Search
32 articles for “relative graph”
-
Sensitivity of Bearings to Vibration: Its Effect on Ultrasonic Waves, Its Effect on Bearing Life
Abstract: High vibrations caused by various factors in the bearing of a car is a common problem in the automotive industry. Nowadays, the issue of reducing excess vibrations that cause bearing failure in industry has been considered by engineers and industry owners. By examining these vibrations and controlling the vibrations in the cars, it will increase the bearing life and reduce the number of out-of-program stops. The experiments were performed using …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 7, Issue 1, 2021 · pp. 26–30 Read article
-
An Introduction of Graphene: Characterization and Properties
Abstract: Graphene - Its outstanding physical features, including as high electrical conductivity, good thermal stability, and superior mechanical strength, graphene, a two-dimensional, single-layer sheet of sp 2 hybridized carbon atoms, has received considerable attention and scientific interest. Other graphene-related compounds, such as graphene oxide, reduced graphene oxide, and exfoliated graphite, have been generated on a large scale with consistency. Graphene-based materials are great candidates for inclusion into a wide range of …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 2, 2021 · pp. 39–46 Read article
-
Experimental Investigation on Shear & Flexural Behaviour of GFRP-Reinforced Concrete Beam
Abstract: Reinforced concrete (RC) beams are among the most commonly used structural elements in civil engineeringstructures. However, the long-term durability of conventional steel reinforcement is often affected bycorrosion when exposed to aggressive environmental conditions, which can significantly reduce the servicelife and structural performance of concrete members. In recent years, Glass Fiber Reinforced Polymer(GFRP) bars have emerged as a promising alternative reinforcement material due to their high tensilestrength, light weight, and excellent …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 Read article
-
Experimental Investigation on Shear & Flexural Behavior of GFRP-Reinforced Concrete Beam
Abstract: Reinforced concrete (RC) beams are among the most commonly used structural elements in civil engineering structures. However, the long-term durability of conventional steel reinforcement is often affected by corrosion when exposed to aggressive environmental conditions, which can significantly reduce the service life and structural performance of concrete members. In recent years, Glass Fiber Reinforced Polymer (GFRP) bars have emerged as a promising alternative reinforcement material due to their high tensile …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 Read article
-
Density as a Factor Limiting the Workability of Sintering Aluminum Powder Preforms
Abstract: The technology advancement has envisaged going for near net shape of the produces. Also, near netshapes formed are again cold upset for obtaining a final shape of the Product.In this study a general scheme expressing the factors which affect a workability of Sintering aluminium powder preforms. This work deals with an experimental determination Workability of Sintering Aluminium powder preforms is limited by their density. A standard of rings of ratio …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 1, 2018 · pp. 40–43 Read article
-
Empirical Model Relativity of Flexural and Compressive Strength of Concrete Produced with Foundry Waste Sand as Partial Replacement
Abstract: The evaluation presented in this research is to establish the correlation between compressive strength of concrete and flexural strength of concrete of grade 20 at mix ratio of 1:2:4 produced using foundry waste sand as a partial replacement for river sand at different replacement level of 0%, 5%, 10%, 15%, 20% and 25%. The aimed compressive strength was achieved at 15% replacement and the corresponding flexural strength of 3.14 N/mm2was …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 5–10 Read article
-
The Principal role of Carbon nanostructures and quantum size effect onquantum Gravity wave and Space applications
Abstract: Carbon bears several important nanostructures including carbon quantum dots, Carbon nanotube,fullerene, and Graphene. These nanomaterials are sensitive and wide area of research innanotechnology era and nanomedicine. The possibility of sensing, simulating, and performingquantum computation at nanoscale makes carbon nanostructures quit suitable in quantumteleportation, space probe studies, and artificial breathing. This research is focused on the impactof such carbon based structure and quantum size effect on the quantum gravity waves. Thus, …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 11, Issue 2, 2025 Read article
-
The Principal role of Carbon nanostructures and quantum size effect on quantum Gravitywave and Space applications
Abstract: Carbon bears several important nanostructures including carbon quantum dots, Carbon nanotube,fullerene, and Graphene. These nanomaterials are sensitive and wide area of research innanotechnology era and nanomedicine. The possibility of sensing, simulating, and performingquantum computation at nanoscale makes carbon nanostructures quit suitable in quantumteleportation, space probe studies, and artificial breathing. This research is focused on the impactof such carbon based structure and quantum size effect on the quantum gravity waves. Thus, …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 11, Issue 2, 2025 Read article
-
AN INTEGRATED COMPUTER-AIDED PROCESS PLANNING SYSTEM FOR THE MANUFACTURING OF A LEAF SPRING
Abstract: Computer-Aided Process Planning (CAPP) is a key enabling technology for integrating product design and manufacturing in a Computer Integrated Manufacturing (CIM) environment. This paper presents the development and implementation of an integrated, feature-based CAPP system for the manufacturing of an automotive leaf spring assembly. The proposed system bridges the gap between CAD and shop-floor activities by directly mapping design features to manufacturing operations. High-level manufacturing features such as base profiles, …
Published in International Journal of Computer Aided Manufacturing · Vol. 12, Issue 1, 2026 · pp. 10–23 Read article
-
Graph Theory and Matrix Method for Development and Design of Combustion Engine
Abstract: The idea upon which any methodology development is pillared leads to real time decisions if simulation and assessment is as per the standard codes set by standard organizations. More near is the system with standard system more it is appropriate for operation. In the present work system under consideration is internal combustion engine. Fuel cost is one of the most important parameter in life cycle analysis of the internal combustion …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 16–25 Read article
