Search
85 articles for “surface treatment”
-
Influence of Surface Treatments on the Adhesion of Plant Fibers to Epoxy Resin
Abstract: Because of their primary benefits, moderate strength and stiffness, low cost, and the fact that they are a renewable, biodegradable, and environmentally safe material, natural fibers are seen to have potential use as reinforcing agents in polymer composite materials. Since they are inherently hydrophilic, moisture can easily build up on them, weakening or plasticizing the fibers’ adhesion to the surrounding matrix and affecting the performance of composite materials used in …
Published in International Journal of Agrochemistry · Vol. 11, Issue 1, 2025 · pp. 12–24 Read article
-
Organically Modified Peanut Shell Flour-Reinforced Polypropylene Nanocomposites: Effect of Fiber Surface Treatment on Basic Properties
Abstract: Innovative composite ingredients are increasingly being used, particularly in the automotive, aerospace, aviation, and construction industries. Due to the remarkable properties of nanocomposite components, traditional ingredients are being replaced. This study's work focuses on the usage of polypropylene (PP) as polymer matrices and nanoclay and peanut shell flour (PSF) as reinforcing materials. To enhance the mechanical properties of the PP/PSF composites in the present work, PSFs were treated using sodium …
Published in International Journal of Analytical and Applied Chemistry · Vol. 8, Issue 2, 2022 · pp. 19–30 Read article
-
Study on Mechanical and Physical Properties of Wood-Plastic Nanocomposites after Fiber Surface Treatment
Abstract: Numerous composites based on high-density polyethylene (HDPE), wood flour (WF), and nanoclay (Cloisite 30B) were prepared by melt compounding followed by injection mold. This paper aims to evaluate the feasibility of using HDPE and underutilized WF as a material for the development of woodplastic composites, as well as the strengthening effect of nanoclay on them. To develop the poor interfacial interaction between the hydrophilic WF and hydrophobic HDPE matrix, as …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 43–53 Read article
-
Plant-drive Waste Fiber Reinforced Thermoplastic Composites: Modification of Fiber Surface Treatment
Abstract: Plant fibers are being utilized more frequently to create polymer composite parts for the aerospace, construction, and automotive industries. The increased awareness of the toxicity of synthetic fibers is what has caused a rise in the use of plant fibers across a variety of industries. It is crucial to emphasize that "Earth needs humans, not humans need earth," hence decision-makers and researchers are working to replace conventional materials with eco-friendly …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 14–23 Read article
-
Thermal and structural properties of surface treated ragweed fiber reinforced biodegradable polylactic acid biocomposites
Abstract: Natural fiber-reinforced composites (NFRC) are becoming more popular as technological advance recognizes the need for eco-friendly materials. This work presents Giant ragweed (Ambrosia trifida) as a new composite reinforcement material into polylactic acid (PLA) matrix to form novel natural fiber-reinforced composites. Different types of retting techniques are utilized, and hydrogen peroxide retting is proven to provide the most optimized properties. The fibers are taken through subsequent extraction and grinding processes. …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 13–31 Read article
-
Chemical Treatments to Modify the Surface of Agricultural Waste Fibers as a Green Substitute to Cellulosic Fiber Treatment
Abstract: Scientists are searching for natural elements that can decompose naturally and replace synthetic materials that have not been biodegradable for a while. The automotive, space, furniture, construction, medical, and packaging industries are among the many that use synthetic composite materials. This has resulted in growing interest in biodegradable bio composites. In recent years, a variety of stem fibers, including jute, flax, hemp, and kenaf, have been employed to replace the …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 35–45 Read article
-
Review on Green Corrosion Inhibitors
Abstract: Green corrosion inhibitors have attracted considerable research interest in the recent years due to the increase in environmental awareness and restrictions on traditional corrosion inhibitors due to their intrinsic toxicity. Natural products extracts are a good source of green corrosion inhibitors, because they contain the necessary elements such as O, C, N, and S, that helps in attachment of these compounds on metals or alloys which results in development of …
Published in International Journal of Green Chemistry · Vol. 4, Issue 1, 2018 · pp. 13–18 Read article
-
Functionalization of Reclaim Rubber: Possible Precursor for Polyblends in Engineering Applications
Abstract: Improvements in mechanical and dynamic properties of a blend can be achieved by surface treatments such as grafting of functional groups on one of the blend components or activation by the application of a coating of a polymer. This paper describes the effect of grafting maleic anhydride on reclaim rubber with varying levels of maleic anhydride (i.e., 2 and 5 phr) on open two roll mills. Investigated cure characteristics and …
Published in International Journal of Analytical and Applied Chemistry · Vol. 3, Issue 1, 2017 · pp. 18–23 Read article
-
Comprehensive Review on Bamboo-Based CompositeMaterials for Sustainable Engineering Applications
Abstract: Among various natural resources, bamboo has emerged as a promising reinforcement material due to its rapid growth rate, wide availability, low cost, and excellent specific mechanical properties. Bamboobased composite materials combine high strength-to-weight ratio with renewability, making them attractive for diverse engineering applications. The increasing concerns related to resource depletion, carbon emissions, and end-of-life disposal of synthetic composites further highlight the need for biobased and sustainable material solutions. This review …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
A Review on Potential Uses and Characterization of Okra Fiber Reinforced Polymer Composites
Abstract: The environment, ecology, and new rules from the government agencies are major concerns in the quick-paced society. As a result, scientists and researchers are searching for natural fiber reinforced composites that are biodegradable and renewable. Natural fibers have undeniable advantages over synthetic fibers, including low density, equivalent strength, non-toxicity, low cost, and minimal waste disposal issues. The possible uses of natural fibers have been thoroughly investigated by researchers. But in …
Published in International Journal of Environmental Chemistry · Vol. 8, Issue 2, 2022 · pp. 22–33 Read article
