Search
11 articles for “mixture fraction”
-
Nonpremixed and Partially Premixed Natural Gas Combustor Stimulation
Abstract: This paper highlights on the expansive vortex recreation approach for non-premixed and somewhat premixed combustor. On account of vast whirlpool reenactment, basically two scalars are thought about that is blend part and the other one is the advancement variable blend division, which tracks the blending of fuel and the oxidizer, and an advancement variable which racks the worldwide degree of response of the nearby blend. On account of non-premixed burning, …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 1–6 Read article
-
Thermoacoustic Properties of Ethanol-n-Hexane and 1-Propanol-n-Hexane Binary Mixtures: A Comparative Study at 298.15 K
Abstract: Using an Anton Paar DSA 5000 M instrument, measurements of density, sound velocity, and viscosity were carried out for ethanol–n-hexane and 1-propanol–n-hexane binary mixtures across mole fractions ranging from 0.1 to 0.9 at a constant temperature of 298.15 K. These binary mixtures were specifically selected to investigate the behavior of polar–nonpolar molecular interactions and how they affect the thermophysical properties of the system. The density, sound velocity, and viscosity data …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 11, Issue 2, 2025 · pp. 1–8 Read article
-
Liquid-Liquid Extraction Strategies for the Isolation of Bioactive Heterocyclic Compounds
Abstract: Liquid-liquid extraction (LLE) is a widely employed technique for the isolation of bioactive heterocyclic compounds from natural products, fermentation broths, and synthetic mixtures. The efficiency of LLE depends on several factors, including solvent selection, pH manipulation, salting-out effects, and temperature control. Conventional solvent systems, such as water-organic solvent pairs, are commonly used, while advanced strategies, including ionic liquids (ILs), deep eutectic solvents (DESs), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), …
Published in International Journal of Chemical Separation Technology · Vol. 11, Issue 1, 2025 Read article
-
PETROLEUM PRODUCTS: FRACTIONS OF CRUDE OIL
Abstract: Petroleum (also called crude oil), is a source of energy which is non-renewable. It is a naturally occurring liquid found beneath the Earth’s surface (Lithosphere) that can be refined into fuel. Petroleum is a fossil fuel, which means that it has been created by the decomposition of organic matter over millions of years. It is developed in sedimentary rock under severe heat and pressure. Petroleum or crude oil is a …
Published in International Journal of Analytical and Applied Chemistry · Vol. 5, Issue 2, 2019 · pp. 17–33 Read article
-
Investigation of Thermo-Acoustic Properties of Ethanol-Cyclohexane Binary Mixture
Abstract: The density, viscosity, and speed of sound for ethanol-cyclohexane binary mixtures were determined across mole fractions ranging from 0.1 to 0.9 using an Anton Paar DSA 5000 M within the temperature span of 288.15–318.15 K. From these experimental measurements, several thermodynamic and acoustic properties, such as isentropic compressibility, relative association, free volume, relaxation time, Gibbs free energy of activation, internal pressure, and solubility parameter, were derived. These parameters serve as …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 11, Issue 2, 2025 · pp. 1–14 Read article
-
Comparative Study of Molecular Interactions in Binary Liquid Mixtures of 4-Methyl-2-Pentanone with Aniline, N, N-Dimethyl Aniline and Chlorobenzene at 308 K
Abstract: The ultrasonic velocity (u), density (ρ) and viscosity (η) have been restrained for binary mixtures of 4-methyl-2-pentanone with butan-2-one, cyclohexanone and furfuraldehyde at temperature T=308K at changed mole fractions. The experimental data have been used to calculate the acoustical and thermo-dynamical parameters like adiabatic compressibility (βad), free length (Lf), free volume (Vf), internal pressure (πi), acoustical impedance, Gibb’s free energy and their excess volumes in particular, it is seen that …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 2, 2015 · pp. 19–29 Read article
-
Several Phases of Binary Liquid Mixture
Abstract: The system’s overall composition, heat, and stress can all be changed independently. Instead of using parameters like the coordinates of a three-dimensional phase diagram, we often generate a twodimensional phase transformation that is either a thermal diagram at a specified pressure or its composition graph at a fixed temperature. The location of the system points on one of these diagrams correlates to a certain heat, stress, and normal phenomenon. As …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 8, Issue 1, 2022 · pp. 30–34 Read article
-
Assessment of Tensile and Hardness Property of AA5083/Nano-Al2O3 Metal Matrix Composites
Abstract: Al–Mg base composites reinforced with different mixtures of nano-Al2O3 particles have been fabricated by mechanical stir casting and their metallurgical and mechanical characterization has been investigated. In this investigation, the Al2O3 particulates were reinforced into the base matrix of aluminium fabricated with five levels of volume fraction such as Al/0 vol.% Al2O3, Al/2 vol.% Al2O3, Al/4 vol.% Al2O3, Al/6 vol.% Al2O3 and Al/8 vol.% Al2O3. After the Al-base-nano-composites were fabricated …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 28–34 Read article
-
Virgin-Recycled Thermoplastic Matrix Systems as Engineered Composite Materials: A Compositional Framework for Mechanical Property Retention in Secondary Polymer Supply Chains
Abstract: Virgin-to-recycled thermoplastic resin blends, while conventionally treated as simple two- component mixtures in secondary polymer supply chains, exhibit compositional and morphological characteristics that are more accurately described using the framework of engineered composite matrix systems. This paper presents a compositional framework for understanding and predicting mechanical property retention in virgin-recycled polypropylene (PP) and high-density polyethylene (HDPE) matrix systems, developed through more than twenty years of commercial secondary polymer distribution practice …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 Read article
-
An Outline of Gasoline – A Petroleum Product
Abstract: Petrol is short for petroleum, which is unprocessed crude or shale oil. This liquid contains hydrocarbons, and the carbon atoms in crude oil link together in chains of different lengths. Gasoline (American English) or petrol (British English) is a transparent, petroleum-derived liquid that is used primarily as a fuel in internal combustion engines. Gas is short for gasoline, a petroleum byproduct, which is what the fuel used in most internal …
Published in International Journal of Energetic Materials · Vol. 3, Issue 1, 2017 · pp. 19–23 Read article
-
High Strength Concrete (M40) Using Micro Silica and Steel Fiber
Abstract: Abstract: This experimental study examines the combined effects of micro silica (silica fume, SF) as a partial cement replacement and hooked-end steel fibers on the mechanical properties of M40 grade concrete. Concrete mixes were designed as per IS:10262 with a target characteristic compressive strength of 40 MPa. Silica fume was incorporated at 0%, 5%, 10%, and 12% by weight of cement, while steel fibers (aspect ratio ~50) were added at …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 53–57 Read article