Search
168 articles for “surface water”
-
Short Review on Nanofluidics with the Experimental Demonstration on Microfluidic Capillary Flow inside Microchannel Bends
Abstract: In this research work, author has presented a short review on nanofluidics. Total three individual microchannel bends as microfluidic devices are designed, fabricated and tested in this experimental work using author’s own hands-on completely. Polymethylmethacrylate (PMMA) is the selected polymeric material to fabricate these microfluidic devices. Dyed water is prepared as working liquid to test these microfluidic devices. According to this experimental study, the surface-driven microfluidic flow of dyed water …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 1, 2020 · pp. 16–22 Read article
-
Harvesting and Managing Rainwater
Abstract: Rainfall harvesting, or RWH, is the practice of gathering and holding onto rainfall rather than allowing it to run off. This water is typically gathered from surfaces like rooftops and redirected into tanks, cisterns, wells, aquifers, or reservoirs that allow it to percolate and replenish groundwater. Additionally, dew and fog can be captured using nets or similar devices. Unlike stormwater harvesting, which collects runoff from various surfaces, RWH focuses on …
Published in International Journal of Green Chemistry · Vol. 10, Issue 1, 2024 · pp. 14–19 Read article
-
Water Balance Management in Urban Sector
Abstract: Abstract In India, there is a rapid population growth which is accompanied by migration of people from rural to urban areas. By 2025, one half of India’s population is expected to get shifted to urban centers. In future the population will increase and hence the demand of water will increase. Present water demand of the urban sector is being fulfilled through water intake from nearest River and supplemented by exploration …
Published in International Journal of Town Planning and Management · Vol. 1, Issue 2, 2015 · pp. 15–18 Read article
-
The Lifespan of a Building: Evolution and Durability
Abstract: Abstract The structural lifespan of buildings and infrastructure decreases over time due to material degradation, with water penetration being a major contributing factor. Excess moisture weakens construction materials, leading to deterioration and reduced service life. Water absorption plays a critical role in structural degradation, particularly affecting foundations when infiltration occurs below ground level. In bridge structures, water-induced foundation instability can lead to failure, while in roadways, moisture weakens pavement layers, …
Published in International Journal of Construction Engineering and Planning · Vol. 11, Issue 1, 2025 · pp. 1–7 Read article
-
Ground Water Quality Assessment and Testing for Irrigation Purpose, in irrigation potential Areas of Eastern Ethiopia
Abstract: Ground water quality test was conducted for different purpose in line with that irrigation water is the major issue related with crop production in terms of yield reduction due to soil salinization. Mostly, ground water contain significant amounts of detrimental substances that may reduce soil production and productivity. In the Easter parts of Ethiopia, surface and ground water not yet tested but salinity problems become worsening in the area. Thus, …
Published in International Journal of Water Resources Engineering · Vol. 8, Issue 1, 2022 · pp. 1–11 Read article
-
A review - Inhancing the Performance of Self-Curing Concrete Using Polyethylene Glycol as an Internal Curing Agent
Abstract: Abstract—This study examines the use of Polyethylene Glycol (PEG-400) as an internal curing agent in concrete, offering a sustainable alternative to traditional water-curing methods. The research addresses the challenge of water scarcity in the construction industry by introducing a self-curing system capable of retaining internal moisture to support prolonged cement hydration. PEG-400, a water-soluble polymer, was added to concrete mixes at different dosages to assess its influence on hydration, shrinkage …
Published in International Journal of Concrete Technology · Vol. 12, Issue 1, 2026 · pp. 1–6 Read article
-
Aerogel to Study Nano-composite
Abstract: This article has linked to economic aerogel utility of build as by apply of thermal insulation from high and low temptation than usual subscription. Aerogel for building construction always esteemed to be damp proof reticulated architected formation. Space mission is inclusive afterwards as an energy absorber. Typified composite form mostly subjected to class as notified form after solidification on drying gelatinous composes from carbon, clay and silica. Multifunctional material characteristics …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 1–10 Read article
-
Comparative Modeling of Pavement Surface Texture Variables Using ANN and SPSS Software
Abstract: The health of Roadway pavement surface is considered as one of the major issues for safe driving. Pavement surface condition is usually referred to micro and macro textures which enhances the friction between the pavement surface and vehicular tires, while it provides a proper drainage for heavy rainfall water. Measurement of the surface texture is not yet standardized, and many different techniques are implemented by various road agencies around the …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 2, Issue 2, 2016 · pp. 30–40 Read article
-
Facile Fabrication of Durable Superhydrophobic Coatings on SS 304 for biomedical applications
Abstract: A simple and effective method to fabricate durable superhydrophobic coatings by combining shot-blasting and depositing sol-gel nanocomposite coatings on stainless steel SS 304 substrates has been investigated. Shot-blasting was used for two purposes; 1) as a method of physical modification for creating microscale roughness on the substrate and 2) for improving the adhesion of the nanocomposite coatings deposited thereafter. Organic-inorganic hybrid hydrophobic silica sol was synthesized where silica nanoparticles were …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 2, 2018 · pp. 21–34 Read article
-
Mass Transport of Heavy Metals in Soil Columns Amended with Biochar Nanoparticles
Abstract: Biochar has potential as a valuable material for removing heavy metals from wastewater. The biochar obtained by pyrolysis of the Pomegranate Peel (PPBC) under an oxygen-limited atmosphere in a muffle furnace at 450°C. The biochar was also analyzed through SEM and FTIR for identification of particle size and functional groups. Therefore, the present work aims to study the effect of adding biochar to the soil columns (10 cm length and …
