All articles
7057 articles
-
Biokinetic Model of Crude Oil degradation: The Integration of Moringa-Alcohol-Water Root Extracts
Abstract: Mathematical model was developed to study the crude oil degradation on the effect of moringa-alcohol-water root extracts. In different soils environment of Niger Delta area of Nigeria. The mass of moringa in alcohol and water used for this research work is 500g and 600g. In all cases the decrease with increase in the period of exposure (Time) for remediation of the contaminated soil types studied for the first order rate …
Published in International Journal of Environmental Chemistry · Vol. 6, Issue 2, 2020 · pp. 1–12 Read article
-
MANUFACTURING AND TESTING OF CNT BLENDED NAVAL BRASS
Abstract: The Utilization of advanced technologies increased the scope of producing new materials drastically .as a result wide spectrum of nanomaterials are being produced these materials are manufactured as per the desired properties in the final material /composite. The aim of this study is to investigate the effect of CNT (Carbon Nano Tubes) reinforcement into naval brass (Cu-CNT 60%, Zinc 39%, and Tin 1%) naval brass is widely applied in the …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 7–11 Read article
-
Recent Trends and Challenges of Lithium Sulphur Batteries
Abstract: Lithium-ion (Li-ion) batteries that are currently available in market have certain limitations due to their low energy density and do not meet the growing demands of the energy storage market. Thus, the building next-generation rechargeable Li and Li-ion batteries with the higher energy densities, better safety characteristic, lower cost and longer cycle life is vibrant to overcome the challenges of fast depleting conventional energy resources. To achieve smaller and lighter …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 1–6 Read article
-
Study of the effect of Silicon oxide nanoparticles in the copper alloy
Abstract: The main objective of this paper is to study the effect of the Silicon oxide nano particles in the copper alloy which is manufactured by using the stir casting process and samples are prepared as per the ASTM standards. These specimens are tested under the mechanical tests. Due to blending of the nanoparticles the properties of copper alloy will be enhanced. so uniform ASTM samples with varying composition of nano …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 24–31 Read article
-
MWCNT AND GRAPHENE FOR IMPROVED CORROSION RESISTANCE OF MILD STEEL
Abstract: ABSTRACTThe protective coating method is a passive corrosion protection technique. The protective coating detaches the metallic surfaces from the aggressive media, such as moisture, salts, acids etc. Nanotechnology is a relatively modern development in scientific research, the development of this concept occurred over a very short period of time. One technique that has recently been used to increase the adhesive and anti-corrosive properties of polymer coatings is the addition of …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 12–17 Read article
-
Study of Microstructure and corrosion effects of precipitation hardened high strength AA-7xxx aluminium alloy subjected to cryo rolling
Abstract: The strength and life of an alloy is the primary parameter taken into consideration while building hulls and superstructures for marine applications. Usually AA-7xxx is widely used for these applications and hence is chosen for the present investigation. Cast AA-7xxx alloy reveals distribution of soluble intermetallic compounds in the α-aluminium matrix. In order to improve the mechanical properties and condition the microstructural features, precipitation hardening (solutionizing and ageing) treatment was …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 18–23 Read article
-
Effect of impurity metal (Fe, Co, Ni) on WSex as good hydrogen evolution catalyst
Abstract: Transition metal chalcogenides are recognized as a category of very promising non-expensive and earth-abundant catalysts for Hydrogen evolution reaction (HER) catalysts. Many literature reports appeared recently on metal selenides due to excellent phyco-chemical properties and for HER, this mini review attempt to give some insight on effect of Fe, Co, Ni to WSex toward efficiency of HER. From the literature report showed that presence of impurities activity with WSex following …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 31–36 Read article
-
A Technological overview of Improvised Energetic Materials: Characteristics, Post-blast residues and Detection methodologies.
Abstract: In the prevailing world, among the many tools of terrorists, explosives are the most potent and popular. Technological developments and the easy availability of information exhibit rapid transformation from the dependence on conventional explosive devices to the designing of improvised chemical devices. The security forces and the law enforcement agencies find it difficult to counter the Improvised Explosive Devices (IED) menace without a complete and detailed knowledge about their characteristics …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 1–17 Read article
-
Comparative Study of Oil Palm Fibre for Effective Remediation of Crude Oil in a Contaminated Soil
Abstract: Comparative study was conducted on two different oil palm fibre effectiveness on degradation of crude oil contaminated loamy soil. The method of X-ray fluorescence spectrometer (GC) was applied for crude oil analysis as well as the different samples of oil palm fibres, which was classified as Elaeis Guineeensis and Tekena Species was analyzed to determine the possible elements present in the specimen and the result obtained identified, Mg, P, Si, …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 25–30 Read article
-
Study on Metal Corrosion in Soil Environment of Edo State in Niger Delta Area, Nigeria
Abstract: Impact of sandy soil obtained in Edo State on metal corrosion was investigated having in mind that corrosion of metal is an issue of concern as well as has been a major problem in various fields of engineering operation, particularly in environment of Niger Delta area of Nigeria. Experimental approaches were conducted to examine metal corrosion in soil of selected environment of Edo State in Niger Delta area of Nigeria. …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 37–48 Read article
-
Advancement of Nanotechnology in Batteries
