Search
650 articles for “Temperature”
-
Temperature-Dependent Acoustic and Thermodynamic Investigation of Molecular Interactions in the 1-Propanol–n-Hexane Binary Mixture
Abstract: The present study investigates the molecular interactions and thermophysical behavior of the binary mixture comprising 1-propanol and n-hexane over the temperature range of 288.15–318.15K. The experimental determination of density (ρ), viscosity (η), and ultrasonic velocity (u) was carried out over the entire composition range, and the measured data were utilized to evaluate several acoustical and thermodynamic parameters, including the Van der Waals constant, relaxation strength, acoustic impedance, Rao’s constant, Wada’s …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 12, Issue 2, 2026 · pp. 16–33 Read article
-
Effect of Nanoclay on the Performance of Calotopis Gigantea Fiber Reinforced Thermoplastic Composites at Distinct Temperature
Abstract: Polymer-based nanocomposite is a developing subject that attracts many researchers due to its special qualities and versatility. Because the specific surface areas of nanofillers in nanocomposites are so high, it is much simpler to produce mechanical properties at the interface. Furthermore, a favorable interaction between the nanofillers and polymer matrix may manifest itself even at comparatively lower percentages of loading nanofillers. Thus, a smart, adaptive polymer nanocomposite material with the …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Comprehensive Review and Analysis of Gas Turbine Power Plant Performance: Impact of Operating Conditions, Ambient Temperature, and Cycle Configurations
Abstract: This study presents a comprehensive review of gas turbine (GT) power plants, focusing on simple and complex cycles. The review examines the influence of operating conditions, ambient temperature, and cycle configurations on GT performance. Turbine work and thermal efficiency decrease with increasing ambient temperature. Thermal efficiency increases linearly with compression ratio, but decreases with ambient temperature. Specific fuel consumption (SFC) increases with ambient temperature and lower turbine inlet temperature. Compression …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 12, Issue 1, 2026 · pp. 16–28 Read article
-
The Enduring Impact and Future Trajectory of Semiconductor Temperature Sensing: A Study
Abstract: We live in a world obsessed with measurement, and temperature is its most intimate metric. It isthe difference between a thriving processor and a melted core, between a stable chemicalreaction and a catastrophic one, between a comfortable home and an inhospitable one. Fordecades, this measurement was the domain of mercury columns and bimetallic strips—physical,analog, and stubbornly limited. Then came the silent revolution: the semiconductor temperaturesensor. Semiconductor technology has revolutionized the …
Published in International Journal of Analog Integrated Circuits · Vol. 11, Issue 2, 2025 Read article
-
Effect of variation of Elevated Temperature on Compressive Strength of Metakolin concrete
Abstract: It has been found that high early temperature has negative impacts on later compressive strength of concrete. Some researchers investigated the adverse effect on long term strength of concrete due to high initial temperature. The effect of temperature on different properties of concrete is considerable and remained the subject of research activities of a lot of researchers. Different investigators moved in different ways and investigated temperature effect by changing different …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 9–16 Read article
-
Monitoring the Effect of Temperature on Percentage of Petroleum Hydrocarbon Remediation in Packed Bed Units using Agro-Based Adsorbents
Abstract: This research demonstrates the significance of adsorbent and packed bed unit or column for the treatment of water medium contaminated with petroleum hydrocarbon. The investigation further revealed the effect of temperature on the performance of the adsorbent in treatment of water medium contaminated with petroleum hydrocarbon. The investigation delved deeper into understanding the influence of temperature on the adsorbent's efficacy in treating water mediums contaminated with petroleum hydrocarbon. The study …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 2, 2023 · pp. 35–47 Read article
-
Effect of Temperature on Fungi Concentration in Crude Oil Remediation in an Aerated Bioreactor
