Search
872 articles for “parameters”
-
Isothermal CSTR Heat Exchanger Rating Models for Acetic Acid Production using Homogeneous Catalysed Reaction
Abstract: This work deals with the development of design models for heat exchanger rating in homogeneouscatalytic acetic acid production at isothermal condition exploiting the derived continuous stirred tankreactor heat generation per unit volume equations at constant temperature. Coil in tank heatexchanger is invoked for this study resulting to novel design equations which were stochasticallyexamined and found to be capable of simulating the rating performance dimensions as a function ofkinetic parameters. The …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 1, 2021 · pp. 14–28 Read article
-
Evaluation of Thermodynamic Properties of Helium using Cubic Equation of State based Approach for Energy Industry Applications
Abstract: Equations of state based methods are important techniques for thermodynamic property prediction ofcompounds and mixtures. The Peng-Robinson cubic equation of state is one of the most well-knownformulations for gases and gas mixtures used in the process and energy industries. In this study, it isused to predict pertinent thermodynamic state variables of helium gas for its use in very hightemperature as well as extremely low temperature thermodynamic cycle application for powergeneration …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 1, 2021 · pp. 1–9 Read article
-
Design of a Plug Flow Reactor for Production of Refrigerants from Natural Gas Chlorination
Abstract: The design of a plug flow reactor and distillation column for the production of refrigerants from natural gas chlorination, was aimed at achieving high purity volume percent of Methyl Chloride (CH3Cl) and Methylene Chloride as desired products. Aspen HYSYS software was used to simulate the reactor. The reaction was carried out at a temperature of 3000C and 1atm Pressure, Methane to Chlorine ratio was set at 1.5:1 to favour the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 10–22 Read article
-
Corrosion Protection of Copper Metal by Nanocoating in Nitrogen dioxide Environment
Abstract: Nitrogen dioxide is an acidic gas. It absorbs moisture to produce nitric acid. It creates corrosive medium for copper metal. It forms corrosion cell on the surface of copper and accelerate corrosion reactions. The corrosion cell formation is written as: Cu|Cu2+||H+|H2 thus corrosion reactions start and copper is oxidized into Cu2+surface and it is oxidized into Cu2+ whereas H+ ion is reduced into H2. Nitric acid environment copper exhibits galvanic, …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 1–11 Read article
-
Novel Approaches to Thermodynamic Optimization in Industrial Processes
Abstract: Thermodynamic optimization in industrial processes stands as a pivotal pursuit in enhancing efficiency, sustainability, and economic viability. Traditional methodologies have primarily focused on established principles, yet the escalating demands for resource conservation and emissions reduction necessitate innovative strategies. This abstract presents a compendium of novel approaches aimed at revolutionizing thermodynamic optimization in industrial settings. Firstly, the incorporation of advanced machine learning algorithms unveils unprecedented opportunities for predictive modeling and real-time …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 2, 2023 · pp. 20–25 Read article
-
Thermodynamic Optimization of Renewable Energy Processes
Abstract: In the pursuit of sustainable energy solutions, the thermodynamic optimization of renewable energy processes plays a crucial role in enhancing efficiency and reducing environmental impact. This paper explores the principles and methodologies involved in optimizing various renewable energy systems, including solar, wind, biomass, and geothermal energy. By leveraging the fundamentals of thermodynamics, the study examines key parameters and performance indicators to identify optimal operating conditions and design configurations. The analysis …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 2, 2023 · pp. 31–37 Read article
-
Predictive Model to Monitor the Rate of Dissolved Nitrogen Influenced by Void Ratio in Silty and Gravel Bed Formation in Coastal Area of Warri Delta State of Nigeria
Abstract: This paper evaluated the rate of dissolved nitrogen in silty and gravel soil formation, the study is to monitor the rate of dissolved nitrogen at different strata to phreatic bed, homogeneous formation were observed to have deposit in the study location, organic soil were insignificant since the formation deposited slight quantity, the predominant formation is homogeneous silty and grave soil strata, the void ratio deposition were at high rate in …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 42–48 Read article
-
Monitoring Fungi Transport Influenced by Heterogeneous Porous Sand Gravel Formation in Coastal Area of Port Harcourt
Abstract: This paper monitors the transport of fungi concentration in sand gravel formation, the formation were observed to develop heterogeneity in porous deposited strata, the migration process of fungi were observed from the simulation values through graphical representation, fluctuation of fungi concentration were experienced on the process of migration in exponential phase, the deposition of micronutrients were found to be under fluctuation in the soil thus affect the growth rate of …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 49–57 Read article
-
SUMMERIZING STRUCTURE AND FUNCTION OF FORMWORK IN MULTI STORIED RCC BUILDING
Abstract: The formwork system of floor slab is an important element in construction of multi-storied RCC buildings which governs the duration and cost of construction. The formwork and shoring structure does not extend to the foundation after the first few slab levels. Generally the formwork and back propping of one or two levels is provided. The research articles give insight on various technical parameters (slab shore load distribution, age of concrete, …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 1, 2022 · pp. 1–8 Read article
-
Procurement and Deployment of Equipment for Contracts in Civil Engineering Construction
Abstract: Many contracts have suffered a lot of delays and have faced challenges due to procurement-related matters and inadequate manpower to handle equipment for optimal performance. This study was aimed at the procurement of equipment and utilization of machines in civil engineering contracts. Methodology is basically site visitation, literature review and discussion with engineers, experts and workers on site. Parameters are liable for the procurement of materials and utilizing their lead …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 29–37 Read article
