular or block material is introduced and heated until it liquefies at temperatures exceeding 400F. When applied on asphaltic concrete, thermoplastic material develops a thermal bond via heat- fusion. A thermoplastic is a material, usually a plastic polymer, which becomes soft when heated and hard when cooled. Thermoplastic materials can be cooled and heated several times without …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 16–21 Read article
-
Analysis and Simulation of Computational Fluent Dynamic on Thermo-Electro-Mechanical Devices
Abstract: It is a universal truth that no exponential growth will last forever. In the present scenario, energy is avital part of development in environment. As the law of conservation of energy “Energy can neither becreated nor can be destroyed, it can only be transformed from one form to another”. Unfortunately,any energy policy that produces improvements in the short term is often one that destroys theenvironment in the long run. Here …
Published in International Journal of Computer Aided Manufacturing · Vol. 7, Issue 1, 2021 Read article
-
Use of Titanium as filter on chimney
Abstract: Industrial chimneys are one of the largest contributors to air pollution, releasing a wide range of harmful gases and fine particulate matter into the atmosphere. These emissions significantly degrade environmental quality and contribute to long-term public health risks such as respiratory diseases and cardiovascular complications. Traditional air pollution control devices used in industrial exhaust systems, including electrostatic precipitators and bag filters, often struggle with high operational costs, frequent maintenance, and …
Published in International Journal of Analytical and Applied Chemistry · Vol. 11, Issue 2, 2025 · pp. 120–126 Read article
-
Parametric Analysis of Ribbed Channels for Gas Turbine Engines
Abstract: This work uses experimental data to validate a ribbed surface that is computationally examined interior passageway of a static blade on a turbine. to replicate an illustration from a released publication while researching the Computational Fluid Dynamic conjugated heat transmission. The turbulence simulation matched the most closely. Publicly available physical practical results were found by working on Ansys Workbench. Convective heat exchange efficiencies additionally to stress profiles utilizing those computationally …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 9, Issue 2, 2023 · pp. 28–34 Read article