Abstract: This research work was conducted to demonstrate the significance of temperature on the characteristics of fungi growth of crude oil degradation in fresh and salt water media. Comparison of fresh and salt contaminated water media was examined, the effect of temperature on crude oil degradation and the characteristics of total heterotrophic bacteria and fungi action. For Total Heterotrophic Fungi (THF) were Aspergillus niger, Aspergillus flavus, mucor sp, penicillium sp, Aspergillus …
Published in International Journal of Environmental Chemistry · Vol. 8, Issue 2, 2022 · pp. 12–21 Read article
-
Performance of Temperature on Compressive and Shear Strength of High Strength Fiber Reinforced Concrete
Abstract: ABSTRACT This paper presents the results of the experimental investigation of various strengths at elevated temperature of high strength fiber reinforced concrete (HSFRC). Variables considered in the research work are various strengths, temperature and fiber volume fractions. Various strengths considered for investigation are compressive strength, shear strength. Concrete mix of M60 grade and crimped steel fibers with aspect ratio 50 are used. The fiber volume fraction is varied from 1 …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 13–23 Read article
-
Consequence of Hall and Ion-slip Currents on Boundary Layer Flow with Power-law Deviation Wall Temperature
Abstract: MHD boundary layer flow in permeable medium along vertical plate with power-law deviation wall temperature in a gyratory system for the effects of Hall and ion-slip currents have investigated numerically. The ordinary differential equations are obtained from considered system of partial differential equations using usual transform. The Nachtsheim- Swigert shooting iteration method along with sixth order Runge-Kutta integration technique has employed to solve the non-dimensional system of ordinary differential equations. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 2, 2020 · pp. 10–20 Read article
-
A PARAMETRIC ANALYSIS OF AMBIENT TEMPERATURE ON FLAT AND CURVED SURFACE OF A PV CELL
Abstract: This work focused on investigating and controlling the effect of ambient temperature on the surface temperature of a PV module. An experimental approach is carried out to provide ventilation on the surface of the PV panel with the help of a blower. With the increase in solar irradiance, the panel temperature also increases so experiment is conducted for different velocities of the air with the help of a blower to …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 1, 2018 · pp. 39–48 Read article
-
Modelling the Effect of Functional Parameter Upon Temperature on The Biodegradation Rate of Hydrocarbons: A Mathematical Review
Abstract: As oil industries continue exploration and exploitation of the environment, the tendency of oil spillage, and by extension, pollution of the marine and coastal environment is on the rise. Therefore, this research work reviews the methodologies or ways of curbing this menace which includes the use ofmicrobes to consume or ‘eat up’ such oil spills in a series of redox processes. However, several factors affect the rate of consumption of …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 1, 2022 · pp. 43–49 Read article
-
Simulation of Heat Generated on Crude Oil Degradation upon the Effect of Temperature in Bacteria Growth Kinetics in a Bioreactor
Abstract: Model was established to simulate the heat generated by bacteria with the interaction of substrate (crude oil) degradation in a bioreactor upon the influence of temperature. The model was predicted by simulating the characteristics of bacteria interaction with substrate at temperature of 15oC, 30oC, 45oC, 60oC, 75oC, 90oC, 105oC and 120oC and heat generated is within the range of -1.0 to 7.1kcal/hr for bacteria in fresh water medium whereas for …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 2, 2022 · pp. 39–54 Read article
-
Study on Preparation and Properties of Agro-waste Particleboard at Various Press Temperatures
Abstract: This study concerns the influence of temperature on changes in physical and mechanical properties of particleboard fabricated from betel nut (Areca catechu L) fiber (Agro-waste) and urea-formaldehyde adhesive during hot-pressing with multiple press temperatures (120, 130, 140, 150 and 160°C) at 15 minutes. The physical and mechanical properties of particleboards were determined by British Standard (BS-1811) and Indian Standard (IS-3087) Methods. For some physical and mechanical properties, it appears that …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
An Analytical Model to Predict a Real Time Temperature Variation During Laser Treatment of Cancer Tissues
