Search
43 articles for “high strength steel”
-
Cyclic Loading Over “Stress Behaviour of High Strength Fibre (Steel and Glass) Reinforced Concrete
Abstract: Construction spectrum is growing as it has never been before; there is always something under new construction. It is thus very much important to use updated materials in construction to improve usability, workability and durability, along with the increase in characteristic strengths of material with respect to high rise structures specially. Concrete is one such material obtained from mixing of various materials. Concrete is good at compressive strength but shows …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 1, 2017 · pp. 17–31 Read article
-
Properties in Materials for Car Frame Structure
Abstract: Selection of materials for car body frame ‘the body-in-white’ considers association of structural components. This context emphasizes competitive materials like aluminum and composites in place of steel for equivalent performances in area body panels. Continuous variation in legislation and competences of industrialists to competitive market have appeared to use functionally graded materials of additive properties like thermal transport and joining ease. Tubular shapes have encouraged production of stiff commercial auto …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 41–51 Read article
-
Steel in Marine Weather
Abstract: Offshore structures of steel are reviewed after suitable application at onshore. Coat of stitch pad wet weld heat treat is subjected to improve the properties from high strength low alloy steel. Underwater welding with or without environment has modifications from the use of weld heat to heat treat, selection of electrodes containing silicates and polymer agglomerates to induce more heat of weld and penetration. Typical coat crack detect inswing from …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
High Strength Concrete (M40) Using Micro Silica and Steel Fiber
Abstract: Abstract: This experimental study examines the combined effects of micro silica (silica fume, SF) as a partial cement replacement and hooked-end steel fibers on the mechanical properties of M40 grade concrete. Concrete mixes were designed as per IS:10262 with a target characteristic compressive strength of 40 MPa. Silica fume was incorporated at 0%, 5%, 10%, and 12% by weight of cement, while steel fibers (aspect ratio ~50) were added at …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 53–57 Read article
-
Studies on corrosion mechanisms of steel wire ropes
Abstract: Degeneration of lubrication by seepage of water to core of ropes produces corrosion to change relevant properties. Corrosion of wire ropes in suspender of cross-sea bridges has induced from sulfur dioxide present in environment. Stress corrosion accident of steel wire in coalmine has studied by stress corrosion behaviors of high strength steel wires in mine trickling water. Keywords Steel, Rope, Corrosion, Fracture, Mine water, Tensile test, Stress corrosion crack
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 5, Issue 1, 2019 · pp. 28–35 Read article
-
A Broad Review on the Impact of spring back/spring go During Bending Operation
Abstract: AbstractSpring back is the most important element impacting the perfection of sheet metal components because of the spring back properties of sheet metal, designing forming dies is particularly complex. This is a critical issue since spring back is a common forming issue with metal forming process using high-strength steel sheets. Once a stress is released, the material's elastic recovery forces the metal to spring back into shape. There are several …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 14–19 Read article
-
Microstructure and Mechanical Behavior of Microalloyed Forging Steels
Abstract: The microalloyed (MA) forging steels have been developed over the past several decades and they are gradually employed in the high-performance applications in many structural, automotive, and numerous engineering applications. The principle of microalloying contents in the Fe–C alloy system, thereby preferably combined with different mechanical, heat treatment, and microalloying solubility control the precipitation behaviors that lead to enormous opportunities to develop a new generation of high strength low alloy …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 1–14 Read article
-
SEISMIC ANALYSIS OF G+20 RCC FRAMED STRUCTURE AND STEEL BEAM-CONCRETE COLUMN HYBRID STRUCTURE
Abstract: In the realm of structural engineering, the quest for innovative solutions that harmonizeperformance, efficiency, and sustainability remains an ongoing pursuit. In the dynamic landscape of high-riseconstruction, the pursuit of innovative solutions that combine efficiency, strength, and sustainability has led tothe exploration of hybrid structural systems. One such intriguing approach is the integration of steel beamsand concrete columns, where the unique properties of each material are harnessed to create a cohesive …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 2, 2023 · pp. 47–60 Read article
-
Plastics Compressive Strength Testing
Abstract: Compression test is a mechanical test that determines how much compressive force a material to resist before cracking. A gradually applied load compresses the test item, which is commonly in the shape of a square, pyramid, or cylinder, between the platens of a compression-testing machine. Many ductile metals, such as mild steel, have extremely high compression strength, yet measuring them is challenging. Whenever a load is given to a ductile …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 46–50 Read article
-
Use of Ausforming in Improving Reduced Activation 5%Cr Steels
Abstract: Improvement of reduced activation 5% Cr steels for improved performance of the parts during a thermonuclear reactor, (associated in Nursing enlarged application temperature) for structural materials like 5%Cr steels is crucial. The development of this generation of 5% Cr steels (i.e. EUROFER) is one among the aims of this EURO fusion programme for advanced steels. The goal of this work is to find out the foremost effective thermo-mechanical treatment of …
Published in International Journal of Energetic Materials · Vol. 1, Issue 2, 2015 · pp. 5–6 Read article
-
Selection of Grade of Concrete & Grade of Steel
