Search
36 articles for “mild steel”
-
Organic Compound 5-(4-methoxybenzyl)-N-phenyl-1,3,4-thiadiazol-2-amine and NiS filler used to Mitigation the Corrosion of Mild steel and in Marine Atmosphere
Abstract: The concentration of chloride ions is higher in marine atmosphere. The bulk amount of mild steel uses in sea weather for different works. This metal is very sensitive in chloride ions. It produces hostile environment for mild steel. Chloride ions develop corrosion cell on the surface of mild steel and it changes their external and internal morphology as well as physical, chemical and mechanical properties. Mild steel exhibits corrosion reaction …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 56–64 Read article
-
Impact, Flexural, and Hardness Properties of AISI 1018 Mild Steel Butt Joint Welded using Gas Metal Arc Welding (GMAW) under Various Welding Parameters
Abstract: AbstractThe effects of welding parameters such as welding current, voltage, and travel speed on the impact, flexural, and hardness properties of AISI 1018 mild steel using Gas Metal Arc Welding (GMAW) were investigated. In this research, specimen sizes of 500 mm x 10 mm x 10 mm and 5.5 mm x 10 mm x 10 mm were fabricated according to ASTM standards. In addition, a v-groove had been prepared at …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 6–13 Read article
-
Corrosion Inhibition Studies of Triazinedithiol Inhibitors for Mild Steel in an Acid Chloride Solution
Abstract: Two environmental pleasant triazine dithiol inhibitors 6-diallylamino-1,3,5-triazine-2,4-dithiol monosodium (DAN)and 6-dibutylamino-1,3,5-triazine-2,4-dithiol monosodium (DBN) was synthesized and their corrosion inhibition for slight metallic in a 1 M HCl solution turned into studied the usage of weight reduction methods, electrochemical measurements, and scanning electron microscopy (SEM) techniques. The inhibition efficiency of both DAN and DBN improved with increases in inhibitor concentration but decreased with increases in temperature. Results from potentiodynamic polarization and EIS …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 1–10 Read article
-
Investigation of Mild Steel Corrosion by Clay Soil Environment
Abstract: This research work was carried out to observe the microbiologically induced corrosion in relation to mild steel of clay soil environments. We analyzed the physicochemical parameters and ascertained their biological features and impacts in the soil environment. In course of this research work, clay soil samples were collected in exactly four different locations at 100 m to 200 m and mixed together to form a single sample (sample D). The …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 2, 2022 · pp. 54–63 Read article
-
Electrodeposition of Bright Zn–Co–Fe Alloy Coatings on Mild Steel and Their Characterization
Abstract: Sulphate bath having ZnSO4. 7H2O, CoSO4. 7H2O, FeSO4.7H2O and thiamine hydrochloride (THC) and citric acid (CA) in combination, was optimized for deposition of bright Zn–Co–Fe alloy coating on mild steel. Bath constituents and operating parameters were optimized by Hull cell method, for highest corrosion performance against coating. The effect of current density on deposit characters viz., corrosion resistance, hardness, thickness, CCE were evaluated. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) …
Published in International Journal of Analytical and Applied Chemistry · Vol. 2, Issue 2, 2016 · pp. 17–25 Read article
-
Green Corrosion Inhibitors for Mild Steel in Acidic Media-A Short Review of Literature
Abstract: Corrosion of metals and alloys is an inevitable phenomenon due to metal’s natural tendency to revertback to combined state to attain stability. The article focuses on briefly reviewing few of the greencorrosion inhibitors reported for mild steel in acidic media over last three years. The measurementmethods for evaluation of corrosion rates practically and theoretically are mentioned in the article.The mode of adsorption of the inhibitors and the proposed adsorption isotherm …
Published in International Journal of Green Chemistry · Vol. 7, Issue 1, 2021 · pp. 27–30 Read article
-
Influence of Different Quenching Media on the Mechanical Properties of Mild Steel – A Case Study of Coconut Oil, Mineral Oil, Jatropha Oil, and Water
Abstract: This study elucidates how local cooling agents, such as coconut oil and jatropha oil, influence the mechanical characteristics of heat-treated mild steel. Tensile testing, Brinell hardness testing, and microstructural analysis were conducted on both heat-treated and untreated samples. The results show observable differences in the heat-treated materials’ mechanical characteristics. Specifically, the yield strength increased across all quenched media, while the ultimate tensile strength decreased for samples cooled with coconut oil …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 2, 2024 · pp. 1–8 Read article
-
Experimental Study and Analysis of Coefficient of Friction for Mild Steel Under Various Lubrication Conditions
Abstract: The coefficient of friction plays decisive role in the metal-forming processes. This study focuses on determination of the coefficient of friction between work piece and lubricants using ring compression test by experiments physical modeling and finite element (FE) simulation. A series of ring compression tests were carried out to obtain friction coefficients of mild steel under lubricants including boric acid, Vaseline, grease and dry conditions. According to Male and Cockcroft …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 2, 2018 · pp. 34–42 Read article
-
Experimental Investigation And Optimization Of Process Parameters For Thrust Force, Power Consumption And Energy Consumption During Drilling Of Mild Steel On Lathe Machine
Abstract: Drilling is one of the major operations to be carried out in almost every manufacturing industry. During this operation drilling tool drills the metal continuously which increases thrust force. Due to this force, power consumed during drilling operation. So in this research work an attempt to experimentally investigate and then optimization of the effect of different drill parameter like feed and spindle speed on the thrust force, power consumption and …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 1, 2016 · pp. 08–19 Read article
-
MWCNT AND GRAPHENE FOR IMPROVED CORROSION RESISTANCE OF MILD STEEL
Abstract: ABSTRACTThe protective coating method is a passive corrosion protection technique. The protective coating detaches the metallic surfaces from the aggressive media, such as moisture, salts, acids etc. Nanotechnology is a relatively modern development in scientific research, the development of this concept occurred over a very short period of time. One technique that has recently been used to increase the adhesive and anti-corrosive properties of polymer coatings is the addition of …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 12–17 Read article
