All articles
7063 articles
-
Induced codeposition of Ni-W alloy coatings using glycerol as additive and their characterization
Abstract: As a promising coating material to replace hard chromium coating, the development of nickel–tungsten (Ni-W) alloy coatings of good corrosion protection is of great interest in surface coating technology. Further, the effect of plating variables, including additive on the composition of alloys of induced co-deposition is more vagarious than in other types of alloy deposition. In this regard, an alkaline citrate bath has been formulated for electrodeposition of Ni-W alloy …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 1–9 Read article
-
I–V Measurement System for Solar Simulator
Abstract: This paper deals with “I–V Measurement system for solar simulator”. In this paper, device developed is capable of handling solar cell model of open voltage from 6 to 60 V with the short circuit current upto 10 A. For the linear I–V characteristics measurement a linear current source from 0 to 2 A is resemble with a BJT amplifier and the measurement time for the current is 1 ms. In …
Published in International Journal of Embedded Systems and Emerging Technologies · Vol. 2, Issue 1, 2016 · pp. 5–10 Read article
-
The decomposition of tris-(oxalato)-manganate (III) complex ion as the reaction suitable for the laboratory practice on chemical kinetics
Abstract: The complex ion [Mn(C2O4)3]3- is very photosensitive and rapidly decomposes at the daylight even at ambient temperatures. Although the mechanism of this reaction is complicated, its kinetic equation obeys the pseudo-first order. In addition, the tris-(oxalate)-manganate ion has a low thermal stability, and the reaction of its decomposition is highly affected by temperature. This makes this reaction very suitable for demonstrating the laws of chemical kinetics to the students – …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 2, Issue 2, 2016 · pp. 1–10 Read article
-
Aspects of Advanced Manufacturing Technologies : The Review
Abstract: The advanced manufacturing systems helps to improve the production processes and various management techniques. Advanced manufacturing Technology (AMT) involves the innovative integration and optimisation of new technology. This helps to increase the productivity and flexibility. In this research paper several factors have been studied from the literature review Key words: Advanced, Manufacturing, factors, production
Published in International Journal of Computer Aided Manufacturing · Vol. 1, Issue 1, 2016 · pp. 07–09 Read article
-
COMPUTATIONAL AND PARAMETRIC INVESTIGATION ON SINGLE CYLINDER SI ENGINE BASED GENERATOR TO IMPROVE ITS PERFORMANCE AND EMISSION CHARECTERISTICS AS PER THE FUTURE EMISSION NORMS.
Abstract: This work is based on single cylinder SI engine based generator,which is basically working on Gasoline and LPG in Dual fuel mode.The main purpose of this work is to use Alternative fuel,for reducing the emissions of the generator in dual fuel mode.As the engine is dedicated to Gasoline engine,which is conventional fuel.So power is comparatively increasing in case of gasoline engine,but emissions are more as compared to Alternative fuels.Since alternative …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 1, Issue 1, 2015 · pp. 01–10 Read article
-
Review on Quantum Ballistic Transport Model
Abstract: Nanowire MOSFETs are perceived as a standout amongst the most encouraging possibility to expand Moore's law into nanoelectronics period. This paper audits the procedure, application, gadget material science and minimal demonstrating of Gate All around (GAA) nanowire MOSFETs. The most broadly utilized techniques for nanowire combination have been examined. The paper shows the different gadget enhancement methods and scaling capability of nanowire transistors. A process sensitivity study of silicon nanowire …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 1, 2016 · pp. 47–49 Read article
-
Gold Nanoparticles and its Preparation
Abstract: Among the colorimetric detection tactics, metallic nanoparticle based detection is gaining more attention due to quickness and less resource requirement at the point of use. Unique chemical inertness, shape, size and optical attributes of gold nanoparticles (GNPs) make them ideal for various diagnostic tools. In this approach synthesized GNPs were tabilized by citrate counter ions. These GNPs were characterized for their optical properties, shape, size, zeta potential, and dynamic light …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 1, 2016 · pp. 31–34 Read article
-
NANOTECHNOLOGIES FOR THE FUTURE
Abstract: The needs of the world are growing while the sources are decreasing. The existing systems have not been able to cope up this developing situation. It is likely that with the fast increasing population will worsen this situation. All types of sciences, commerce and arts have not been able to provide the solutions to this situation so far. Nanotechnology is the new field which provides us some hope to meet …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 1, 2016 · pp. 35–46 Read article
-
Cutting Tools with Graphene Coating and Its Uses
Abstract: Graphene attracts a certain interests because of its amazing properties like high temperature operations, high mechanical quality and greasing up properties and so forth. Arshi and Dighewar have examined to enhance surface unpleasantness, apparatus life and creation rate of materials by utilizing a defensive covering of titanium nitride (TiN) over steel devices.[1] They have acquired attractive results. In this paper, we utilize graphene as a covering on metal cutting apparatuses …
Published in International Journal of Applied Nanotechnology · Vol. 2, Issue 1, 2016 · pp. 24–26 Read article
-
Use of Atomic Force Microscopy on Lithium-Ion Batteries
Abstract: Improvement of cutting edge Lithium Ion Batteries (LIBs) shows a quickly developing field of science and innovation. In any case, numerous crucial issues stayed uncertain because of absence of comprehension of surface/interface understanding of LIB on nanometer scale. Here, we survey late uses of nuclear power microscopy to study three key parts of lithium particle batteries specifically strong electrolyte interface, particle transportation and dendrite development. In situ AFM is a …
Published in International Journal of Applied Nanotechnology · Vol. 2, Issue 1, 2016 · pp. 21–23 Read article
-
Silver Nanoparticle Ink for Rapid prototyping in Printed Electronics
