All articles
466 articles
-
Plant Extracts Volume Effects on the Corrosion of MCS Metal Sample using Water-Based as an Inhibitor
Abstract: The effect of water-based extracts of two different samples was examine with respect to volume on the characteristics of MCS metal corrosion inhibition. This research revealed that volume of extracts is a controlling factor in terms of metal corrosion inhibition as demonstrated by the two different water-based extracts investigated. Increase in the inhibiting substance (water-based extract) in terms of volume resulted to decrease in the rate of corrosion of the …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 1–8 Read article
-
INVESTIGATION ON PORTABILITY OF OTUOKE UNDERGROUND WATER.
Abstract: The study was designed to investigate the portability on groundwater in Otuoke, Bayelsa State. A total of four groundwater samples were acquired and analyzed for their physico-chemical and heavy metal parameters. Heavy metals were all analyzed with the Atomic Absorption Spectrometer and spectrophotometer. The result revealed that for the heavy metals, iron was most predominant, ranging from 0.70 to 0.08 mg/L. Arsenic was below the machine detectable limit and Assessment …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 30–36 Read article
-
The Role of Energy Storage in Wind Energy Technology
Abstract: Wind energy is a promising source of renewable energy that has gained increasing attention in recent years. However, wind power generation faces the challenge of intermittent, which can lead to fluctuations in power supply and demand. The solution to this challenge lies in energy storage technologies, which can store excess wind energy during periods of high wind and release it when needed. Energy storage systems (ESS) have an important role …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 26–29 Read article
-
Nanofluids for the Synthesis of Solar Thermal Energy
Abstract: The use of Al2O3-Water nano-fluids in a solar flat plate collector to increase solar energy collection and conversion is examined in this research (SFPC). Both experimental and theoretical analysis is done to determine how effective a solar flat plate collectors is while using water as the fluid medium. Al2O3- Water nanofluid was chosen as the fluid medium to increase the SFPC's capacity for solar energy collecting and conversion. A few …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 22–25 Read article
-
Temporal Monitoring of Drinking Water’s Quality for Adjustment of the Production Station: Case of Gagnoa Drinking Water Treatment Station, Ivory Coast
Abstract: The frequent refusal of local populations to consume tap water, despite the financial resources deployed by the State, constitutes a headache for managers who have to choose between customer satisfaction and the search for profits. The quality (chemical and organoleptic) of the water offered by the managers of drinking water networks is one of the causes of this refusal. The objective of this study is to use the Jar Test …
Published in International Journal of Chemical Separation Technology · Vol. 9, Issue 2, 2023 · pp. 20–28 Read article
-
Optimization and Control of Evaporative Separation Processes
Abstract: Evaporative separation processes are widely used in various industries, including chemical manufacturing, petroleum refining, and food and beverage processing, to separate components based on their vapor pressures. These processes involve the use of equipment such as distillation columns, evaporators, and membrane-based systems, and are critical for ensuring product quality and process efficiency. However, the complexity of evaporative separation processes and the inherent variability in feedstock composition and quality make it …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 27–31 Read article
-
Effects of Compatibilizer and Paper Sludge Content on the Performances of Thermoplastic Polymer Composites
Abstract: One of the environmental issues affecting third-world countries is the economic use of lignocellulose waste, which is now being researched. Paper sludge (PS) composites will allow for the effective use of a waste material that is currently burned or buried, as well as the ability to lower the cost of the composite that is created. In this study, the mechanical and thermalcharacteristics of environmentally friendly composites constructed from PS-reinforced recycled …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 10–21 Read article
-
Assessment on Handling of Faba Bean Grains (Vicia faba L) and Distribution of Bruchids in North Western Amhara, Ethiopia
Abstract: Due to its high protein content, the faba bean can be used in place of meat. It is a significant pulse crop in the world. An assessment was conducted in Eastern and Western Gojjam Administrative to know faba bean grains’ damage level, bruchids distribution and species composition. Two districts wereselected from each Administrative. Two Peasant Associations (PAs) were also selected from each District while five farmers were randomly selected from …
Published in International Journal of Agrochemistry · Vol. 8, Issue 2, 2022 · pp. 31–41 Read article
-
Fabrication and Characterization of Paper-Sludge Reinforced Polypropylene Composites
Abstract: The purpose of this research was to identify some physical and mechanical characteristics of polypropylene (PP) composites reinforced using various paper sludge (PS) and PP combinations, as well as to assess the performance of the coupling agent. The physico-chemical characteristics of the waste sludge material from paper manufacturing wastewater treatment sludge (PS) were investigated. The physical and mechanical properties of the composite were examined in the experiment using three levels …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 15–26 Read article
-
Potato Starch-Based Polyethylene Composite: Fabrication and Evaluation
Abstract: This study's objective was to create and evaluate a biodegradable polymer composite consisting of potato starch (PS) and low-density polyethylene (LDPE). The effects of changing the PS content (10– 40 wt%) on the mechanical (elongation at break and tensile modulus), thermal (heat conductivity), and biodegradability characteristics of the polymer composite were examined. Next, it was examined how the cross-linking agent influenced the polymer composite's mechanical and thermal properties. The melt …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 32–44 Read article
-