Abstract: This work presents an analytical solution to provide a real time variation in increase of temperature during laser-treatment of cancer tissues. Energy conservation equation is used to model the respective laser treatment process considering application of the laser and related heat loss as heat source terms. The present prediction is validated first with existing literature and extended the same to predict the effect of different process variables, such as laser …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 11, Issue 1, 2025 · pp. 1–8 Read article
-
Redox system initiated improved low-temperature colouration of real silk with metal-complex dyes for energy conservation
Abstract: Silk has always been the symbol of royalty due to its lustrous appearance and peach like softness. It can be dyed in bright shades with the available natural and many synthetic dyestuffs. The slight cationic character of silk makes it possible to be dyed with anionic synthetic dyes such as acid, metal complex, reactive and selected direct dyes. The main objective of colouration of a textile fibre should be to …
Published in International Journal of Green Chemistry · Vol. 2, Issue 1, 2016 · pp. 9–17 Read article
-
Treatment of Petroleum Hydrocarbon: The Concept of Dissolved Oxygen and Iron Characteristics using Adsorbent and Temperature Effect
Abstract: The treatment of petroleum hydrocarbon was monitored by considering the characteristics of dissolved oxygen and iron concentration on the impact of temperature variation on the performance of the adsorbent used. The research revealed that increase in the potential performance of the adsorbent in petroleum hydrocarbon removal enhanced variation in the characteristics of the dissolved oxygen and iron content in the packed bed unit for the treatment of water medium contaminated …
Published in International Journal of Chemical Separation Technology · Vol. 9, Issue 2, 2023 · pp. 13–19 Read article
-
Investigation on Temperature Control of Boiler using Cascaded Proportional Integral Derivative (PID)
Abstract: Investigation was carried out to demonstrate the PID control mechanism of boiler using cascaded techniques to examine the tank temperature and the amplitude value of model developed without controller and model developed with controller. The influence of temperature was monitored and the effect examined with variation in amplitude. The obtained data from the investigation reveals the significant of temperature variation on the boiler control mechanism especially using Cascaded Proportional Integral …
Published in International Journal of Chemical Engineering and Processing · Vol. 7, Issue 2, 2021 · pp. 43–50 Read article
-
Electrotrophs that Thrive in High Temperatures for the Microbial Electrosynthesis of Organic Materials (Microbial Electrosynthesis)
Abstract: Electrotrophs are a type of microorganism that can use electrons as an energy source for metabolic processes, such as the synthesis of organic compounds. This makes them ideal for use in microbial electrosynthesis (MES), a technology that harnesses these organisms to produce valuable chemicals and fuels from carbon dioxide and other renewable sources. Microbial electrosynthesis is a viable technique for converting carbon dioxide to various organic products and transportation fuels, …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 8, Issue 2, 2022 · pp. 30–35 Read article
-
Effect of Temperature on Particle Size Mixed Ratio on Petroleum Hydrocarbon Treatment in Packed Bed Unit using Adsorbent
Abstract: The significance of temperature on the potential characteristics of the adsorbent performance in treatment of polluted water medium was monitored by using both room and sun dried bioadsorbent. The research furthermore showcases the effect of particle size of the bioadsorbent in the treatment process and obtained result revealed that the particle size is a contributing factor to the efficiency and the potential in which the rate of Total Petroleum Hydrocarbon …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 2, 2023 · pp. 1–12 Read article
-
Effect of Elevated Temperature on Compressive Strength and Flexural Strength of Fiber Reinforced Concrete
Abstract: Now a day concrete is being used extensively in the construction that might be subjected to elevated temperatures. The behavior of concrete structures at elevated temperatures is significant importance in predicting the safety of structures in response to certain accidents or particular service conditions. This paper deals with the mechanical properties of concrete with steel fibers subjected to temperatures up to 500°C. The specimens were kept in oven for 1 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 19–32 Read article