Search
1495 articles for “work”
-
Surface-Driven Microfluidic Flow of Dyed Water for Nano-Scale Application towards the Fabrication of Nanofluidic Sensors
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is fabricated by maskless lithography and indirect bonding technique. Dyed water is prepared and used as working liquid. A CMOS camera is used to record the surface-driven microfluidic flow of dyed water in the fabricated SU-8 device. Leakage-free surface-driven microfluidic flow of dyed water is recorded. Nanofluidics is the next level of fluid mechanics after microfluidics towards miniaturisation of …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 1, 2021 · pp. 19–22 Read article
-
Mercerization and Mechanical Properties of Natural Fibre Reinforced Composite: A Comprehensive Review
Abstract: Growing public concern about environmental issues has prompted the production of renewable, economical, and ecologically friendly materials. Thus a shift from synthetic fiber reinforced composites to natural fiber reinforced composites can be seen. Since Fibre reinforcement is deciding factors in the Structural properties of any engineered composite. But poor interfacial adhesion of fibre matrix obstruct it's potential while using in structural applications. Different studies suggested that the surface modification techniques …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 1–8 Read article
-
Analyzing the Effect of Rice Husk Ash & Quartz Powder on Mechanical Properties of Polypropylene Fiber Based Concrete Using Regression Analysis
Abstract: Several works were identified with sustainable development have uplifted the improvement of composite binders incorporating Portland cement, industrial, agricultural by- products and partial substitutions to aggregates. One of the most adverse effects of using cement is the emission of CO2 into atmosphere during production and it can be reduced with the effective use of cementitious materials. Several efforts were attempted to make use of supplementary cementitious materials to enhance the …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 51–57 Read article
-
Review on the Capillary Flow Characteristics in Polymer based Microfluidic Systems
Abstract: In this review different effects to control the surface-driven capillary flow in polymer based microfluidic systems. Author has used the polymers like polyimide, SU-8 and polymethylmethacrylate (PMMA) to fabricate the polymer based microfluidic systems. Author has studied the individual effects of surface wettability, surface free energy, surface chemistry, surface topography, channel aspect ratio, capillary pressure, kinetic energy, centrifugal force, surface area to volume ratio, microfluidic friction, liquid viscosity and effective …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 1, 2018 · pp. 28–33 Read article
-
Short Report on the Effect of Atmospheric Dielectric Barrier Discharge Plasma Processing to Control the Capillary Flow in Polymer based Microfluidic Devices
Abstract: In this experimental work, a couple of microfluidic devices are fabricated by polymethylmethacrylate (PMMA) using the maskless lithography, hot embossing lithography and direct bonding technique. One device is fabricated by pristine PMMA, and the other device is fabricated by dielectric barrier discharge (DBD) plasma processed PMMA. Dyed water is selected and prepared as working liquid. Each surface-driven capillary flow of dyed water is recorded by a CMOS camera. This work …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 2, 2020 · pp. 1–4 Read article
-
Short Report on the Polymer based Microfluidic Device Fabricated by Lithographic Techniques
Abstract: In this experimental work, a single microfluidic device is fabricated by maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory. Microchannel bend is the selected design to fabricate the microfluidic device. Dyed ethanol is selected and prepared as working liquid. The surface-driven capillary flow of dyed ethanol is recorded in the fabricated microchannel bend using a CMOS camera inside the materials-science laboratory. Effect of centrifugal force …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 2, 2020 · pp. 17–20 Read article
-
Design and Analysis of Ergonomic Transport Friendly Collapsible Executive Office Chair
Abstract: Now a day’s office chairs are frequently used in all IT companies and industries. They are more in demand products of office furniture but are specifically designed for use in indoor workstation (or work area). It is difficult to transport from one place to another, as it is not collapsible and occupies large space in the working area as well as on the trucks. Therefore, to avoid this difficulty, design …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 1, 2016 · pp. 01–07 Read article
-
Fabrication and Analysis of Multistage Evaporative Cooler and Comparison with Single-stage Cooler
Abstract: Nowadays air conditioning has become a vital appliance with increasing the living standard of human beings. However, excessive use of air conditioners (AC) turns into health issues and is also linked to global climatic changes. It has been observed that the effects of climate change increase the use of air conditioners affecting human wellness and sleeping conditions. Literature reveals that AC devices are primarily used in living rooms, bedrooms, offices, …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 2, 2023 · pp. 49–54 Read article
-
Design, Fabrication, Analysis and Testing of Carbon Fiber Chain Sprocket for Transmission Applications
Abstract: The sprocket is a very essential part in the transmission of power and motion in most motorcycles. Commonly chain sprockets are manufactured in mild steel. The existing sprocket should be changed regularly between 12,000 km to 15,000 km in vehicles. Chain sprocket has many issues like breaking impacts creates unexpected damages in sprocket teeth also gets wears, Potential reasons for these problems are critical excessive load damage, high effect of …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 25–31 Read article
-
Lean Manufacturing
Abstract: An important goal of lean manufacturing is to speed up response times from suppliers and consumers as well as times spent in the production system. It has a tight relationship to another idea known as just-in-time manufacturing (JIT manufacturing in short). Just-in-time manufacturing prioritises productivity, effectiveness, and waste reduction for the producer and supplier of goods in an effort to match output to demand by only supplying items that have …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 23–26 Read article
-
Thermal Management Of Cylindrical Lithium-Ion Battery Using A Wavy Tube
Abstract: To maintain a proper temperature range and eliminate local temperature disparities, thermal management is required for lithium-ion batteries in electric vehicles. A wavy tube is presented for a liquid cooling cylindrical lithium-ion battery module in this research. On the suggested battery module, three-dimensional transient simulations were run, and numerical improvements were made by changing the wavy contact angle of the wavy tube. The heat dissipation efficiency and temperature field homogeneity …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 2, 2023 · pp. 10–22 Read article
-
A Modified Memetic Particle Swarm Optimization Algorithm for Sustainable Multi-objective Scheduling of Automatic Guided Vehicles in a Flexible Manufacturing System
Abstract: In the present work, a modified memetic particle swarm optimization (MMPSO) algorithm was applied for a sustainable multi-objective scheduling of automatic guided vehicles AGVs in a flexible manufacturing system (FMS). To achieve sustainable scheduling results for AGVs in FMS, it is imperative to integrate the work center schedule with the AGV schedule, and thereafter, minimize their distance travel and back-tracking in the FMS facility. The work center schedule in the …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 33–47 Read article
-
COMPUTATIONAL AND PARAMETRIC INVESTIGATION ON SINGLE CYLINDER SI ENGINE BASED GENERATOR TO IMPROVE ITS PERFORMANCE AND EMISSION CHARECTERISTICS AS PER THE FUTURE EMISSION NORMS.