Chemical Analysis for the Production of Liquid Detergent
Abstract: This research work is focused on rendering chemical analysis on the production of detergent with focus on the application of sodium tripolyphosphate, carboxymethyl cellulose, sulphonic acid, sodium hydroxide (caustic soda), sodium silicate, and others not mentioned. In this analysis, we considered the mixture of detergent production formulated to meet the required cleansing standard of various applications. Therefore, pH of the detergent was maintained between 7 and 8 to avoid corrosion …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 9–14 Read article
-
Monitoring the Effect of Temperature on Percentage of Petroleum Hydrocarbon Remediation in Packed Bed Units using Agro-Based Adsorbents
Abstract: This research demonstrates the significance of adsorbent and packed bed unit or column for the treatment of water medium contaminated with petroleum hydrocarbon. The investigation further revealed the effect of temperature on the performance of the adsorbent in treatment of water medium contaminated with petroleum hydrocarbon. The investigation delved deeper into understanding the influence of temperature on the adsorbent's efficacy in treating water mediums contaminated with petroleum hydrocarbon. The study …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 2, 2023 · pp. 35–47 Read article
-
Comparative Study on Production and Characterization of Bioethanol from Agricultural Waste Materials
Abstract: Production and characterization of bioethanol from lignocellulosic substrates that include sugarcane bagasse, corn cob and cassava peels were investigated in this research study. The raw materials (sugarcane bagasse, corn cob and cassava peels) were sorted, washed, cleansed to remove dirts and dried to remove moisture contents, and crushed into ground form to increase substrate’s surface area of contacts and sieved through a mesh size of 2 mm. The bioethanol distillates …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 1–9 Read article
-
Design of Batch Reactors for Pulping of Plantain Pseudostem
Abstract: Plantain pseudostem has little application in Africa and constitute major domestic waste and often problematic to manage. It however contains a high content of lignocellulose that can be used for production of pulp. With the geometric decline of feedstock for pulp production due to dwindling wood resources, plantain pseudostem becomes a ready alternative. This study developed design models for batch reactor for the plantain pulping process under isothermal, non-isothermal and …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 1–8 Read article
-
Effect of Activation on the Physicochemical Parameters and Characteristics of Ethanol Production
Abstract: This research demonstrates the effectiveness of activators used to monitor the yield of ethanol production and the role of the physicochemical parameters. The activators used in this study is Morign oleifera and NPK fertilizer as well as the process enhancing microbial activities in the bioreactor for the production of ethanol. The experimental result reveals that the physicochemical parameters enhance the effectiveness of increase in ethanol production, because the physicochemical parameters …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 1–8 Read article
-
Study on Mechanical and Physical Properties of Wood-Plastic Nanocomposites after Fiber Surface Treatment
Abstract: Numerous composites based on high-density polyethylene (HDPE), wood flour (WF), and nanoclay (Cloisite 30B) were prepared by melt compounding followed by injection mold. This paper aims to evaluate the feasibility of using HDPE and underutilized WF as a material for the development of woodplastic composites, as well as the strengthening effect of nanoclay on them. To develop the poor interfacial interaction between the hydrophilic WF and hydrophobic HDPE matrix, as …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 43–53 Read article
-
Chemical Engineering Analysis of Polymer Composite Creation Using Sawdust, Sharp
Abstract: Polyethylene terephthalate (PET) is known for its general adoption for its lightweight and flexibility and durability nature. It is non-biodegradable and contributes majorly to water and land pollution. The amount of plastic-generated waste is increasing extensively following its usefulness there and the inability of users to properly dump or recycle it has resulted in a big threat to the environment. In this research work an attempt has been made to …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 17–29 Read article
-
Evaluation of Reciprocating Pump Operation Using Reliability Analysis
Abstract: In this work, the aim is to carry out a reliability analysis of reciprocating pump operation. The reciprocating pump system and components were evaluated using the Weibull Analysis to obtain reliability, maintainability, availability, and unreliability. The number of failures (NF), mean time between failure (MTBF), Mean Up-Time (MUT), Time to Repair (TTR), Probability Density Function (PDF), Cumulative Density Function (CDF), Hazard Rate and Desirable Time for Systematic Intervention were also …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 30–42 Read article
-
Brain Tumor Detection using Machine Learning Methods-KNN, SVM, DT, RF
Abstract: Brain tumor is a major contributor to illness and death worldwide, and timely diagnosis is essential for successful treatment and improved outcomes Recent research has looked into the possibility of machine learning algorithms for detecting and classifying brain tumours in medical pictures. In this study, four commonly used machine learning algorithms (K-Nearest Neighbours, Decision Trees, Support Vector Machines, and Random Forests) were evaluated for their effectiveness in brain tumor detection. …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 2, 2023 · pp. 48–59 Read article
-
Assessment of Different Wheat Varieties Under Various Nitrogen Levels
Abstract: The correlation between nitrogen (N) application and yield of different wheat varieties was determined at the farms of University of Agriculture Peshawar. Three different wheat varieties viz Pirsabaq 2103, Galaxy and Insaf were grown at five different N levels viz. 0, 40, 80, 120 and 160 kg N ha-1 under randomized complete block design with three replications in split plot arrangements. Mineral fertilizers such as Urea source was used for …
Published in International Journal of Agrochemistry · Vol. 8, Issue 2, 2022 · pp. 16–30 Read article