Search
28 articles for “sliding”
-
Sliding wear behavior of plasma sprayed NiCrAlY-WC based composite coatings on AA5083 alloy
Abstract: WC based coatings was deposited by thermal spray process have been extensively used in industrial application to counter abrasive type of wear. In this study, for the first time NiCrAlY-WC based composite coatings were deposited on AA5083 substrate by plasma sprayed coating technique. The composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness. Sliding wear behavior of coated and uncoated samples was carried out on …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 21–26 Read article
-
A Review on Adaptive Back Stepping Sliding Mode Control on Type 1 Diabetics
Abstract: Making the system state "slide" along a predetermined surface is the goal of the robust controlmethod known as sliding mode control. The sliding surface ensure that the system remains stable evenin the presence of uncertainties or disturbances. Backstepping is a recursive control design methodthat breaks down complex control problems into simpler subsystems. It constructs a series ofLyapunov functions to stabilize each subsystem, eventually achieving stability for the entire system.Based on …
Published in International Journal of Microwave Engineering and Technology · Vol. 10, Issue 1, 2024 · pp. 14–23 Read article
-
Experimental Realization of Constrained Optimization of Sliding Mode Controller Parameters with Modified Objective Functions
Abstract: An appropriately tuning of Sliding Mode Control (SMC) can be used to overcome the weaknesses like sensitivity to parameter variations, modeling errors and external disturbances. In this research article, Non-Dominated Sorting Genetic Algorithm (NSGA-II) based SMC with modified objective function and the best weight values have been evaluated to improve the performance of closed-loop level control system. Equivalent weights and importance weights are assigned to each term of an objective …
Published in International Journal of Software Computing and Testing · Vol. 6, Issue 1, 2020 · pp. 8–25 Read article
-
Stability Analysis of Type-III Wind Turbine Systems Using Radial Basis Function Networks (RBFNs)
Abstract: To accomplish power smoothing, contemporary controllers like adaptive and predictive controllers are used on both the machine and grid sides. Effective machine-side torque control requires robust technologies. Under order to maintain stable performance under nonlinear circumstances, this work employs the sliding mode control technique to control the pitch angle during disturbances. Even in situations where wind conditions fluctuate, the sliding mode control approach optimizes wind power generation by effectively resolving …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 10, Issue 2, 2024 · pp. 25–42 Read article
-
An Optimized Design of the Standard Manual Wheelchair
Abstract: The manual wheelchair is commonly found in hospitals, rehabilitation centers, senior housing and airports for allowing patients, people with physical disabilities or for elderly people. Transferring mishaps are one of the major causes for injuries. Moreover, all the transferring actions between wheelchair and other surfaces are difficult for wheelchair users. This project is aimed at optimizing the existing design of a standard manual wheelchair by introducing a height adjusting mechanism …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 2, 2019 · pp. 1–10 Read article
-
Optimization of Wear Parameters for Medical Implant Applications
Abstract: The purpose of the present research is to check the capability of SS 304 for the application of medical implants and describe the influence of sandblasting process, applied load, frequency, sliding distance on the coefficient of friction of SS 304. In this research, attempts have been made to study the wear behavior of SS 304 at various conditions. In the tribology lab wear test was carried out in accordance with …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Preparation and Characterization of Double Step StirCusted Aluminum Hybrid Composite Reinforced with RHA and Si3N4 Micron Particles
Abstract: Abstract: The improvement of the mechanical and tribological characteristics of composites is always a crucial area of research for materials scientists. Nowadays, particulate aluminum matrix hybrid composites, known as particle-reinforced hybrid aluminum matrix composites (PHAMCs), are becoming more popular due to their desirable properties, cost-effectiveness, ease of processing, and compatibility withtraditional processing techniques. In this current study, a two-step stir casting method was utilized tocreate aluminum hybrid composites using Al6061 …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 1, 2024 Read article
-
Continuous Mining Approaches with Obsolete Database: A Review
Abstract: The sequential pattern mining on progressive databases is very incipient approach, in which many researchers progressively discover the patterns in period of interest. Period of interest is a sliding window perpetually advancing as the time goes by. As the focus of sliding window changes, the incipient items are integrated to the dataset of interest and obsolete items are abstracted from it and become au courant. In general, the subsisting proposals …
Published in International Journal of Software Computing and Testing · Vol. 4, Issue 1, 2018 · pp. 1–9 Read article
-
FOUNDATION FOR WATER THRUST
Abstract: Abstract :- For heavy load on foundation base (In case of pier of bridge of pier) and high rise building. Also design of foundation like wind thrust, seismic force and also due to thrust of water due to heavy rainfall (saturated soil condition) or for cloud bursting, and slide etc to be taken into consideration raft foundation for building or pier in bridge is essential. Also foundation base size required …
Published in International Journal of Water Resources Engineering · Vol. 11, Issue 2, 2025 · pp. 14–19 Read article
-
Optimization of Wear Parameters for Medical ImplantApplications
Abstract: The purpose of the present research is to check the capability of SS 304 for the application of medicalimplants and describe the influence of sandblasting process, applied load, frequency, and slidingdistance on the coefficient of friction of SS 304. In this research, attempts have been made to study thewear behavior of SS 304 under various conditions. In the tribology lab, a wear test was carried out inaccordance with the scheme …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Selection of Grade of Concrete & Grade of Steel