-
Decision Methodology for Site Suitability Index – A Combinatorics Approach
Abstract: Installation and operation of a power plant is dependent upon a large number of parameters which are interdependent. In the present work a methodology based upon the combination of digraph development, matrix representation and computational solution is applied on the problem of site selection for power plant is developed. The aim of present work is the factor identification and methodology development for decision making. This paper identifies various parameters affecting …
Published in International Journal of Energetic Materials · Vol. 2, Issue 1, 2016 · pp. 15–18 Read article
-
Application of Rectangular Patch Antenna for a Moisture Content Sensor
Abstract: Micro-strip patch antenna is a low cost, easy to fabricate, light weight which is used for transmit and receive electromagnetic wave. This paper tells about the micro-strip rectangular patch antenna moisture sensor for different types of rice which are basmati rice and ambemohar rice both are easily available in Indian market and it has been measured by using two different substrate RT-duroid 5880 and FR4 lossy. A relationship is to …
Published in International Journal of Microwave Engineering and Technology · Vol. 1, Issue 1, 2015 · pp. 5–9 Read article
-
MWCNT AND GRAPHENE FOR IMPROVED CORROSION RESISTANCE OF MILD STEEL
Abstract: ABSTRACTThe protective coating method is a passive corrosion protection technique. The protective coating detaches the metallic surfaces from the aggressive media, such as moisture, salts, acids etc. Nanotechnology is a relatively modern development in scientific research, the development of this concept occurred over a very short period of time. One technique that has recently been used to increase the adhesive and anti-corrosive properties of polymer coatings is the addition of …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 12–17 Read article
-
Effect of the class of activating agent (inorganic vs. organic) on the structure of activated carbon materials from biomass †
Abstract: The impact of the class of the activating agent (inorganic Vs organic) on the structure and the crystallographic parameters of the activated carbon materials (ACMs) from biomass was studied. The stems of the waste land weed native of India, namely, Calotropis gigantea were used as a representative example for the biomass based sustainable raw material. Likewise, carbonate (K 2 CO 3 ) and oxalate (Na 2 C 2 O 4 …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 11, Issue 1, 2026 · pp. 27–35 Read article
-
Digital Sketching as a Graphic Language: A Powerful Communication Tool
Abstract: The basic of the graphical language are the illustrations which is followed from the ancient times like in prehistoric Mesopotamia and Egyptian civilization the drawing was carved on the wall and on clay tablet which may be used for circulating the use full information or for need of documentation. If we compare with past the techniques are less and so the graphics medium was also limited but today there are …
Published in International Journal of Architecture and Infrastructure Planning · Vol. 3, Issue 1, 2017 · pp. 36–40 Read article
-
IoT-Driven Crane Management: Enhancing Efficiency Through Broadband Connectivity
Abstract: To address the challenges of scrap management and detect discrepancies in scrap loading and unloading, the system should include the following features: Operator Login: Implement a secure login system for operators to monitor individual performance and activity. Dashboard: Provide a dashboard for real-time monitoring of both operator performance and overall process efficiency. Data Collection: Gather data using existing weight sensors and the installed module. Separate Console and Server: Set up …
Published in International Journal of Broadband Cellular Communication · Vol. 10, Issue 2, 2024 · pp. 1–7 Read article
-
Seismic Analysis and Design of an RCC Twisted Building Using with ETAB
Abstract: This paper investigates the structural behavior of reinforced concrete (RCC)-twisted buildingssubjected to seismic loads using ETABS software. The study focuses on analyzing various degrees oftwist in RCC-twisted buildings, specifically examining the angles of 1.5, 2, 2.5, 3, and 3.5 degrees perfloor. The study looks at how these different twist rates affect important structural parameters like baseshear, story displacement, and story drift through detailed modeling and analysis in ETABS. Theobjective of …
Published in International Journal of Structural Engineering and Analysis · Vol. 10, Issue 1, 2024 · pp. 47–59 Read article
-
A Review on Performance Analysis of CMOS Inverter
Abstract: In this paper, first we study the various inverter circuits and analyze its performance in terms of noise margin, area, power dissipation and computational delay. After that analyze the various parameter of CMOS Inverter circuit using Pyxis schematic tools of Mentor graphics with TSMC 018 CMOS process technology. Based on this simulation, analyze the rise time, fall time and dynamic power dissipation of CMOS inverter. Finally, we got the good …
Published in International Journal of Computer Aided Manufacturing · Vol. 5, Issue 1, 2019 · pp. 29–35 Read article
-
A Predictive Model on Pipeline Corrosion
Abstract: A comprehensive mathematical model is developed to predict corrosion rates in pipeline. The specimenused for this design is coupons (mild steel). Four containers with different solvents of 0.5 concentrationof nitric acids, 0.5 concentration of HCl, fresh water, and saltwater respectively were provided, andthe four paired coupons were placed inside the solvent for seven days. Each day, the coupons wereremoved, washed, dried, weighed, and placed back into the solvent. The result …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 17–26 Read article
-
Development of Nanocomposites for Sensor Applications
Abstract: The development of nanocomposites for sensor applications represents a significant breakthrough in materials science and engineering, driven by the unique properties of nanomaterials. Nanocomposites, which combine nanoparticles with polymers or other matrices, exhibit enhanced mechanical, electrical, and thermal properties, making them highly suitable for various sensing applications. The integration of nanoparticles, such as metal oxide, carbon nanotubes, and graphene, into a composite framework can dramatically increase sensitivity and selectivity, enabling …
Published in International Journal of Applied Nanotechnology · Vol. 11, Issue 1, 2025 · pp. 18–37 Read article