Search
14 articles for “epoxy matrix”
-
Mechanical and Thermal Characterization of Natural Fiber-Reinforced Epoxy Composites for Structural Applications
Abstract: Natural fiber reinforced polymer (NFRP) composites have emerged as promising alternatives to conventional synthetic fiber composites owing to their environmental sustainability, low density, and competitive specific mechanical properties. However, a comprehensive and simultaneous evaluation of both mechanical and thermal performance of jute/sisal hybrid natural fiber epoxy composites under systematic fiber treatment conditions remains insufficiently addressed in the literature. The present study investigates the mechanical and thermal characterization of jute and …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 37–48 Read article
-
Interfacial Engineering and Performance Optimization of Jute-Fiber-Reinforced Epoxy Laminates
Abstract: The increasing environmental concerns associated with synthetic fiber reinforced polymer composites have driven substantial research interest toward naturally derived, biodegradable fiber alternatives. This study presents a comprehensive mechanical and thermal characterization of jute fiber reinforced epoxy composites fabricated via hand lay-up followed by compression molding. Jute fibers were subjected to alkali treatment using 5 wt% sodium hydroxide (NaOH) solution for 4 hours at ambient temperature to enhance fiber–matrix interfacial bonding …
Published in International Journal of Polymer Science and Engineering · Vol. 12, Issue 1, 2026 · pp. 52–64 Read article
-
Development of Epoxy Based Hybrid Composite Reinforced with Jute and Glass-fiber and Effect of Silicon Carbide additive on it’s Mechanical Properties
Abstract: In this project, an effort is made to compare the improvement of the matrix material properties because of the presence of the fillers and additives. Initially, hand lay-up process was carried out in a mold of known dimensions to layup jute fibers of varying weight percentages in the epoxy matrix. Another composite with glass fibers of similar weight percentages to that of jute were laid up in epoxy matrix in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 8–12 Read article
-
Influence of Surface Treatments on the Adhesion of Plant Fibers to Epoxy Resin
Abstract: Because of their primary benefits, moderate strength and stiffness, low cost, and the fact that they are a renewable, biodegradable, and environmentally safe material, natural fibers are seen to have potential use as reinforcing agents in polymer composite materials. Since they are inherently hydrophilic, moisture can easily build up on them, weakening or plasticizing the fibers’ adhesion to the surrounding matrix and affecting the performance of composite materials used in …
Published in International Journal of Agrochemistry · Vol. 11, Issue 1, 2025 · pp. 12–24 Read article
-
Status of Composite Materials in Automobile Sector
Abstract: Composite materials may someday have big advantages over steel in automobile manufacturing. Composites are being considered to make lighter, safer and more fuel-efficient vehicles. A composite is composed of a high-performance fiber (such as carbon or glass) in a matrix material (epoxy polymer) that when combined provides enhanced properties compared with the individual materials by themselves. Carbon-fiber composites weigh about one-fifth as much as steel, but are as good or …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 27–30 Read article
-
Experimental verification of strength of glass fiber reinforced polymer matrix composites
Abstract: An experimental investigation has been carried out to develop a new PMC (Polymer Matrix Composite) using commercially available Epoxy and Polyurethane resin systems. These resin systems would be reinforced with glass fibers, filler materials and aluminium foils. The laminates have been prepared by using the hand lay-up technique for eight layers and the mechanical tests such as tensile and compression test have been conducted for the PMC. This work has …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 3, Issue 1, 2017 · pp. 43–51 Read article
-
MWCNT AND GRAPHENE FOR IMPROVED CORROSION RESISTANCE OF MILD STEEL
Abstract: ABSTRACTThe protective coating method is a passive corrosion protection technique. The protective coating detaches the metallic surfaces from the aggressive media, such as moisture, salts, acids etc. Nanotechnology is a relatively modern development in scientific research, the development of this concept occurred over a very short period of time. One technique that has recently been used to increase the adhesive and anti-corrosive properties of polymer coatings is the addition of …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 12–17 Read article
-
A Study on Evaluation of Mechanical Properties of Reinforced Composite Developed Using Corn Husk and Glass Fibre
Abstract: With the increasing demand for the disposal of polymer wastes and environmental waste from agriculture/ farming, this research aims to develop composite materials by using glass fibre and corn husk fibres by hand lay-up technique. The fibre from the maize husk was extracted and then overlapped on glass fibre cloth films in regular or irregular orientations. The reinforcement is done with the epoxy resin. The reinforcement and harden matrix are …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 32–36 Read article
-
Sustainable Cementitious Composites withEpoxy–Alccofine Synergy
Abstract: This research examines the combined influence of epoxy resin and Alccofine when used as partial substitutes for cement in producing sustainable, high-performance concrete. The study aims to improve both strength and durability properties while simultaneously reducing cement usage and its environmental impact. Concrete mixes were prepared with epoxy resin contents of 0%, 5%, and 10% by weight of cement, along with Alccofine replacement levels of 5%, 10%, and 15%. The …
Published in International Journal of Concrete Technology · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Experimental Study on Mechanical Properties of E-glass Fiber and Epoxy Resin Hybrid Composite Material
Abstract: Hybrid composites occupying the area of standard materials by satisfying the necessities of various sectors like part industries, automobile industries, ship building and numerous bio-medical sectors. the most reason to substitute standard materials is that the hybrid composites giving same or additional needed properties with less weight and value than standard materials and most output in minimal consumption with higher lifespan to seek out the economical suggests that of utilizing …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 20–36 Read article
-
The advanced composite materials production by new method using the process of vibro-turbulization
Abstract: Typically, the methods of composite materials production, such as epoxy bases, include preparing a binder by mixing a hardener, a solvent and an epoxy resin, infusing a fibrous or powder filler with a binder, and hardening by heating under pressure. These methods do not permit to reach the main goal of the production of advanced composite materials with a basis (matrix) filled by uniformly dvistributed fibrous or powder filler (armoured …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 1–4 Read article
-
Advanced Techniques for Delamination Toughening in Carbon Fibre Reinforced Composites
Abstract: Carbon fibre reinforced composites are widely used in various industries due to their excellent strengthto-weight ratio and stiffness properties. However, one of the major issues in these composites is delamination, which occurs due to the weak interlaminar bonding between the layers of fibers and matrix. Delamination leads to a reduction in the load-carrying capacity and structural integrity of the composite. To address this issue, several advanced techniques for delamination toughening …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 49–55 Read article
-
A Review on Polybutadiene Rubber Composites
Abstract: Rubber composites are crucial materials that obtained by the combination of two or more components i.e. rubber and filler, comprising with different fundamental properties. The composites are lighter yet stronger materials in nature with intermediate characteristics of both the initial ingredients. Polybutadiene rubber (PBR) is one of the highly produced global synthetic rubber having significant industrial applications. PBR composites showed improved physical, mechanical and thermal properties, with greater strength, resistance …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 1–19 Read article
-
Fatigue Performance of Carbon Fiber Reinforced Hybrid Nanocomposites Modified Using Core-Shell Rubber Particles and Nanosilica
Abstract: This study investigates the fatigue behavior of carbon fiber-reinforced epoxy composites modified with nanosilica, core-shell rubber particles, and a hybrid of both additives. Specifically, the composites were formulated with 10 wt% nanosilica, 10 wt% core-shell rubber particles, and a hybrid containing 10 wt% of each additive. The research aimed to assess how these modifications influence the mechanical performance and fatigue resistance of the composites under cyclic loading conditions. The addition …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 8–20 Read article