Search
64 articles for “friction”
-
A Review of Recent Developments in Solid State-Based Metal Additive Manufacturing: Friction Stir Additive Technique
Abstract: In the age of machines, the whole industry needs light-weight and high strength for lighter devices, machines, etc. The core aerospace industry needs lighter materials for satellites and rockets. Friction Stir Additive Technology (FSAT)represents an innovative approach aimed at leveraging the principles of layered build (AM) layer by layer using solid state (FSW) friction stir welding technology. These represent a particular class of friction-based additive technology (FAT) and can easily …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 2, 2022 · pp. 17–25 Read article
-
Experimental Study and Analysis of Coefficient of Friction for Mild Steel Under Various Lubrication Conditions
Abstract: The coefficient of friction plays decisive role in the metal-forming processes. This study focuses on determination of the coefficient of friction between work piece and lubricants using ring compression test by experiments physical modeling and finite element (FE) simulation. A series of ring compression tests were carried out to obtain friction coefficients of mild steel under lubricants including boric acid, Vaseline, grease and dry conditions. According to Male and Cockcroft …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 2, 2018 · pp. 34–42 Read article
-
A look at friction stir processing for making better surface properties
Abstract: Abstract Friction stir processing is a surface properties modification method consequential from friction stir welding. The process uses a non-consumable tool made up of tool steel material. The tool pin and shoulder plunged in the surface of the base material plates and it mover along the predetermined path. The frictional heat stimulates the plastic deformation during the process & enhances the dynamic recrystallization. The process represents an advanced approach that …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 41–47 Read article
-
Comparison and Analysis of Seismic Behavior of Multistoried RCC Building with Friction Dampers and Fluid Viscous Dampers
Abstract: This paper deals with effect of position and number of friction dampers on response of 2D frame. To fulfill this objective, five bay and fifteen story 2D frame is analyzed using software ETABS-2017. The study is carried out using two, three and four number of friction dampers with different locations keeping slip load and stiffness constant. As the behavior of friction damper is elasto-plastic, the Nonlinear time history analysis of …
Published in International Journal of Structural Engineering and Analysis · Vol. 8, Issue 1, 2022 · pp. 34–39 Read article
-
Analysis of Side Friction Impacts on Urban Road Links
Abstract: With development in population and vehicular thickness in metropolitan zones in agricultural nations,metropolitan streets present a negative picture with streets not having the option to take into accountthe limit with respect to which they are intended for, expansion in vehicular populace and blockagealongside lack of metropolitan street space is showed as street side contacts. Side friction factors arethe activities identified with the exercises that happen at the edges of the …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 7, Issue 1, 2021 · pp. 7–14 Read article
-
Investigation of Tangential Shear Stress and Frictional Torque Coefficient over a Rotating Disk of the Rotor-Stator System
Abstract: Abstract The study investigates the prediction of tangential shear stress and the frictional torque coefficient over a rotating disk in a rotor-stator system under laminar inward flow conditions. The interaction between the rotating and stationary disks is governed by key parameters, such as volumetric flow rate, rotational speed of the disk, and the axial clearance between the two surfaces. These parameters are expressed in terms of dimensionless quantities, including the …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 11, Issue 1, 2025 · pp. 6–14 Read article
-
Finite Element Analysis of Composite Pressure Vessel with Non-Geodesic Fiber Trajectory In view of Friction Factors on Cylinder and End Domes
Abstract: Composites are materials created by dissimilar materials with a view to improve the properties or to create materials with desired properties. Progressive Fiber Polymer Composites have developed as an essential class of industrial materials for load carrying applications with well-rounded properties for many industrial and social applications. Structures like pressure vessels, pipes and motor casings made-up of Filament Winding technology are widely used in aerospace applications. Conventionally, pressure vessels were …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 9–21 Read article
-
Parametric Analysis of Reciprocating Friction and Wear Behavior of PTFE Composite.
