Search
14 articles for “compatibilizer”
-
Influence of Compatibilizers on the Morphology, Mechanical, Thermal andRheological Properties of Polypropylene/Organomuscovite Nanocomposites
Abstract: In this study, the effects of two different compatibilizer types-maleated polypropylene and hexamethylenediamine modified maleated polypropylene-on the characteristics of a polypropylene/maleated polypropylene/organo-muscovite clay nanocomposite were investigated. By combining polypropylene with three different levels of organo-muscovite clay content, two distinct compatibilizers were used to make the nanocomposites, each with a fixed amount of 10 weight percent. The compatibilizer's effects on the morphological, mechanical, thermal, and rheological characteristics of nanocomposites were then …
Published in International Journal of Applied Nanotechnology · Vol. 10, Issue 1, 2024 · pp. 25–36 Read article
-
Effect of Compatibilizers on Polypropylene-Based Peanut Shell Flour Composites Reinforced with Nanoclay
Abstract: The improvement of innovative ingredients is on the rise, especially in the automobile, aerospace, aviation, and construction industries. Conventional ingredients are being substituted with nanocomposite ingredients due to their excellent features. In this study, various composites based on polypropylene (PP), peanut shell flour (50 wt% PSF), and nanoclay (Cloisite 30B) were manufactured by melt mixing process followed by injection molded in the presence of maleated PP (PPM) and maleated styrene …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 2, 2022 · pp. 1–13 Read article
-
Compatibilizing Effect of Modified Polypropylene on the Properties of Polypropylene/Organically Modified Layered Silicate Nanocomposites
Abstract: In the present research paper, a series of polypropylene (PP) nanocomposites containing 3, 5, and 7 wt% of an organically modified layered silicate (OM) were prepared via direct melt mixing in the presence of maleic anhydride grafted polypropylene (indicated as PP-g-MA, PPMA), and hexamethylenediamine-modified maleic anhydride grafted polypropylene (marked as PP-g-HMDA, PPHMDA) as compatibilizing agent at concentration of 10 wt%. Subsequently the influences of the compatibilizer on the morphological, mechanical, …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 8–19 Read article
-
Influences of Layered Silicate Modification and Compatibilizers on the Properties of Polypropylene Nanocomposites
Abstract: In this study, polypropylene (PP) organo-layered silicate nanocomposites based on organo-muscovite (OM) were fabricated using co-rotating twin-screw extruder. Polypropylene grafted maleic anhydride (PPMA) and potassium succinate modified polypropylene grafted maleic anhydride (PPKS) were used as a compatibilizer in the nanocomposite system. The influences of layered silicate modification and compatibilizers on the morphological, mechanical, thermal and rheological features of PP/PPMA/OM and PP/PPKS/OM nanocomposites were examined. TEM micrographs were made which showed …
Published in International Journal of Chemical Engineering and Processing · Vol. 7, Issue 1, 2021 · pp. 36–44 Read article
-
Effects of Compatibilizer and Paper Sludge Content on the Performances of Thermoplastic Polymer Composites
Abstract: One of the environmental issues affecting third-world countries is the economic use of lignocellulose waste, which is now being researched. Paper sludge (PS) composites will allow for the effective use of a waste material that is currently burned or buried, as well as the ability to lower the cost of the composite that is created. In this study, the mechanical and thermalcharacteristics of environmentally friendly composites constructed from PS-reinforced recycled …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 10–21 Read article
-
Effects of Industrial Waste Filler Content and Compatibilizer on the Performance of Thermoplastic Polymer Composites
Abstract: In this study, we examine the physico-mechanical characteristics of waste filler-thermoplastic polymer composites in relation to the industrial waste filler mixing ratio and compatibilizer concentrations. Three degrees of coupling agent (Epolene E-43) content and four levels of waste filler to thermoplastic polymer mixing ratios were used in the experiment to examine the physical and mechanical characteristics of the composite. As was to be predicted, composite density grew as waste filler …
Published in International Journal of Applied Nanotechnology · Vol. 9, Issue 2, 2023 · pp. 12–21 Read article
-
Investigating the Impact of Silicate Modification on Polypropylene-Layered Silicate Nanocomposite
Abstract: In this research, a co-rotating twin-screw extruder was used to create polypropylene/organo-layered silicate nanocomposites based on organo-muscovite. In the nanocomposite system, compatibilizers such as polypropylene grafted maleic anhydride and potassium succinate modified polypropylene grafted maleic anhydride were employed. The morphological, mechanical, thermal, and rheological characteristics of polypropylene/polypropylene graftedmaleicanhydride/organo-muscovite & polypropylene/potassium succinate modified polypropylene grafted maleic anhydride/organo-muscovite nanocomposites were investigated in relation to the effects of layered silicate modification and compatibilizers. …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 10, Issue 1, 2024 · pp. 47–54 Read article