Abstract: This work is based on single cylinder SI engine based generator,which is basically working on Gasoline and LPG in Dual fuel mode.The main purpose of this work is to use Alternative fuel,for reducing the emissions of the generator in dual fuel mode.As the engine is dedicated to Gasoline engine,which is conventional fuel.So power is comparatively increasing in case of gasoline engine,but emissions are more as compared to Alternative fuels.Since alternative …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 1, Issue 1, 2015 · pp. 01–10 Read article
-
Effectiveness of Vegetable oil Based Cutting Fluid (VBCF) with Non-ionic Surfactants in Turning EN8 Steel
Abstract: In the present work, properties of the the non-ionic surfactants have been used to formulate vegetable oil based cutting fluid (VBCF) palm oil for the emulsion as non-conventional lubricant. Tool temperature and surface finish are plays an important indicator of quality in manufacturing industries and thus they are regarded as the most important parameters to be considered. In this present work different machining parameters were taken and their effect on …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 5, Issue 2, 2019 · pp. 21–30 Read article
-
Thermal Simulation and an Analysis on an Exhaust Gas of a Teg Model using Fluent
Abstract: As the First law of Thermodynamic says “energy is directly proportional to work done” and law of conservation of energy “Energy can neither be created nor can be destroyed, it can only be transformed from one form to another”. Unfortunately any energy policy that produces improvements in the short term is often one that destroys the environment in the long run. It is a universal truth that no exponential growth …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 6, Issue 2, 2020 · pp. 30–48 Read article
-
Modeling, Analysis and Vibrational Behaviour of A Steam Turbine Blade
Abstract: In this research work, the 2nd LP stage of 250MW steam turbine that having 102 blades is considered and blade geometry for various cross-sections had developed with inputs given as co-ordinates which is from blade root to tip of the portion by using UNIGRAPHICS. In order to achieve its desired performance for a steam turbine blade, the blade material has to withstand ambient conditions such as loading, temperatures, pressures and, …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 27–45 Read article
-
Evaluate the Effectiveness of Pranayama on Reduction of Pre-examination Anxiety Level Among Senior Secondary Students at Selected Schools of Goindwal Sahib, Punjab, 2019
Abstract: Everyone has to work more accurately and fast in this competitive environment. To keep pace with this advance culture students also need to be more competent and efficient, sometimes these higher expectation and work pressure causes anxiety among students. It works positively for them too as it keep motivating them to achieve their goal. However sometime excessive anxiety among students can impair their functioning which need some coping strategies. Pranayama …
Published in International Journal of Neurological Nursing · Vol. 8, Issue 2, 2022 · pp. 24–32 Read article
-
Evaluating the Impact of Objective Structured Clinical Examination (OSCE) on Knowledge and Skills in Eclampsia Management Among Primary Health Care Center Nurses
Abstract: Background: Pregnancy is a phenomenon of joy and pain, an expectant mother during pregnancy will have to handle associated wellness and illness. The phase of pregnancy is challenging for every mother. A significant number of physical, physiological, and psychological changes occur during pregnancy, and these changes can cause minor problems and major complications, one such complication commonly addressed is eclampsia. The present study was designed to assess and manage eclampsia …
Published in International Journal of Obstetrics, Perinatal and Neonatal Nursing · Vol. 9, Issue 2, 2023 · pp. 19–23 Read article
-
Re-Designing Spaces Under Elevated Roads
Abstract: The rapid expansion of elevated road networks in Indian metropolitan cities has significantly improved urban mobility while simultaneously creating extensive underutilized spaces beneath flyovers and elevated corridors. In Mumbai, these under-elevated spaces frequently remain neglected, poorly illuminated, and socially disconnected, often becoming locations for debris dumping, illegal parking, informal encroachments, and unsafe activities. Despite several beautification initiatives, including landscaped gardens, public art installations, and pedestrian walkways, many interventions fail to …
Published in International Journal of Landscape Planning and Architecture · Vol. 12, Issue 2, 2026 Read article
-
CyberSentinel: A Proposed Hybrid AI Framework for Real-Time Cyber Threat Intelligence
Abstract: Modern cyberattacks have grown far more sophisticated, frequent, and fast-moving than the signature-based intrusion detection systems many organizations still rely on. This paper proposes CyberSentinel, a hybrid artificial intelligence framework for real-time cyber threat intelligence (CTI) that combines three complementary techniques into a single detection pipeline: a Convolutional Neural Network–Long Short-Term Memory (CNN-LSTM) module for network traffic anomaly detection, a Random Forest ensemble for structured log classification, and a transformer-based …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 12, Issue 2, 2026 Read article