Search
43 articles for “FTIR Spectroscopy”
-
Synthesis of Nano-ZnO by Chemical Method and its Characterization
Abstract: Nanocrystals of ZnO were prepared by chemical method using Zn (II) acetate and potassium hydroxide as the starting materials and methanol as solvent. The material was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), electron diffraction analysis (EDS), UV-Visible spectroscopy, Dynamic light scatteringanalysis (DLS) and Fourier transform spectroscopy (FTIR) techniques. The results indicated that the obtained ZnO material was in nano-dimension and possessed pure …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 8, Issue 1, 2022 · pp. 13–18 Read article
-
Characterization and Kinetic Study of Sugarcane Bagasse for the Production of Bio-oil Over Monodispersed Fe2 O3 and ZSM-5 Composite
Abstract: The shortage and price scramble of fossil fuels accompanied by vast CO2 emissions have triggered a worldwide search for alternative and sustainable resources. Wind, solar, geothermal, biomass, and water are the most commonly used alternative energy sources. The biomass residues are typically at low cost and readily availabile, and has been used as feedstocks for synthesis of renewable energy. To produced the bio-fuels from biomass residues, several reaction pathways categorized …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 9, Issue 2, 2023 · pp. 1–13 Read article
-
Synthesis and Characterization of Magnetite-Pectin-Alginate Hybrid and Bionanocomposite
Abstract: It is a one pot synthesis of hybrid bionanocomposite comprising of inorganic magnetite with stabilizer biopolymer pectin and alginate in co-precipitation method using sodium hydroxide and ammonium hydroxide as precipitating agents. A lot of comparison and investigation has been done in particle size of nanocomposite by changing the stoichiometric ratio of both magnetite and biopolymer concentration and drying condition of composite. The nanocomposite has been characterized using infrared spectroscopy (FTIR), …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 1, 2017 · pp. 18–22 Read article
-
Bio synthesis and characterization of Gold Nanoparticles
Abstract: Colloidal Gold has attained much attention in global nanotechnology market due to valuable application in biomedical, electronics and other field as well as are being widely used as Antimicrobial agents. In this research work Gold nanoparticle suspension has been synthesized by bio synthesis method using bamboo leaves and formation of colloidal gold has been confirmed by different characterization techniques UV visible spectroscopy, FTIR and DLS. Keywords: Nanotechnology, gold Nanoparticle UV …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 2, 2018 · pp. 15–20 Read article
-
Formulation and Characterization of Polyhydroxyalkanoates Copolymer Nanoparticles for Controlled Drug Release
Abstract: The present study was focused on the formulation of polyhydroxyalkanoates copolymer nanoparticles (PHANPs) for in vitro controlled release of the drugs, viz. levofloxacin and amoxicillin. The PHANPs were synthesized by a triple emulsion method and conjugated with amoxicillin and levofloxacin to improve its remedial bioavailability. The PHANPs and drug conjugatedPHANPs were analysed using Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy and X-Ray Diffraction (XRD). The cell viability % …
Published in International journal of Nanobiotechnology · Vol. 6, Issue 2, 2020 · pp. 1–11 Read article
-
Synthesis and Characterization of Cesium Intercalated Graphene Thin Film
Abstract: Graphene Oxide (GO) becomes promising two-Dimensional (2D) material in optoelectronics due to its sparkling properties. In preparation step we used Carboxylation of graphene and vacuum filtration to create the free standing thin film of cesium (Cs) intercalated GO. In this work we have synthesized cesium (Cs) intercalated GO thin films at different concentration (0.03, 0.05, 0.1 mol %) by using vacuum filtration method. The functional group present in synthesized thin …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 4, Issue 1, 2018 · pp. 8–16 Read article
-
Thermal and structural properties of surface treated ragweed fiber reinforced biodegradable polylactic acid biocomposites
Abstract: Natural fiber-reinforced composites (NFRC) are becoming more popular as technological advance recognizes the need for eco-friendly materials. This work presents Giant ragweed (Ambrosia trifida) as a new composite reinforcement material into polylactic acid (PLA) matrix to form novel natural fiber-reinforced composites. Different types of retting techniques are utilized, and hydrogen peroxide retting is proven to provide the most optimized properties. The fibers are taken through subsequent extraction and grinding processes. …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 13–31 Read article
-
Kinetic Modeling and Thermodynamic Study of the Simultaneous Adsorption of Polycyclic Aromatic Hydrocarbons (PAHs) Onto Organomontmorillonite in Aqueous Medium