Abstract: When filler materials like carbon, graphite, glass fibres are added in the PTFE, a composite is formed which improves mechanical & thermal properties of that composite. It increases hardness and wear resistance, while the coefficient of friction is slightly affected and remains low. In this survey, we study various papers in which various methods & experiments were carried out for calculating friction & wear resistance of various compositions of polymers. …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 55–61 Read article
-
Rural Building Base Isolation for Seismic Protection Using LRB and Friction Isolator
Abstract: Over 50% of the population of India, which is still developing, lives in unreinforced masonry buildings. Masonry constructions perform poorly and can collapse suddenly because they are susceptible to seismic loads and loads acting out of plane. Building collapse not only destroys public property but also claims life. It has been demonstrated that base isolation approaches for these types of structures are advantageous; in the event of seismic forces, they …
Published in International Journal of Structural Engineering and Analysis · Vol. 8, Issue 2, 2022 · pp. 38–42 Read article
-
INVESTIGATE THE BULGING EFFECT OF METALLIC SOLID CYLINDER UNDER COLD UPSETTING USING FINITE ELEMENT ANALYSIS
Abstract: Friction is an integral part of metalworking and manufacturing processes due to the relative motion and forces continually acting on tools, dies, and workpieces. Friction both raises the effort and consumes energy. However, measuring friction is not straightforward and cannot be considered an independent parameter. In many metal-forming procedures, the impact of friction is just as crucial as other quantifiable factors. Various methods have been used to estimate friction, assuming …
Published in International Journal of Computer Aided Manufacturing · Vol. 8, Issue 2, 2022 · pp. 7–18 Read article
-
Friction Stir Processing & Aging on Fatigue Properties of Different Alloy: A Review
Abstract: The FSP process is a thermo mechanical processing techniques which is carried out by means of pin tool that will heat and mechanically deformed the material. FSP has been developed to produce UFG by applying compressive load with a suitable Tool. To enhance the mechanical properties like strength, fatigue, hardness as well as other properties like optical, electrical, magnetic the microstructure is that decides them. We refine grains by large …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Study the effect of lubrication on hardness in the ring compression test
Abstract: Mild Steel is commonly used to produce automotive parts such as shafts, gears and bearings. This paper focuses on the hardness distribution in the mild steel ring specimen after compress under rigid dies. Three different types of lubricants namely boric acid, Vaseline, grease and dry condition were employed as lubricants and the coefficient of friction corresponding to the lubricant evaluated using standard ‘Ring compression test’. The strain distributions obtained from …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 18–27 Read article
-
International Journal of Manufacturing and Materials Processing
Abstract: Friction and wear resistance were studied on SiC-based novel ceramic composite for applications in advanced automotive braking systems. In the present work, SiC-based ceramic composite was prepared by solid-state reaction synthesis route using a fine powder of precursors. The product was investigated for wear rate under different load conditions in the range from 10N to 70N and speed conditions in the range from 0.13 m/s to 0.52 m/s. The present …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 14–24 Read article
-
Experiments to Record the Capillary Flow of Dyed Waterin SU-8 based Glass Microfluidic Devicestowards the Fluidic Phenomena
Abstract: In this experimental work, a set of three individual leakage-free SU-8 based glass microfluidic devices are fabricated by maskless lithography and proper indirect bonding technique. Dyed water(50% distilled water, 50% red dye) is prepared and used as working liquid. The microfluidic leakage is experimentally demonstrated in other set of two leaky microfluidic devices due to improper indirect bonding technique. The effect of surface-to-volume ratio on surface-driven capillary flow of dyed …
Published in International journal of Nanobiotechnology · Vol. 6, Issue 1, 2020 · pp. 13–19 Read article
-
Effect of Piston Diameter on Internal Combustion Engine Having Six Cylinders
Abstract: Earlier as in the case of petrol or diesel engine when more power is required or if there are some kind of unwanted exhaust emission then oversized pistons are used which are generally larger in diameter as compared to standard one. This paper mainly based on change in performance of the internal combustion engine having six cylinders by changing the diameter of piston. This paper compares various piston diameter performance …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 6, Issue 2, 2020 · pp. 7–10 Read article
-
The New Era of Fusion and Solid-State Joining: A Review of Latest Welding Techniques and Applications
Abstract: Abstract This review examines the quickly changing field of solid-state joining and welding technologies, emphasizing new developments, practical uses, and future research avenues. Strategies that lower heat input, enhance joint integrity, and allow the connecting of sophisticated and dissimilar materials have gained importance within the last ten years. Solid-state techniques are particularly appealing for lightweight alloys used in the automotive and aerospace industries because they reduce melt-related defects and the …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 35–40 Read article
-
Experimental Investigation of FSW on Al 6061-T6 MG Dissimilar Joints
Abstract: Friction Stir Welding (FSW) is a solid-state joining technique that has shown significant potential for welding dissimilar materials, such as aluminum and magnesium alloys, which are difficult to join using conventional fusion welding methods due to large differences in their physical, thermal, and metallurgical properties. During FSW, contact between the rotating, wear-resistant tool shoulder, the pin, and the work piece produces frictional energy. Additional thermal energy develops because of intense …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
A Study to Assess the Effectiveness of Anxiety and Physiological Parameters Among Elderly in Selected Old Home, Coimbatore
Abstract: An experimental study with a two-group pretest and posttest design was conducted to evaluate the effectiveness of massage therapy on anxiety and physiological parameters among elderly adults residing in Annai Mother Therasa Old Age Home, Coimbatore. The study included 40 participants selected through simple random sampling and assigned equally to experimental and control groups. Data were collected using a Socio-Demographic Data Sheet, the State-Trait Anxiety Inventory (STAI), and physiological measures, …
Published in International Journal of Geriatric Nursing · Vol. 8, Issue 2, 2025 · pp. 13–29 Read article
-
Optimization of Wear Parameters for Medical ImplantApplications
Abstract: The purpose of the present research is to check the capability of SS 304 for the application of medicalimplants and describe the influence of sandblasting process, applied load, frequency, and slidingdistance on the coefficient of friction of SS 304. In this research, attempts have been made to study thewear behavior of SS 304 under various conditions. In the tribology lab, a wear test was carried out inaccordance with the scheme …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Optimization of Wear Parameters for Medical Implant Applications
Abstract: The purpose of the present research is to check the capability of SS 304 for the application of medical implants and describe the influence of sandblasting process, applied load, frequency, sliding distance on the coefficient of friction of SS 304. In this research, attempts have been made to study the wear behavior of SS 304 at various conditions. In the tribology lab wear test was carried out in accordance with …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article