Abstract: As energy source used by most devices such as smart phones, cameras or computers are Lithium batteries, they are becoming the indistinguishable feature of everyday modern civilization. The higher power efficiency was most appealing attribute when opposed to certain redox power devices. It gives rise for significant concern well into the production of hybrid lithium ion batteries for electric automobiles. At higher density lithium constitutes its ideal anode element in …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 18–24 Read article
-
Agrochemicals and Human Health: A Review
Abstract: The chemicals used for the management of ecosystem of agriculture ae said to be the agrochemicals. The fertilizers utilized for crop yield; chemical agents designed to change the pH of soil (acidifying agents); chemicals used as the soil conditioners; chemicals used for killing the pests of field crops; chemicals used in the raising of livestock (Examples: antibiotics and hormones) such and other chemicals constitute the agrochemicals. The modern practices for …
Published in International Journal of Agrochemistry · Vol. 6, Issue 2, 2020 · pp. 1–11 Read article
-
Influence of Contaminants on Ground Water and Associated Health Risk
Abstract: Due to the demand for safe water, groundwater quality which relates closely to human health has become as important as its quantity. Any place where surface water makes its way into ground water, organic chemicals and pathogens potentially can enter. Natural sources or numerous types of human activities can contaminate the ground water. Due to anthropogenic activities, like mining, and open dumping of industrial and domestic wastes which lead to …
Published in International Journal of Agrochemistry · Vol. 6, Issue 2, 2020 · pp. 49–63 Read article
-
Fate and Distribution of Pesticides Residues in Water Sources in Nigeria: A Review
Abstract: The availability of safe and clean water access is very important for a healthy population. In this study, we reviewed the distribution of organochlorine and organophosphorus pesticides in water sources in Nigeria. The reviewed studies showed that OCPs and OPs concentration in Nigerian surface water and sediments are high and at present the use of organochlorines and organophosphorous synthetic pesticide in agricultural and industrial sectors has created as a significant …
Published in International Journal of Agrochemistry · Vol. 6, Issue 2, 2020 · pp. 29–48 Read article
-
Agronomy of Food Technology
Abstract: This article summarizes some formatives over composes from agri-food in nano technological issues. Agri-food provisioned sustainable development of agriculture systems from views of nanotechnology. Reduction in crop uncertainty and management strategies are alternative to conventional technologies. Applications of nanotechnology in agriculture include delivery of agrochemicals and nutrition, pesticides, and subjectively detecting chemicals as nano-in-sensing arrange or detection of nutrient deficiencies. Potential benefits of nanotechnology have applied for agriculture; food, fisheries, …
Published in International Journal of Agrochemistry · Vol. 6, Issue 2, 2020 · pp. 12–21 Read article
-
DESIGN AND IMPLEMENTATION OF A SMART FARM MANAGEMENT SYSTEM
Abstract: Agriculture is a sector of a very high importance and should be given attention because it does not only make means of living, the provision of food to sustain and also contribute to economical and national development. Although, the output produced by farmers is high in our country, Nigeria, farmers are still confronted with a couple of problems such as poor irrigation and water management system, poor record of Agricultural …
Published in International Journal of Agrochemistry · Vol. 6, Issue 2, 2020 · pp. 22–28 Read article
-
Magnification of the Mechanism of Enzyme Catalyzed Reaction through Geometric Model
Abstract: The geometric model is dealing with correlation between the “five events for enzyme catalyzed reaction” and “triple point event serving groups on the circle” in triangle obtained for thegraphical presentation of the double reciprocal (1÷S versus 1÷V) for magnification of the mechanism of enzyme catalyzed reaction. This model is based on the nine point circle in triangle of the double reciprocal plot. The five significant points resulted for the circle …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 6, Issue 2, 2020 · pp. 1–25 Read article
-
Synthesis, characterization of Schiff base and its pH metrically studies of transition metal complexes of N'-(3, 4-dihydroxybenzylidene) isonicotinohydrazide.
Abstract: Schiff reaction is one of the versatile reaction widely used in organic synthesis focused on the discovery & development of isoniazide Schiff base derivative N’(3,4-Dihydroxy benzylidene isonicotinohydrazide) have been reported in presence of 0.01g molecular iodine catalyst stirring give fast product & good yield. The synthesized compound is characterized by FTIR & H-NMR analysis. For the development of coordination chemistry Schiff base & metal ion having played most important role, …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 6, Issue 2, 2020 · pp. 39–47 Read article
-
The Improvement of Polyvinyl Chloride Synthesis Using Different Approaches
Abstract: Polyvinyl chloride (PVC) is produced by the polymerization of the vinyl chloride monomer either by direct chlorination of olefins or by addition of hydrogen chloride to acetylene. The polymerization conditions are: heat, peroxides or oxidizing agents with basic structure as -CH2CHCl.CHCl-CH2.CHCl-. Polyvinyl chloride is a thermoplastic and its plasticity can be increased by incorporating ‘plasticizers’ of relatively low molecular weight organic materials during molding or extrusion. PVC has high hardness …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 6, Issue 2, 2020 · pp. 48–52 Read article
-
Overview on the Synthesis and Characteristics of Polystyrene
Abstract: Polystyrene, a synthetic aromatic polymer, is one of the most wide spread polymers in the world. The monomer is styrene (vinylbenzene)- a petroleum based liquid hydrocarbon. Polystyrene can be solid or foamed. It was first discovered by a German apothecary Edmon Simon as far back as in 1839 from the resin of Turkish sweet gum trees. Polystyrene is formed by a polymerization method known as chain growth. Physically, it is …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 6, Issue 2, 2020 · pp. 26–30 Read article