Search
1760 articles for “Applications”
-
Synthesis & Characterization of Fe3O4 Nanoparticles for Thermal Sensing Application
Abstract: n this work, Synthesis and characterization of magnetite (Fe3O4) nanoparticles by the co-precipitation method has been done. These nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), UV-Visible spectroscopy (UV) and Thermogravimetry analysis (TGA/DSC). SEM image show morphology and porosity of material. The nanoparticles show quasi-spherical morphology with mean size around 37 nm. The XRD and FTIR confirmed the functionalization of the Fe3O4 nanoparticles. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 10–19 Read article
-
Preparation of Conducting Polyaniline Film for OLED Application
Abstract: Polyaniline is a conducting polymer of the semi-flexible rod polymer family, this polymer captured the intense attention of the scientific community due to the rediscovery of high electrical conductivity. In present work we have prepared the polyaniline with the chemical method and done various characterization UV – vis, FTIR, and SEM. Thin film of polyaniline is prepared with the help of spin coater and determine the I-V characteristics and also …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 27–35 Read article
-
Solution Combustion Synthesis of Yttrium molybdate (Y6MoO12) Nanoparticles by using Peroxomolybdic Acid, Characterization and Applications
Abstract: The main aim of our present research work is to synthesize the distinct yttrium molybdate (Y6MoO12) nanoparticles with excellent photocatalytic activity through ultra-rapid solution combustion route using peroxomolybdic acid as molybdenum source for the first time. The morphology of Y6MoO12 nanoparticles studied using scanning electron microscopy (SEM) exposes that the particles are exceedingly porous and agglomerated. From BET surface area measurement, it is examined that Y6MoO12 nanoparticles exhibit relatively large …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 1, 2021 · pp. 1–12 Read article
-
Surface-Driven Microfluidic Flow of Dyed Water for Nano-Scale Application towards the Fabrication of Nanofluidic Sensors
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is fabricated by maskless lithography and indirect bonding technique. Dyed water is prepared and used as working liquid. A CMOS camera is used to record the surface-driven microfluidic flow of dyed water in the fabricated SU-8 device. Leakage-free surface-driven microfluidic flow of dyed water is recorded. Nanofluidics is the next level of fluid mechanics after microfluidics towards miniaturisation of …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 1, 2021 · pp. 19–22 Read article
-
New nanomagnetic bead dot ELISA immunoassay and its application to the detection of Giardial amblia copro antigen
Abstract: The discovery of vegetative forms or cysts of Giardia lamblia in the faeces of infected individuals is the conventional foundation of diagnosis. It has recently been used rather than techniques that rely on subjective microscopy of stool specimens of Giardia cysts, which can facilitate the diagnosis of Giardia lamblia in faecal specimens, with the advent of more objective techniques such as antigen detection, which can facilitate the diagnosis of Giardia …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 2, 2021 · pp. 34–38 Read article
-
Tribological Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites for Automobile Applications.
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with titanium carbide (TiC) particulates in the weight percent ranging from 3 wt.% to 15 wt.% in the steps of 3 wt.%. The dispersoid i.e. TiC particle size added varies between 100–200 µm. The resulting MMCs were solidified under the influence of copper chill of 25 mm thickness to study …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 24–46 Read article
-
An Introduction of Nanotechnology: Classification, Uses, and Applications of Nanomaterials
Abstract: Nanomaterials (NMs) have acquired noticeable quality in creative advancements due to their tuneable physical, synthetic, and organic qualities with improved performance over their mass counterparts. The order of the NMs is determined by their size, creation, form, and starting. The ability to predict the unique features of NMs increases the value of each order. Because of the increased growth of NM creation and their current uses, difficulties relating to harmfulness …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 2, 2021 · pp. 31–38 Read article
-
Potato Starch-Based Composites for Industrial Application
Abstract: Plastic has become an essential element in our daily life. Plastics derived from polyolefins such as polyethylene are currently used in plastic film for food wrapping, garbage bags, mulching, compost bags, and many more. These plastics are typically inactive and resistant to microbial attack and hence they remain in nature for a long time without any deformation and has a harmful effect on atmosphere. Biodegradable plastics can help solve this …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 1–12 Read article
-
The Potential Application of Walnut Shells as Biofillers for Natural Rubber Composites
Abstract: It was evaluated whether walnut shells should be used as filler in composites made of natural rubber. Samples of walnut shells were ground to fine powders, sieved through a 75 μm mesh, and were used in compounding natural rubber using varying filler loading of unfilled, 20 hpr, 30 hpr, 40 hpr, and 50 hpr. The physicochemical analysis results of the walnut shell powder were 5.30, 10.10%, 2.50%, 43.70%, 49.70 mg/g, …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 30–34 Read article
-
Synthesis and Characterization of Poly(vinylpyrrolidone) / Starch / Dimethylacrylamide Hydrogel by Gamma Radiation and Its Application in Basic Fuchsin and Methyl Orange Removal
Abstract: Gamma radiation was used to create a number of PVP/Starch/Dimethylacrylamide (PSD) based hydrogels. Investigated were the effects of several parameters, such as radiation dose, material composition, and pH, on the characteristics of hydrogels, such as gel content and swelling behavior. Radiation doses ranged from 10 to 25 kGy, and 10 kGy was determined to be the ideal dose. Investigations on the impact of dimethylacrylamide (DMA) composition on swelling were investigated. …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 1–20 Read article
-
Experimental Investigation on Mechanical Failure of Bio-Implant Material for Orthopedic Applications
