Search
242 articles for “Solidity”
-
Sustainable Approach of Solid Waste Management Strategies - A Case study of Aurangabad
Abstract: ‘Change’ a phenomenon of transition that takes place anywhere, anytime and in anything. May that be for systems, lifestyles, process, climate, weather, environment, population, pollution, technologies, techniques, etc. this change is turning into challenges and has become a hustle for every living finding out alternative and solution for the same. Due to the development and increase in industrialization, urbanization, population, pollution, economy, etc. one of the major challenges rising up …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 1, 2022 · pp. 26–36 Read article
-
From Fireworks to Rocket Fuel: What to Understand from Solid Propellants
Abstract: Solid propellants are high-energy materials that are used to propel and thrust missile systems and rockets. Despite the fact that they have a long history dating back to the employment of black powder over two millennia, performance gains expectations and the requirement for" insensitive weapons" that are resilient to unintentional ignition have motivated much study and development in the last half-century subjecting to the formation of SRMs engines (main combustion …
Published in International Journal of Applied Nanotechnology · Vol. 9, Issue 1, 2023 · pp. 1–12 Read article
-
Review Paper on Thermal Analysis of Non-Vented (solid) Disc Brake using Ansys Software
Abstract: The disc brakes are exposed to large thermal stresses and heat during routine braking. The extraordinary thermal stresses, tremendous heat occurred in the disc during hard braking. The aim of the project or research work is to design and analysis of disc. The modelling or design of the disc is done using solid works software. The Thermal analysis is to be done on the Non-vented disc brakes using ANSYS software …
Published in International Journal of Computer Aided Manufacturing · Vol. 1, Issue 1, 2016 · pp. 01–06 Read article
-
Design and Analysis of Optical Parameters of Hybrid Solid Core PCF
Abstract: In this paper, a solid hybrid PCF with non-uniform size air holes is presented at the cladding area. The innermost cladding area is star shape of circular air holes, and the outer four layers are taken 2.8 µm for numerical analysis. Then the size of the outer four layers is taken to 2.5 µm, 2.2 µm, 2 µm and 1.7 µm for various parameter investigations. The proposed structure has a …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 2, 2020 · pp. 37–48 Read article
-
Mass Production and Isolation of Trichoderma harzianum from Different Media Using Liquid and Solid Fermentation Technique and Evolution against Fusarium oxysporum
Abstract: Mycelial growth conidal production and biomass yield of trichoderma species (Trichoderma harzianum) were examined on different culture media including potato dextrose media, waksman media, soyabean meal media, glucose peptone media, jaggery media, malt extract media, cornmeal media, czepaks media. A big factor in growth rate was the medium. The optimum medium in terms of growth spore generation and biomass output was soyabean meal media. For mycelial growth, biomass output, and …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 1, 2022 · pp. 27–37 Read article
-
Impact of Solid Waste Disposal on Soil Physicochemical Parameters and Selected Enzyme Activities: A Case Study from Nekede Dumpsite, Nigeria
Abstract: This study assessed the influence of solid waste disposal on soil physicochemical parameters in Nekede dumpsite Owerri, Imo state Nigeria. The study area is a solid waste dumpsite located between latitude 5° 25' 59.99"N and longitude 7°01'60.00"E DMS coordinates along No. 1 old Nekede road and beside the Otamiri river. The study area was partitioned into four (4) quadrants while facing the river with samples collected at three (3) different …
Published in International Journal of Environmental Chemistry · Vol. 9, Issue 2, 2023 · pp. 40–49 Read article
-
Solid Slab Railway Bridge
Abstract: Different types of railway bridges are employed based on the span and width requirements. For smaller spans, solid slab bridges are utilized. In cases where a larger span is necessary, steel girder bridges become the preferred choice. When dealing with a wider river, trussed-type bridges are employed for railway applications. In trussed-type steel railway bridges, half of the load is supported by the trussed members, with only the remaining half …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 9, Issue 2, 2023 · pp. 1–7 Read article
-
Mathematical Models and Forecast of Effect of Flow Rate on Turbidity and Total Suspended Solids Within Water Bearing Aquifer
Abstract: The aim of study is to develop mathematical models to predict turbidity and total suspended solids upon the influences of recharge and flow rate as a functional parameter in distribution interaction of water parameters within the water bearing aquifer taking a main well A as dispersing point to other wells. Predictive models have been generated to account for the effect of flow rate on turbidity and total suspended solids within …
Published in International Journal of Water Resources Engineering · Vol. 4, Issue 1, 2018 · pp. 52–60 Read article
-
A Case of Agra City: Solid Waste Management in Tier II Indian Cities
Abstract: In India urban population is increasing day by day due to which unhealthy and unhygienic living conditions causes’ environmental degradation. Agra is one of the Jem for India, as it’s a city of Tajmahal; but day by day solid waste management creating huge problems and making city worst. This paper is all about how Agra is depleting day by day and what precautions we need to take up.