Abstract: Abstract In structural engineering, understanding the load distribution between steel and concrete is crucialfor ensuring the safety and stability of reinforced concrete structures. The load-bearing capacity ofboth materials, steel and concrete, is dependent on their respective characteristic strengths, whichinclude compressive, tensile, bending, and shear strengths. The behavior of a reinforced concretestructure under various loads is influenced by the interaction between these two materials, wheresteel typically handles tensile and bending stresses, …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 1, 2025 · pp. 32–37 Read article
-
Revitalizing Public Realm, and Integrating Sustainable Practices Lead to Healthy and Livable Cities
Abstract: Informality, poor infrastructure, inadequate planning, and poor governance are threatening Indian cities, which are primary engines of economic growth, are subjected to socio- environmental degradation. Sustained physical and social downward slide has made urban public open spaces source of crime, insecurity, and misconduct leading spaces to less personal and more disappearing with time. To prevent the further deterioration in the urban environmental quality, corrective urban transformation strategies and measures are …
Published in International Journal of Urban Design · Vol. 5, Issue 1, 2022 · pp. 31–42 Read article
-
Studies on the External Genitalia of Some Species of Moths of Family Geometridae (Lepidoptera) of Morni Hills, Haryana
Abstract: The present work is a comprehensive study that aims to investigate the external genitalia of male geometrid moths collected from Morni Hills, Haryana. The study is divided into several sections, including an introduction, a review of literature, material and methods, observations, a conclusion, and references. The introduction begins by providing an overview of the family Geometridae and its characteristics. The name of the family is derived from the ancient Greek …
Published in International Journal of Animal Biotechnology and Applications · Vol. 9, Issue 1, 2023 · pp. 50–62 Read article
-
Numerical Analysis of Flow Characterization in a Continuous Crystallizer
Abstract: In this work, hydrodynamics in a draft tube continuous crystallizer is analyzed computationally through Ansys CFD to crystallization phenomena. Hindrance to fluid mixing and particle suspension due to vortexing can be overcome by providing baffles. A draft tube ensures that it directs the flow in vertical direction ensuring good axial blending. Here CFD simulations are performed using multiple reference frame (MRF) with sliding mesh approach in transient condition for flow …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 2, 2016 · pp. 33–43 Read article
-
Numerical investigation of hydrodynamics of batch crystallizer
Abstract: In this work, hydrodynamics in a draft tubebatch crystallizer is analysed computationally using Computational fluid dynamics (CFD). The CFD simulations are performed using multiple reference frame (MRF) with sliding mesh approach in transient condition for flow time of 5s using the standard k-ε turbulence model. The flow-field in batch crystallizer is quantified by calculating time averaged velocity profiles along the horizontal line and by analysing the temporal variation of liquid …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 1, 2017 · pp. 24–35 Read article
-
Landslide Monitoring, Detection and Warning System by Wireless Sensor Network (WSN)
Abstract: Wireless sensor network (WSN) is one of the most hopeful field and has uncountable applications in the real-time systems. Execution of WSN in real-time system for landslide detection and warning system is discussed in the present paper. Sliding of rocks and soil is called landslide. It is triggered mostly because of heavy rainfall or melting of snow and can cause loss of lives and property. Using real-time monitoring the landslide …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 2, 2017 · pp. 24–28 Read article
-
INFLUENCE OF DIFFERENT ISOLATORS ON THE PERFORMANCE OF RAILWAY BRIDGES
Abstract: The functioning and safety of cable-stayed railway bridges play a major role in the reliability of rail transportation networks. This study looks at how various isolators impact the performance of cable-stayed railway bridges, with a focus on how well they may lower dynamic forces, increase structural stability, and address specific problems that arise with cable-stayed structures. Investigated is the effect of different isolator types on the dynamic response and seismic …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 9, Issue 2, 2023 · pp. 39–51 Read article
-
For Analyzing Fraud in Credit Cards, Fuzzy Particle Swarm Optimization (FPSO) with Enhanced Support Vector Machine (ESVM) Classifier
Abstract: Credit cards are extremely significant in today’s economy. However, as the number of Credit Card clients grew, so did the number of Credit Card fraud instances. To fight the upward thrust in credit score card fraud, a number of techniques were recommended. In previous study, a unique fraud detection system was presented that uses similar cardholders’ behavioural patterns to construct a recent behavioural profile of a cardholder in order to …
Published in International Journal of Software Computing and Testing · Vol. 7, Issue 2, 2021 · pp. 1–12 Read article
-
Taguchi based validation of wear prediction for Zirconium dioxide particulate reinforced Aluminium 7068 composites
Abstract: The current work emphasis on the tribological characterization of Zirconium dioxide (Zirconia, ZrO2) particulates reinforced Aluminium 7068 metal matrix composites for different process variables established following design of experiments methodology and consequent taguchi based validation techniques for wear prediction. The pin on disc wear test is carried out on specimens fabricated enroute ultrasonic assisted stir casting with controlled dispersion of 12 Wt.% of ZrO2 and subsequent machining of the castings …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 37–50 Read article
-
Essential of bearing in materials engineering
Abstract: Essentials of bearing have been to maintain lubricant film to prevent metal to metal contact and hence local welding of two surfaces. Tribological and mechanical properties have improved by powder metallurgy route of bearing fabrications. Alloyed non-ferrous plane bearings have better friction coefficients than pure metals. Betterment has appeared in babbit/ bronze particulate reinforced composites. Ni addition has improved performances of graphite-lead free tin bronze composite layers on surface of …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 1–17 Read article