Abstract: Water is a vital source of human life, but it has frequently been polluted by mono and polycyclic aromatic hydrocarbons, usually from petrochemicals in petroleum industrial effluents as well as other anthropogenic activities. This study investigate the potential of montmorillonite intercalated HDTMAand TMPA cations for effective removal of five (5) different polycyclic aromatic hydrocarbons (PAH) namely: naphthalene, anthracene, chrysene,benzo(a)pyrene and benzo(g,h,i) perylene in aqueous medium. To research PAH adsorption behaviour …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 28–38 Read article
-
Green Synthesis of Zinc Oxide (ZnO) Nanoparticles using Urtica dioica Plant Leaf Extract
Abstract: The green synthesis of nanoparticles by biological systems, particularly plant extracts, has become an emerging area of nanotechnologies. Nano materials have wide range application in various fields such as electronics, optics, material science and bio medical science due to their size and morphology. Zinc oxide is a versatile semiconductors material and has attractive properties like wideband gap (3.2eV) large exciton biding energy, high stability and environmental friendly material. The synthesis …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 44–57 Read article
-
Modification of Solar Hot Water Heating System
Abstract: In optoelectronics system, the copper sulfide powder plays an important role as a thin film layer. This paper covers fabrication of Copper sulfide (CuS) Powder and its characterization. The fabricated Copper sulfide powder gives better result as compared to commonly used Copper sulfide (CuS) available in the market. In this experiment, the Copper sulfide powder (CuS) was coated on the tubes as a thin film and measured the outlet water …
Published in International Journal of Water Resources Engineering · Vol. 9, Issue 1, 2023 · pp. 33–39 Read article
-
To study the Properties of Bio Synthesized Silver Nanoparticles
Abstract: Recently colloids silver nanoparticles have attained much attention in global nanotechnology market due to valuable application for catalytic, biomedical, electronics and widely as Antimicrobial agents. In the present work author have synthesized and characterized the Colloids silver nanoparticles with three biosynthesis methods and the detail characterization of particle has been done by UV–Visible spectroscopy, AFM, FTIR, and with DLS techniques. Particles formation was conformed from UV spectra of nanoparticles. Size …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 1, 2018 · pp. 34–40 Read article
-
Synthesis and Characterization of Poly(vinylpyrrolidone) / Starch / Dimethylacrylamide Hydrogel by Gamma Radiation and Its Application in Basic Fuchsin and Methyl Orange Removal
Abstract: Gamma radiation was used to create a number of PVP/Starch/Dimethylacrylamide (PSD) based hydrogels. Investigated were the effects of several parameters, such as radiation dose, material composition, and pH, on the characteristics of hydrogels, such as gel content and swelling behavior. Radiation doses ranged from 10 to 25 kGy, and 10 kGy was determined to be the ideal dose. Investigations on the impact of dimethylacrylamide (DMA) composition on swelling were investigated. …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 1–20 Read article
-
Cassia Fistula Leaf and Flower Extract and their Antibacterial Activity: A Comparative Study
Abstract: Overwhelming side effects of synthetic drugs has attracted researchers for the search and use of herbal drugs. Neem and Curcumin are very widely studied and research is still going on these species. However, Cassia Fistula, is one such plant which has various medicinal values and is less studied. Thus, the present investigation studies the extraction of leaf and flower constituents and the extract has been characterized by FTIR and NMR …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 1, 2019 · pp. 1–10 Read article
-
Advance in the Synthesis of Oxadiazole Based Heterocyclic Compound
Abstract: The five members of the heterocyclic ring 1,3,4-oxadiazole are necessary for the production of strong bioactive molecules. Numerous pharmacological effects, including anti-inflammatory, antibacterial, anticancer, antitubercular, anticonvulsant, anti-HIV, hypoglycemic, and antioxidant qualities, are exhibited by this intriguing class of chemicals. We have created four novel 1,3,4-oxadiazole compounds in the continuing study, which are sourced from the NSAID Ibuprofen. Melting point analysis and TLC were used to verify the compounds' purity. Open …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 9, Issue 2, 2023 · pp. 10–15 Read article
-
Synthesis & Characterization of Fe3O4 Nanoparticles for Thermal Sensing Application
Abstract: n this work, Synthesis and characterization of magnetite (Fe3O4) nanoparticles by the co-precipitation method has been done. These nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), UV-Visible spectroscopy (UV) and Thermogravimetry analysis (TGA/DSC). SEM image show morphology and porosity of material. The nanoparticles show quasi-spherical morphology with mean size around 37 nm. The XRD and FTIR confirmed the functionalization of the Fe3O4 nanoparticles. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 10–19 Read article
-
Pyrolysis Characteristics and Isoconversional kinetics of kusum deoiled seedcake.