Published in International Journal of Agrochemistry · Vol. 6, Issue 1, 2020 · pp. 62–72 Read article
-
Short Report on the Effect of Atmospheric Dielectric Barrier Discharge Plasma Processing to Control the Capillary Flow in Polymer based Microfluidic Devices
Abstract: In this experimental work, a couple of microfluidic devices are fabricated by polymethylmethacrylate (PMMA) using the maskless lithography, hot embossing lithography and direct bonding technique. One device is fabricated by pristine PMMA, and the other device is fabricated by dielectric barrier discharge (DBD) plasma processed PMMA. Dyed water is selected and prepared as working liquid. Each surface-driven capillary flow of dyed water is recorded by a CMOS camera. This work …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 2, 2020 · pp. 1–4 Read article
-
Comprehensive Review of Membrane Fouling Control Mechanisms
Abstract: One of the biggest problems with membrane-based separation procedures is membrane fouling. As particles, organic matter, microbes, and other materials build up on the membrane’s surface or inside its pores, the effectiveness of membranes – such as those used in reverse osmosis, ultrafiltration, and microfiltration – declines over time. The effectiveness and longevity of the membrane are eventually lowered because of this fouling, which causes a drop in flux and …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 2, 2025 · pp. 1–9 Read article
-
Study and Design of Permeable Pavement
Abstract: The purpose of this review paper is to study the advantages of the permeable pavement system and also understanding the current research works and line of works to recommend the future areas of research works. This review paper also defines the importance of permeable pavement systems in the sustainable drainage system in both the urban and rural areas for both the traditional and modern method and also discussed more on …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 34–42 Read article
-
Experimental Demonstration on Polymer based Microfluidics
Abstract: In this experimental work, a single polymer based gradual expansion microchannel is designed. This microchannel is fabricated by the maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory. Dyed water is the prepared working liquid in this work. The surface-driven (passive) microfluidic flow of dyed water is recorded in the fabricated device using a CMOS camera catching 25 frames per second with a corresponding time-scale resolution …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 23–26 Read article
-
MODELING COGENERATION SYSTEM IN SHALLOW GEOTHERMAL INSTALLATIONS
Abstract: ABSTRACTThis paper presents a theoretical modeling of a cogeneration system using multiple heat exchangers and thermoelectric generator. The modeled system, designed for shallow geothermal energy, is a closed piping unit containing water as heat transfer fluid that circulates through a closed loop releasing thermal energy at the surface for heating and sanitary hot water. In addition, a Peltier cells array is attached to the piping system to generate electricity, thus …
Published in International Journal of Analog Integrated Circuits · Vol. 6, Issue 1, 2020 · pp. 41–52 Read article
-
Floating Architecture – An Improved Way of Living
Abstract: Due to climatic changes, dearth of usable land, abundant water quota of the Earth surface, and rising income of the people, floating building is emerging as a strong and attractive alternate to the inland housing system. The intention of this research is to share some reference ideas for new building projects in and around water bodies through review of various projects. A new paradigm of architecture is outlined as a …
Published in International Journal of Architecture and Infrastructure Planning · Vol. 3, Issue 1, 2017 · pp. 13–18 Read article
-
Effects of Field Irrigation Method on The Peanut Crop
Abstract: Most of the water resources around the world are consumed in irrigation. Irrigation water lost in field water application depends mainly on the field irrigation method. This study aims to investigate the effects of irrigation methods on the agriculture and irrigation processes of the peanut crop. In a field experiment, the area was divided into four different zones where peanut was irrigated using four different irrigation methods: drip irrigation, sprinkler …
Published in International Journal of Water Resources Engineering · Vol. 9, Issue 1, 2023 · pp. 1–10 Read article
-
Use of the electroflotation for oil spill or oil products cleanup from sea or waste water as a new environmental technology
Abstract: Among the existing today methods of cleaning of oil spill and oil products from sea or waste water most perspective for cost-effective and highly effective properties is the electroflotation. However, main problem in the all existing electroflotation methods of cleaning is the increase of the saltiness of the space near the cathode as a result of passing of the electric current through the sea or waste water that covers cathode’s …
Published in International Journal of Green Chemistry · Vol. 5, Issue 2, 2019 · pp. 22–29 Read article
-
A review on the Solar Still
Abstract: In present scenario the problem of clean potable water is very crucial. Due to adverse weathercondition the potable water is not available in the required quantity. The available water is brackishand to convert that in to fresh water is the main requirement in present scenario. As per the report byWHO and UNICEF the improved quality of water is used by 91% world population. Due to rapidindustrialization and urbanization the requirement …
Published in International Journal of Mechanics and Design · Vol. 8, Issue 2, 2022 · pp. 1–6 Read article
-
Short Review on Passive Capillary Flow in Microfluidics with an Experimental Demonstration about the SU-8 based Microfluidic Device
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is fabricated by maskless lithography and indirect bonding technique. The surface-driven microfluidic flow of dyed water is recorded in the fabricated SU-8 device. Negative photoresist SU-8 is an efficient polymer to fabricate the microfluidic devices. A brief review on surface-driven passive microfluidic flow is provided in this short experimental report towards the applications in microfluidic lab-on-a-chip systems. This short …
Published in International Journal of Analytical and Applied Chemistry · Vol. 8, Issue 1, 2022 · pp. 1–6 Read article