Abstract: Now a day, Printed Electronics technology is very popular all over the world. It is very flexible and cost effective technology. It can replace the traditional technologies. By this technology, one can convert the rigid circuit board into flexible circuit board by printing the circuit on any substrate with the help of nanosilver conductive ink. The conductivity of nanosilver ink increases as the particle size is very small in nanometers. …
Published in International Journal of Applied Nanotechnology · Vol. 2, Issue 1, 2016 · pp. 17–20 Read article
-
Effect Of Capping Agents And Annealing On The Optical Properties Of (Cd0.8-Zn0.2)S And (Cd0.8-Zn0.2)S:Eu Films Prepared By CBD Technique
Abstract: Thin films of (Cd0.8-Zn0.2)S and (Cd0.8-Zn0.2)S:Eu are prepared by Chemical Bath Deposition (CBD) technique on glass substrates at 60ºC temperature by adding Mercaptoethanol and Methanol as capping agents(CA). The films were annealed at 400°C for two minutes and their optical properties were studied. The effect of the presence of capping agents and annealing was investigated. The optical constants such as refractive index, extinction coefficient, optical and electrical conductivity, real and …
Published in International Journal of Applied Nanotechnology · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
Synthesis of Zinc Oxide Nanoparticles by Simple Hydrothermal Process
Abstract: Rapid synthesis of zinc oxide nanoparticles through economically feasible hydrothermal approach is highly desirable. In this study, we have developed a method to synthesize zinc oxide nanoparticles by using simple hydrothermal process in aqueous zinc salt solution (ZnCl2) without need of any surfactant or external energy. This experimentation produced physiologically stable, bio-compatible ZnONPs which may be used for targeted drug delivery that offers enhanced therapeutic efficacy and minimal side effects. …
Published in International Journal of Applied Nanotechnology · Vol. 2, Issue 1, 2016 · pp. 8–16 Read article
-
Deposition and Characterization of ZnO Thin Films by Thermal Vacuum Thermal Evaporation Method for Photoconductive Sensor Application
Abstract: In this work we have deposited ZnO thin films using thermal evaporation method. The films have been deposited on silicon substrate for structural characterization and on glass substrate for optical characterization. The structural, surface morphology, optical properties and electrical properties of ZnO thin films were investigated systematically using X-ray diffractometer (XRD), scanning electron microscope (SEM), atomic force microscopy (AFM), ellipsometeric measurement and semiconductor parameter analyzer respectively. The deposited ZnO thin …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
Nanocrystalline Silicon Carbide for Implants
Abstract: Nanocrystalline silicon carbide (SiC) is a wannabe material for artificial heart valves fundamentally because of its low weight, high quality, intense hardness, wear resistance, latency (SiC does not respond with organic liquids), and disintegration resistance. Oxide clay materials, for example, alumina (Al2O3) and zirconia (ZrO2) are regularly utilized for restorative applications like inserts and prostheses due to their breathtaking biocompatibility and high wear resistance. Sadly, oxide earthenware production can't be …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 1, 2016 · pp. 20–24 Read article
-
Barcoding of DNA
Abstract: DNA barcoding framework is a promising methodology towards the onclusion of organic differing qualities utilizing DNA successions as an essential key for recovery of hereditary data. It is rising as an nstitutionalized technique for mapping different species on the earth. DNA barcoding is an instrument for ID of new species, preservation of imperiled species and bunching of different species under a specific gathering. Numerous databases have been produced over the …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 1, 2016 · pp. 14–19 Read article
-
Bioinformatics Laboratory and Its Importance: A Review
Abstract: The quick mechanical change is changing the world in which we live. Since research facility administrations are characterized by accessible items and apparatuses of innovation, this mechanical transformation is having a noteworthy and significant impact on how clinical labs are composed, staffed, prepared, and worked. In this survey, I examine exclusively and all things considered the advances and improvements being made in the general zones of estimation, computerized, and transportation …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 1, 2016 · pp. 10–13 Read article
-
Saccharomyces cerevisiae and Its Usage in Electricity Generation
Abstract: The reasonable, practical and vitality productive wastewater treatment remains an inquisitive worry among researchers. Microbial power device (MFC) can offer such rich arrangements. MFC is an electrochemical framework that proselytes substance vitality of concoction mixes into power through metabolic exercises of microorganisms. MFCs are financially savvy approach for wastewater treatment because of expulsion of contaminants from wastewater while in the meantime delivering electrical force. The wastewater, which is a wellspring …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 1, 2016 · pp. 5–9 Read article
-
An Analytical Study of Structural Optical Properties of CaAl2O4 Phosphors by Sol–Gel Method
Abstract: A comparative study of structure, morphology and optical properties of CaAl2O4 Phosphors by In this paper, monoclinic CaAl2O4 phosphor with various weight rate of aluminum was blended by low temperature sol–gel technique. The readied tests were described by X-beam diffraction (XRD) examination, Fourier change infrared (FTIR), checking electron microscopy (SEM), vitality dispersive spectroscopy (EDS) and photoluminescence discharge spectra (PL). The XRD examination demonstrated that CaAl2O4 have monoclinic structure. The normal …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 1, 2016 · pp. 1–4 Read article
-
Kinetics vs. Thermodynamics: An Overview
Abstract: Almost every chemical reaction has a kinetic and a thermodynamic aspect. The terms ‘kinetic’ and ‘thermodynamic’ though inter-related are two different facets of a chemical reaction. Here is an overview of the underlying relationships between the two through application to chemical reactions and an example from natural processes. Keywords: activation energy, chemical reaction, kinetic, reactant, thermodynamics
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 2, Issue 1, 2016 · pp. 25–27 Read article