Abstract: The pyrolysis characteristics and kinetics of kusum de-oiled seed cake were conducted using a Thermo gravimetric analyzer. Thermogravimetric analysis of biomass was carried out at three different heating rates of 10, 20, 30, ̊ C/min from 28 ̊ C to 1000 ̊ C under N2 atmosphere. The results indicated that the biomass was decomposed in the temperature range of 270 ̊C to 520 ̊ C and further decreased when temperature …
Published in International Journal of Environmental Chemistry · Vol. 2, Issue 2, 2016 · pp. 9–17 Read article
-
Execution of Poly Coatings and Corrosion of Copper
Abstract: The erosion defensive poly(aniline-co-o-toluidine) (PAOT) coatings were integrated on copper (Cu) by the electrochemical copolymerization of aniline with o-toluidine under cyclic voltammetry conditions. Fluid oxalate arrangements were utilized as the supporting electrolytes for the amalgamation of PAOT coatings on Cu. The FTIR and 1H NMR spectroscopy examines uncover that the copolymerization of aniline and o-toluidine happens on Cu substrates from a fluid oxalate arrangements and bringing about PAOT copolymer, there …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 2, 2015 Read article
-
Synthesis and Evaluation of Antifungal Properties of 2-((4-((6phenylimidazo[2,1-b][1,3,4]thiadiazole-2-yl)methoxy)phenoxy)methyl)-6-phenylimidazo[2,1-b][1,3,4] thiadiazole Derived from Hydroquinone
Abstract: Thiadiazole, a heterocyclic core, has garnered significant interest from chemists seeking novel therapeutic agents. The synthetic route for the target compounds is depicted in Scheme 1. The compounds were synthesized with favorable yields through the condensation of hydroquinone with various organic reagents. They underwent physical characterization and were analyzed using spectroscopic methods, including infrared (FTIR) and NMR (1H, 13C) spectroscopy. The FT-IR spectrum of the product exhibited a ν(C=N) absorption …
Published in International Journal of Environmental Chemistry · Vol. 12, Issue 1, 2026 · pp. 76–82 Read article
-
An Analytical Study of Structural Optical Properties of CaAl2O4 Phosphors by Sol–Gel Method
Abstract: A comparative study of structure, morphology and optical properties of CaAl2O4 Phosphors by In this paper, monoclinic CaAl2O4 phosphor with various weight rate of aluminum was blended by low temperature sol–gel technique. The readied tests were described by X-beam diffraction (XRD) examination, Fourier change infrared (FTIR), checking electron microscopy (SEM), vitality dispersive spectroscopy (EDS) and photoluminescence discharge spectra (PL). The XRD examination demonstrated that CaAl2O4 have monoclinic structure. The normal …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 1, 2016 · pp. 1–4 Read article
-
Evaluation of Antimicrobial Efficacy of Silver Nanoparticles Synthesized from Punica gratum Extracts
Abstract: Nanotechnology is a branch of science which has open many routes of technologies. With the rapid development of nanotechnology, application has been extended further and now silver is the engineered nanomaterial most commonly used in consumer products. Green nanotechnology is an area with significant focus at present on the important objective of facilitating the manufacture of nanotechnology-based products that are eco-friendly and safer for all beings, with sustainable commercial viability. …
Published in International Journal of Plant Biotechnology · Vol. 2, Issue 1, 2016 · pp. 1–9 Read article