-
Effect of Coupling Agent on Organoclay Dispersion in Polyethylene/Organoclay Nanocomposites for Packaging Industry
Abstract: Low-density polyethylene (LDPE) is one of the most widely used polymers in various fields, but due to the hydrophobic nature of LDPE, it is hard to prepare an LDPE/clay nanocomposite. In this article, an LDPE/organoclay nanocomposite, which can be used in the packaging industry, was prepared by melt-blending organoclay with a polymer matrix (LDPE) and compatibilizer, low molecular weight oxidized polyethylene. The influences of organoclay, and compatibilizer during melt mixing …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 1–11 Read article
-
Production and Evaluation of Composites Made from Waste Material and Recycled Poly(Ethylene Terephthalate)
Abstract: A significant ecological concern that third-world countries are currently facing is the economically viable use of lignocellulose waste. In addition to reducing the cost of the composite, cellulosic fiber composites created from industrial waste would enable the efficient use of a waste material that is presently disposed of or burned. Recycled poly (ethylene terephthalate) was used in this work as a major phase (matrix) and industrial waste material was used …
Published in International Journal of Energetic Materials · Vol. 11, Issue 1, 2025 · pp. 1–12 Read article
-
Study of Dynamic Mechanical and Thermal Properties of Poly(Ether Ether Ketone) Carbon Nanotubes
Abstract: The effect of polyetherimide (PEI) as a compatibilizing agent on the morphology, thermal, electrical and dynamic-mechanical properties of poly(ether ether ketone) (PEEK)/single-walled carbon nanotube (SWCNT) nanocomposites, has been investigated for different CNT loadings. After a pre-processing step based on ball milling and premixing under mechanical treatments in ethanol, the samples were prepared by melt extrusion. A more homogeneous distribution of the CNTs throughout the matrix is found for composites containing …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 1–21 Read article
-
Organically Modified Peanut Shell Flour-Reinforced Polypropylene Nanocomposites: Effect of Fiber Surface Treatment on Basic Properties
Abstract: Innovative composite ingredients are increasingly being used, particularly in the automotive, aerospace, aviation, and construction industries. Due to the remarkable properties of nanocomposite components, traditional ingredients are being replaced. This study's work focuses on the usage of polypropylene (PP) as polymer matrices and nanoclay and peanut shell flour (PSF) as reinforcing materials. To enhance the mechanical properties of the PP/PSF composites in the present work, PSFs were treated using sodium …
Published in International Journal of Analytical and Applied Chemistry · Vol. 8, Issue 2, 2022 · pp. 19–30 Read article
-
Effect of Nanoclay on the Performance of Calotopis Gigantea Fiber Reinforced Thermoplastic Composites at Distinct Temperature
Abstract: Polymer-based nanocomposite is a developing subject that attracts many researchers due to its special qualities and versatility. Because the specific surface areas of nanofillers in nanocomposites are so high, it is much simpler to produce mechanical properties at the interface. Furthermore, a favorable interaction between the nanofillers and polymer matrix may manifest itself even at comparatively lower percentages of loading nanofillers. Thus, a smart, adaptive polymer nanocomposite material with the …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Study on Mechanical and Physical Properties of Wood-Plastic Nanocomposites after Fiber Surface Treatment
Abstract: Numerous composites based on high-density polyethylene (HDPE), wood flour (WF), and nanoclay (Cloisite 30B) were prepared by melt compounding followed by injection mold. This paper aims to evaluate the feasibility of using HDPE and underutilized WF as a material for the development of woodplastic composites, as well as the strengthening effect of nanoclay on them. To develop the poor interfacial interaction between the hydrophilic WF and hydrophobic HDPE matrix, as …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 43–53 Read article
-
Thermal, Mechanical, Morphological and Rheological Behavior of HDPE and Algae Based Polysaccharide Blend
Abstract: The use of renewable resource based materials as filler for thermoplastic polymers showed wide scope in agriculture, textile and commodity applications due to low cost and high mechanical properties. In this work marine red algae based polysaccharide was used as a filler material for high density polyethylene (HDPE). The polysaccharide extracted from marine based red algae is a byproduct of algae to oil extraction process. The blends were prepared using …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 35–44 Read article