-
Inhibitors Used to Control Corrosion of Mild Steel in Crude Oil Recovery
Abstract: Industries first select construction materials on the basis of safety and cost-effectiveness. Physical requirements can be satisfied easily but corrosion effects seriously complicate the selection of suitable materials. The corrosion-mitigations can be enhanced by the coating of organic and inorganic substance but its costs must also be considered. The cost of material depends upon design and physical requirements of the material. The attractive facial appearance makes the material expensive. Initially …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 18–39 Read article
-
Design, Fabrication, Analysis and Testing of Carbon Fiber Chain Sprocket for Transmission Applications
Abstract: The sprocket is a very essential part in the transmission of power and motion in most motorcycles. Commonly chain sprockets are manufactured in mild steel. The existing sprocket should be changed regularly between 12,000 km to 15,000 km in vehicles. Chain sprocket has many issues like breaking impacts creates unexpected damages in sprocket teeth also gets wears, Potential reasons for these problems are critical excessive load damage, high effect of …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 25–31 Read article
-
Properties in Materials for Car Frame Structure
Abstract: Selection of materials for car body frame ‘the body-in-white’ considers association of structural components. This context emphasizes competitive materials like aluminum and composites in place of steel for equivalent performances in area body panels. Continuous variation in legislation and competences of industrialists to competitive market have appeared to use functionally graded materials of additive properties like thermal transport and joining ease. Tubular shapes have encouraged production of stiff commercial auto …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 41–51 Read article
-
A Review on Green Inhibitors to Corrosion of Steel
Abstract: Traditions of green corrosion inhibitors are described to elucidate soybean oil derivatives, Spondias cytherea leaves, Rosmarinus officinalis L. leaves, Chrysophyllum albidum; Tridax procumbens L. leaves, roasted coffee, Jatropha curcas leaves, Propolis, Manilkara zapota fruit peel, avocado, Canna indica flower. Green inhibitors are ever praised due to environmentally friendly usage. Industrial feasibility is studied from laboratory simulations. Carbonated drink corrosion of steel is most acceptable to use green inhibitors. Corrosion in …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 12–21 Read article
-
Effect of Environmental Parameters on Metal Corrosion in Soil Using Finite Element Method
Abstract: Deterioration of buried metal due to corrosive soil environment is a major issue worldwide. Although failure of buried metal due to corrosive soil is an old problem, yet such failures are still uncontrollable even with the application of advanced corrosion protection technologies. Therefore, understanding environmental parameters causing corrosion of buried metals are necessary. This research work reviews environmental parameters causing corrosion of buried metal in soils. These functional parameters include: …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 1, 2020 · pp. 1–13 Read article
-
Effect of Indigenous Micros on Metal Corrosion in Different Water Environment
Abstract: The research on the effect of indigenous micros on metal corrosion in different water environment in life sciences and other fields as well as their significance was investigated. Mild Steel is one of the construction materials used in the industries. It has a young modulus of 200GNm-2. This paper focuses on the experimental study for the effect of indigenous micros on metals in different water environment and also of the …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 1–10 Read article
-
Study the effect of lubrication on hardness in the ring compression test
Abstract: Mild Steel is commonly used to produce automotive parts such as shafts, gears and bearings. This paper focuses on the hardness distribution in the mild steel ring specimen after compress under rigid dies. Three different types of lubricants namely boric acid, Vaseline, grease and dry condition were employed as lubricants and the coefficient of friction corresponding to the lubricant evaluated using standard ‘Ring compression test’. The strain distributions obtained from …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 18–27 Read article
-
Effect of Environmental Parameters on Corrosion of Metal Steel in Stagnant Fresh Water Using Finite Element Approach
Abstract: Corrosion as the determination or destruction of metal due to the reaction with it environment has posed a large amount of threat to industrial plants, human, increased cost of maintenance of plant and like cause injury to human due to accident in work place. This work studies the effect of environmental parameters of corrosion of three types of steel, Cast iron, mild steel and stainless steel in stagnant water media …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 1, 2020 · pp. 1–23 Read article
-
Monitoring of the Physicochemical Properties of Some Important Parameters That Induce Metal Corrosion in Water Medium
Abstract: This investigation addresses the effect of freshwater quality on metal corrosion in Choba river located in Obio/Akpo Local Government Area of Rivers State of Nigeria. The research involves the use of four different metal coupons namely Carbon Steel (CBS-D), Mild Steel (MS-B), Stainless Steel (SST-C), and Copper Steel (CPS-A). The different metal coupons were immersed in the freshwater medium and the freshwater medium is contaminated with industrial activities. The rate …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 2, 2024 · pp. 24–36 Read article
-
Studying the Effects of Extracts that Prevent Corrosion on Sheet Metal in an Acidic Condition
Abstract: The prevention of corrosion in steel materials in acidic conditions is summarized in this paper. There are many accelerated corrosion preventives for acidic solutions available. High temperatures, lowgrade steels, and HCl solutions are the main focus points. The creation of corrosion inhibitor compositions which combine corrosion inhibitors with surfactants, solvents, and expressions to increase the potency of single compounds at extreme temperatures is another focus of this analysis. This review’s …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 22–26 Read article