-
Development of Smart Strips in The House for Safety Monitoring
Abstract: The safety monitoring of residential premises has emerged as a subject of significant interest among numerous researchers. The exploration of effective methods and technologies for ensuring the safety of residential spaces has garnered considerable attention and continues to be a focal point of research efforts.. Moreover, this monitoring and control are greatly facilitated these days with the advancement in wireless data transmission technology. A smart Wireless sensor network is the …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 1, 2023 · pp. 30–38 Read article
-
Review on the Performance of Fibre and Industrial Slag in Concrete
Abstract: This review paper discusses about the different types of fibre used in concrete at different periods with the mix parameter details. This review enlightens the effect of industrial waste such as Bottom ash, Copper slag, Ferro-chromium slag, Ground granulated blast furnace slag (GGBFS), Steel slag, Stainless steel slag as a substitute in concrete. The elaborate study on its chemical composition and also the merits and demerits of using the slag …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 16–30 Read article
-
Fracture and Failure of Recycled Aggregate Concrete (RAC) – A Review
Abstract: In the world, many countries put into effect the renewal plans and/or the laws and/or the regulations for recent engineering structures which have reached their lifetime, are risk prone and have been built lacking quality engineering, or without considering urban planning. Hence, many structures are demolished and this situation increases the amount of construction and demolition waste (C & DW). Also, resource consumptions are rapidly increased due to excessive constructional …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 31–48 Read article
-
Influence of Type and Size of Fine Aggregate on Glass Fiber Reinforced Self-Compacting Mortars (GFRSCM)
Abstract: Abstract This paper addresses the fresh and hardened state behavior of glass fiber reinforced self-compacting mortars (GFSCMs) with various types and sizes of fine aggregate. Mini-slump flow and mini V-funnel tests were performed to evaluate the workability of GFSCMs. Compressive strength, split tensile strength, and flexural strength tests at the end of 28 days of water curing were determined. Water sorptivity tests were conducted on 28-day cured cube specimens. The …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 63–71 Read article
-
Effect of variation of Elevated Temperature on Compressive Strength of Metakolin concrete
Abstract: It has been found that high early temperature has negative impacts on later compressive strength of concrete. Some researchers investigated the adverse effect on long term strength of concrete due to high initial temperature. The effect of temperature on different properties of concrete is considerable and remained the subject of research activities of a lot of researchers. Different investigators moved in different ways and investigated temperature effect by changing different …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 9–16 Read article
-
Use of Recycled Aggregates in Concrete to Achieve Characteristic Strength M50 with Addition to Steel Fibre
Abstract: Concrete is World’s second most consumed material after water, use of recycled aggregate (RA) in concrete can be useful for environmental protection. Recycled aggregates are the materials for the future. Aggregate is one of the main ingredients in producing concrete. It covers 75% of the total for any concrete mix. The strength of the concrete depends on the properties of aggregates used. The experimental analysis comprise with normal RAC and …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 1–8 Read article
-
Improving Durability of Asphalt Pavement Wearing Course Submerged in Water Using Candle Wax as Water Proofing Agent: An Assessment Using RSI, FDI and SDI
Abstract: Asphalt pavements are designed and constructed to meet mostly stability and durability requirements during its design life. However, durability of asphalt pavements also heavily depends on other physical parameters as good drainage facility apart from having good material mix and structural designs. In the wake of asphalt pavements not supported by good drainage measures it is very likely that these pavements will fail sooner than later. On this basis, the …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 1–10 Read article
-
Analysis of Gravity Dam for Different Rectangular Openings Sizes
Abstract: Gravity dams are very important structures. Different parameters which come in loading combination are temperature, dead weight, earthquake, hydrostatic pressure and water load. From the study, it has been found that the properties which affect the performance of a dam are static properties and thermal properties. Static properties of the concrete dam are strength, Poisson’s ratio and elastic modulus while thermal properties are specific heat, thermal expansion coefficient, thermal conductivity …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 11–17 Read article
-
An overview on the rheology of recycled aggregate concrete with the influence of chemical admixtures
Abstract: : Concrete is one of the most widely used construction material because of its property to be moulded into any kind of structure and shape due to its fluidity at early stages. The fresh properties of concrete can be characterized by its flow behaviour. Rheology is the scientific description of flow properties. Super-plasticizers and air-entrainers are some of the most used chemical admixtures that affect the rheological parameters of fresh …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 14–24 Read article
-
Experimental Study of Mechanical Properties Geopolymer Concrete.
Abstract: This experimental study aimed to define the parameters for optimum mix design of geopolymer concrete made by partial replacement of cement. The geopolymer concrete is nothing but the formation of fly ash and alkali activators. Fly ash is the waste product from the thermal power station and may use as the pozzolanic material. But, only fly ash is may not the only replacement for the cement, for the more binding …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 16–22 Read article