Abstract: Abstract In structural engineering, understanding the load distribution between steel and concrete is crucialfor ensuring the safety and stability of reinforced concrete structures. The load-bearing capacity ofboth materials, steel and concrete, is dependent on their respective characteristic strengths, whichinclude compressive, tensile, bending, and shear strengths. The behavior of a reinforced concretestructure under various loads is influenced by the interaction between these two materials, wheresteel typically handles tensile and bending stresses, …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 1, 2025 · pp. 32–37 Read article
-
A Review on Steel Metallurgy
Abstract: Steel is mostly manufactured in the manufacturing industries and it is nearly ninety percent due to its extremely higher strength and high toughness. This review paper discusses on the classification of steels, steel as a potential engineering material, mechanical properties and fabrication properties of steels. It also explains on its applications, low alloy steels groups and its properties. This review article also discusses on special steels like micro alloyed steels, …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 1, 2024 · pp. 1–6 Read article
-
Design, Fabrication, Analysis and Testing of Carbon Fiber Chain Sprocket for Transmission Applications
Abstract: The sprocket is a very essential part in the transmission of power and motion in most motorcycles. Commonly chain sprockets are manufactured in mild steel. The existing sprocket should be changed regularly between 12,000 km to 15,000 km in vehicles. Chain sprocket has many issues like breaking impacts creates unexpected damages in sprocket teeth also gets wears, Potential reasons for these problems are critical excessive load damage, high effect of …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 25–31 Read article
-
Influence of Recycled Aggregate and Steel Fiber on the Compressive Strength of Concrete: A Comparative Study of NAC and RAC Mixes
Abstract: Abstract This study evaluates the impact of varying proportions of recycled concrete aggregate (RCA) and steel fiber content on the compressive strength of concrete mixes. Five concrete mixes were prepared with different percentages of RCA (0%, 25%, 50%, 75%, and 100%), using a constant water-to-cement ratio (w/c) of 0.55. Additionally, each mix included variations with 1% and 2% steel fiber by volume, corresponding to 78.5 kg/m³ and 157 kg/m³, respectively. …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 11–16 Read article
-
Structural Efficiency and Sustainability of Bamboo Architecture: Material Performance, Joinery Techniques and Contemporary Applications
Abstract: Abstract Bamboo is increasingly recognised as a structurally efficient and environmentally responsible construction material, offering a viable alternative to conventional high-carbon materials such as steel, concrete, and engineered timber. Its rapid renewability, high tensile strength, low embodied energy, and favourable strength-to-weight ratio position bamboo as a key material for sustainable architecture in both vernacular and contemporary contexts. This paper presents a comprehensive assessment of bamboo architecture by examining material performance, …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 48–55 Read article
-
Seismic Behavior of Composite Steel-Concrete Beams in High-Risk Earthquake Zones: An Analytical and Experimental Approach
Abstract: Abstract This study investigates the seismic performance of composite steel-concrete beams in high-risk earthquake zones through a combination of analytical modeling and experimental testing. Composite beams, which combine the strengths of steel and concrete, are increasingly utilized in structural designs due to their superior load-bearing capacity and ductility. The research emphasizes the behavior of these beams under seismic loading, focusing on critical parameters such as energy dissipation, load transfer mechanisms, …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 2, 2025 · pp. 43–64 Read article
-
Recent Advances in the Development and Performance Optimization of Advanced Metallic Alloys
Abstract: The continuous demand for high-performance materials in aerospace, automotive, energy, and biomedical industries has accelerated research and development in advanced metallic alloys. Metallurgy and alloy design play a crucial role in achieving superior mechanical, thermal, and chemical properties while maintaining cost efficiency and sustainability. This study presents a comprehensive overview of recent advances in metallic alloy development, focusing on novel alloying strategies, microstructural control, and performance optimization techniques. Emphasis is …
Published in International Journal of Metallurgy and Alloys · Vol. 12, Issue 1, 2026 · pp. 1–6 Read article
-
Corrosion Protection of Rebar steel in Ocean Atmosphere
Abstract: Rebar is an important engineering metal. It is used in construction of housing, bridge and other infrastructures works. It is surround with concrete for strengthen building block components. The concentration of chloride ions in ocean atmosphere is higher so it produces hostile environment for rebar steel. The lots of porosities are available on the outer surface area of concrete so chloride ions enter inside by osmosis or diffusion process. It …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 1–11 Read article
-
Evaluation of Culvert design by FRP Rebars
Abstract: Abstract The increasing need for long-lasting and sustainable infrastructure has encouraged the use of innovative materials in civil engineering applications. This study examines the design of a culvert reinforced with Fiber Reinforced Polymer (FRP) bars as a substitute for conventional steel reinforcement. FRP bars provide notable benefits such as excellent resistance to corrosion, a high strength-to-weight ratio, and improved durability. These properties make them especially appropriate for structures exposed to …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 30–35 Read article
-
Effect of Steel Slag and Quarry Dust on the Flexural Strength of Concrete
Abstract: The effect of quarry dust and steel slag on the flexural strength of concrete has been experimentally studied and reported in this paper. Concrete used was prepared by replacing 75% of steel slag in replacement with sand and replacing cement by 5%, 10%, 15% and 20% with quarry dust. Also, conventional concrete was prepared as reference concrete for comparison. 100-mm cube and 100 mm × 100 mm × 500 mm …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 8–13 Read article