-
Corrosion Resistance in Modern Metallurgical Alloys: Mechanisms & Mitigation Strategies
Abstract: Corrosion resistance in metallurgical alloys is a critical factor in their application across various industries, including aerospace, automotive, marine, and construction. This paper delves into the fundamental mechanisms of corrosion, such as galvanic, pitting, crevice, intergranular, and stress corrosion cracking, which significantly affect the longevity and reliability of alloys. It explores the intrinsic and extrinsic factors influencing corrosion behavior, including alloy composition, microstructure, environmental conditions, and mechanical stresses. Advancements in …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 2, 2023 · pp. 30–34 Read article
-
Review on Natural Fiber Composites: Banana/Hemp Fiber and Its Hybrid Composites
Abstract: The centuries ago usage of composites materials plays important role in industrial revolution. In ancient days Egyptians used straw as reinforcement in clay bricks to build house. With the invented of glass fiber and resins, glass fiber reinforced composites found its application in many areas. Abundance nature and moderate specific strength than most of the organic fibers, low density and biodegradable nature make the natural fiber as attractive reinforcement in …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 14–27 Read article
-
Reviewing the Evolution of Nanotechnology in the Oil and Gas Sector: Focus on the Utilization of Silica Nanoparticles
Abstract: Nanotechnology is advancing notably in the oil and gas sector, with its applications demonstrating substantial progress. The use of nanoparticles in various aspects of the industry has shown promise in addressing challenges and improving efficiency. Nanotechnology is finding applications across multiple facets of the oil and gas industry, encompassing areas such as the development of drilling and hydraulic fracturing fluids, cementing for oil wells, improved oil recovery techniques, corrosion prevention, …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 30–36 Read article
-
Low temperature plasma treatment of polymeric membranes: a comparative review
Abstract: This paper presents a comparative study of plasma surface modification of various polymeric membranes. Low temperature plasma treatment using pulsed direct current discharge of different gases was employed to enhance hydrophilicity of membranes. Radio frequency discharge of various gases was used to improve surface properties of different polymeric membranes. The enhancement of hydrophilicity of the plasma modified membrane surface was evaluated by measuring the contact angle. The membranes were characterized …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 1–19 Read article
-
Synthesis of Groundnut Shell Composites: Exploring Chemical Reactions for Particle Treatmentand Modification
Abstract: The utilization of groundnut shell particles as a sustainable and economical filler in composite materials has garnered significant interest in recent years. This manuscript presents an in-depth analysis of the chemical processes involved in synthesizing groundnut shell-based composites, with a focus on the treatment and modification of the particles to enhance their compatibility and functional properties. The study investigates various chemical reactions, including acid and alkali treatments, aimed at altering …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 10, Issue 2, 2025 · pp. 27–32 Read article
-
Optimization Process Parameters of Manganese Phosphate coating developed on En-19 Steels by Statistical Design of Experiment
Abstract: Phosphating is a chemical conversion process in which constituents of a metal surface with a view to produce thin adherent protective coating of insoluble crystalline phosphate by reaction with phosphoric acid solution. This conversion coating should have strong interfacial adhesion and porous enough. The growth of phosphate coating is influenced by method of cleaning of metal surface to be treated before treatment, use of surface activating rinses and acid or …
Published in International Journal of Metallurgy and Alloys · Vol. 2, Issue 2, 2016 · pp. 6–12 Read article
-
Mercerization and Mechanical Properties of Natural Fibre Reinforced Composite: A Comprehensive Review
Abstract: Growing public concern about environmental issues has prompted the production of renewable, economical, and ecologically friendly materials. Thus a shift from synthetic fiber reinforced composites to natural fiber reinforced composites can be seen. Since Fibre reinforcement is deciding factors in the Structural properties of any engineered composite. But poor interfacial adhesion of fibre matrix obstruct it's potential while using in structural applications. Different studies suggested that the surface modification techniques …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 1–8 Read article
-
Renewal of Waste Water: A Review
Abstract: Giving solid and moderate wastewater treatment in rustic regions is a test in numerous pieces of the world, especially in creating nations. The issues and confinements of the incorporated methodologies for wastewater treatment are dynamically surfacing. Unified wastewater accumulation and treatment frameworks are expensive to assemble and work, particularly in territories with low populace densities and scattered families. Creating nations need both the subsidizing to build concentrated offices and the …
Published in International Journal of Landscape Planning and Architecture · Vol. 5, Issue 1, 2019 · pp. 15–28 Read article
-
In-vitro plant regeneration of Mulberry (Morus alba L.)
Abstract: The present investigation entitled “In-vitro plant regeneration of Mulberry (Morus alba L.)” was conducted at Plant Tissue Culture Laboratory of K. K. Wagh College of Agricultural Biotechnology, Nashik, Maharashtra, India. Development of improved protocols for the regeneration of Morus alba L. is important for their commercial utilization. The present study was initiated to optimize in-vitro propagation protocol from nodal culture of Mulberry. Three surface sterilization treatment were used, the nodal …
Published in International Journal of Plant Biotechnology · Vol. 9, Issue 1, 2023 · pp. 24–38 Read article
-
Experimental Analysis of Physical Parameters in Treated Water
Abstract: During the first phase, the surface water treatment plant at Saidabad treats 225 million liters of water per day. In the treated water, turbidity, color, total coliform, fecal coliform, and hardness are reduced; on the other hand, conductivity and total dissolved solids increase. In the wet season, turbidity is high due to relatively coarse particle dispersions in river water. All other parameters, such as, color, total and fecal coliform, hardness, …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 6, Issue 2, 2020 · pp. 32–38 Read article