Published in International Journal of Town Planning and Management · Vol. 2, Issue 2, 2016 · pp. 28–31 Read article
-
Application of a graphene oxide for determination of Cadmium, Lead, Copper and Zinc ions at trace level in personal Care Products using Solid Phase Extraction
Abstract: A novel and simple procedure Solid Phase µ-extraction was successfully used as a sample preparation method for the pre concentration and determination of Cd, Pb, Cu, and Zn in different personal care products samples. In the first screening, a five variables were selected with low (-) and high level (+) and were inspected by Plackett–Burman. In order to further optimization, a central 23 +star orthogonal composite design (CCD) was applied …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 1, 2020 · pp. 14–23 Read article
-
Production of Waste Animal Bone as a Heterogeneous Solid Base Catalyst for Transesterification of Jatropha Oil
Abstract: Heterogeneous catalyst plays a vital role in transesterification process, especially in view of cost and reusability. In this study, heterogeneous solid base catalyst was prepared by impregnating the waste animal bone with different weight percent (wt%) KOH solution followed by drying and calcination at 900 °C for 3 hr. Having screened the catalytic performance and basicity of animal bone loaded with different K-compounds, 12 wt% KOH loaded on animal bone …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 28–48 Read article
-
Study of the energy utilisation characteristics of solid state hydrogen storage and recovery systems
Abstract: The energy usage patterns during solid state hydrogen storage and retrieval on commercially available hydride forming alloys have been examined in this work through thermodynamic model based calculations, considering the entire storage and recovery system. It is calculated that energy (mechanical and thermal) equivalent to about 16 to 30% of the stored hydrogen energy is involved in the hydriding step, while 9 to 40% of the stored hydrogen energy equivalent …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 1, 2020 · pp. 51–61 Read article
-
Composting of Municipal Solid Waste to Enhance the Fertility of Soil
Abstract: Composting has been used as a method of utilisation organic matter into the soil to boost soil structure and fertility. The composting method has received abundant attention in recent years due to pollution issues and also the seek for environmentally sound strategies for treating waste. Waste volumes still rise, that ends up in loss of resources and inflated environmental risks. Open selling and landfill could be a major technique for …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 2, 2020 · pp. 16–21 Read article
-
Solid Waste Management by adopting Incineration
Abstract: Incineration has been employed extensively for waste disposal, involving household, harmful, and medical waste but there is escalating public concern over the advantages of combusting the waste against the health risk from pollutants produced in combustion. Waste Incineration and Public Health advises the rising debate with the latest information accessible on incineration, pollution, and human health alongside with expert conclusions and commendations for advance research and enhancement of such areas …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 1, 2021 · pp. 13–25 Read article
-
A Review of Recent Developments in Solid State-Based Metal Additive Manufacturing: Friction Stir Additive Technique
Abstract: In the age of machines, the whole industry needs light-weight and high strength for lighter devices, machines, etc. The core aerospace industry needs lighter materials for satellites and rockets. Friction Stir Additive Technology (FSAT)represents an innovative approach aimed at leveraging the principles of layered build (AM) layer by layer using solid state (FSW) friction stir welding technology. These represent a particular class of friction-based additive technology (FAT) and can easily …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 2, 2022 · pp. 17–25 Read article
-
Synthesis, Characterization and Photoconductive Properties of Antimony Selenium Iodide
Abstract: A shiny needle-shaped polycrystalline chalcogenide compound, SbSeI, was synthesized through a solid-state thermal reaction by combining the constituent elements in a stoichiometric ratio within an evacuated quartz tube at 585°C for 3.5 hours. The resulting compound was characterized using SEM, EDAX, and XRD techniques to confirm its structure and composition. The resistance versus temperature curve revealed the semiconducting nature of the material with a resistivity of 3.5 x 10⁷ Ω-cm …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 10, Issue 1, 2025 · pp. 1–8 Read article
-
INVESTIGATE THE BULGING EFFECT OF METALLIC SOLID CYLINDER UNDER COLD UPSETTING USING FINITE ELEMENT ANALYSIS
Abstract: Friction is an integral part of metalworking and manufacturing processes due to the relative motion and forces continually acting on tools, dies, and workpieces. Friction both raises the effort and consumes energy. However, measuring friction is not straightforward and cannot be considered an independent parameter. In many metal-forming procedures, the impact of friction is just as crucial as other quantifiable factors. Various methods have been used to estimate friction, assuming …
Published in International Journal of Computer Aided Manufacturing · Vol. 8, Issue 2, 2022 · pp. 7–18 Read article
-
End HIV/AIDS by 2030—Universal Preparedness, Global Solidarity, Shared Responsibility
Abstract: Human immunodeficiency virus / acquired immune deficiency syndrome (HIV/AIDS) is a chronic, lethal and hopeless condition that arouse due to disruption of immune system. According to National Health Policy -2015, growth of HIV/AIDS should have been zero by 2007, but our system has failed drastically in achieving it. Now, as we are in the last decade of fight against HIV/AIDS as per declaration by the United Nations, we have plans, …
Published in International journal of Nursing Science Practice and Research · Vol. 7, Issue 2, 2021 · pp. 1–4 Read article
-
Wettability of carbon fibers with resin matrices from dynamic contact angle measurements
Abstract: Wettability is the property that quantifies the propensity of a solid surface (carbon fiber) to be covered by a liquid (resin). For a wettable solid, the solid-liquid contact is favoured and as a result the liquid spreads on such surface of the solid. Spreading of the liquid on the solid surface is primarily driven by the adhesive forces between the liquid and the solid, while the inter molecular cohesive forces …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 Read article
-
TO IMPROVE THE EFFICIENCY OF SILICA FUME CONCRETE
Abstract: A suitable introduction of silica fume in concrete improves both the mechanical and chemical properties of the concrete. The long-live compressive strength of silica-fume concrete has been recently questioned by some researchers and they were regular in touch of it.This paper reports the results of compressive strength data on strength of silica which is on 4- to 6-year-old cores attained from well-documented field experiments which where both silica-fume and non-silica …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 39–44 Read article