Abstract: Loss of limbs or destruction of bones in accidents and battle requires partial or complete replacement of the damaged body parts and bones in particular for complete recovery. The materials which can be used as artificial bio-implants for the replacement must be bio-Integrable as well as biocompatible with the host human body and possess very high mechanical properties to withstand high wear and stresses involved in various joints. Existing research …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 1, 2020 · pp. 21–28 Read article
-
Application of Response Surface Method in Studying the Properties of Micro-plasma Arc Welded AISI 904L Super Austenitic Steel
Abstract: Super austenitic steels play a major role in fabrication of corrosion resistance components which are subjected to severe corrosion. In the present work, super austenitic steel AISI 904L of 0.4 mm thickness is butt welded using Micro Plasma Arc Welding. Welding input parameters like peak current, base current, pulse rate and pulse width are considered and output responses like fusion zone grain size, hardness and ultimate tensile strength of the …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 1–17 Read article
-
Application of hybrid RSM-GA technique in predicting optimum process parameters of biodiesel production from Karanja and Mahua oils
Abstract: The current work is focused on the maximization of biodiesel production from Karanja and Mahua oils. The design expert 6.0.8 tool is used for applying the RSM and half fraction with five input process parameters are entered in it. The ranges of all the process parameters are obtained from the literature review. The experiment design matrix is produced to conduct the experiments in order to get maximum biodiesel yield. The …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 1, 2023 · pp. 7–11 Read article
-
Research Insight: Highlights on CAM Applications in Production
Abstract: Most of the machines needed control systems for operating the machine. There are various control systems available, such as automatic control, computer control, manual control, and remote control. For the convenience of mass production, machines needed to repeat speed, automatic actions, and precise continuously. These machines may use mechanical, pneumatic and electrical systems to control. However, some changing procedures, fixed procedures, or tools may need a lot of time to …
Published in International Journal of Computer Aided Manufacturing · Vol. 1, Issue 1, 2016 · pp. 15–18 Read article
-
AI Techniques for Data Analytics and Data Science: Software Tools, Research Challenges, Applications: A Review
Abstract: Artificial intelligence is the branch of Computer Science in which multidisciplinary expertise is required and ultimately the main aim is to automate the activities of all human which require human intelligence. The main issue is to design or create machine that completely works like a human brain. Artificial Intelligence architecture focuses on evaluation and redesigns design process. Now days Data Science is most popular all around the world and is …
Published in International Journal of Computer Aided Manufacturing · Vol. 5, Issue 1, 2019 · pp. 9–17 Read article
-
Performance Assessment of Lightweight Cryptography in Image Processing for IoT/WSN Applications
Abstract: The Internet of Things (IoT) can serve as an interface to small processing tools for future technology.More communication data is required and safety of information can be dangerous. Pinnacles of dataand security of information can be a risk. This gadget is basically a small, low power consumption inthis engineering. Many encryption rounds are basically an abuse of the Gadget vitality criteria.Unrelenting calculation as it may require uprightness, conceivable compromise. It …
Published in International Journal of Computer Aided Manufacturing · Vol. 7, Issue 1, 2021 Read article
-
Application of Artificial Neuron Network in roughness prediction: A case study in turning of stainless steel
Abstract: - Artificial neural networks offer a practical and efficient way to choose the best machining parameters for the turning process in order to reduce surface roughness, the resulting cutting forces, and maximize tool life. Surface roughness is a significant aspect in the evaluation of cutting performance and plays a significant role in the manufacturing process. The goal of this project is to create a model based on an Artificial Neural …
Published in International Journal of Computer Aided Manufacturing · Vol. 8, Issue 1, 2022 · pp. 21–26 Read article
-
A Review on Computational Intelligence and its Applications
Abstract: Abstract:Computational intelligence (CI) is a term used to describe a computer's capacity to learn a particular task via data or experimental observation. Although it is frequently used as a synonym for soft computing, computational intelligence is still not well defined. Soft computing, commonly referred to as computational intelligence, is a type of computing that is based on how people learn. Computers become more intelligent when they learn from procedures based …
Published in International Journal of Computer Aided Manufacturing · Vol. 8, Issue 1, 2022 · pp. 27–30 Read article
-
Study of Thermal Stresses on Cast Iron and Aluminum Alloy V8 Cylinder Blocks for A Four Stroke CI Engine Without any Application of Cooling Systems
Abstract: The purpose of this paper is to investigate the thermal stresses experienced by a V8 cylinder block of a four stroke CI engine at a specific point in time during the engine's operation. Two case studies were performed for the cylinder block with different materials. Aluminum A356 T6 and Iron Cast are the materials used in these case studies for the cylinder block. Pressures and temperatures were applied only to …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 7, Issue 2, 2021 · pp. 6–19 Read article
-
STUDY DIESEL-RK APPLICATIONS IN THE COMPUTATION AND ANALYSIS OF TECHNOLOGICAL AND SOCIOECONOMIC CHARACTERISTICS OF DIESEL ENGINES USING HEAVY FUELS IN ORDER TO TEST WITH DIFFERENT PISTON BOWL DESIGNS
Abstract: The influence of different piston bowls on the Diesel-RK will be demonstrated in this test as the engine is the heart of vehicles for existence like human heart needed for survival. The piston bowl shows a significant influence on the load stratification in the transition area. The compression ratio shows a trade-off of NOx reduction with unburned hydrocarbons and carbon monoxide emissions. In today's society, people have attempted to employ …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 8, Issue 2, 2022 · pp. 8–18 Read article