Search
28 articles for “chemical powders”
-
Development of Smart Fire Extinguishing
Abstract: The invention of smart fire extinguishing agents, which satisfy the growing need for efficient, eco-friendly, and adaptable fire suppression systems, is a significant advancement in fire safety. Traditional fire extinguisher chemicals, such as water, foam, and chemical powders, are effective, but they often have disadvantages, including toxicity, negative environmental effects, and inefficiency in difficult situations. Conversely, smart extinguishing agents maximize fire suppression through intelligent, tailored responses by utilizing advancements in …
Published in International Journal of Environmental Chemistry · Vol. 11, Issue 2, 2025 · pp. 1–19 Read article
-
Modification of Solar Hot Water Heating System
Abstract: In optoelectronics system, the copper sulfide powder plays an important role as a thin film layer. This paper covers fabrication of Copper sulfide (CuS) Powder and its characterization. The fabricated Copper sulfide powder gives better result as compared to commonly used Copper sulfide (CuS) available in the market. In this experiment, the Copper sulfide powder (CuS) was coated on the tubes as a thin film and measured the outlet water …
Published in International Journal of Water Resources Engineering · Vol. 9, Issue 1, 2023 · pp. 33–39 Read article
-
Density as a Factor Limiting the Workability of Sintering Aluminum Powder Preforms
Abstract: The technology advancement has envisaged going for near net shape of the produces. Also, near netshapes formed are again cold upset for obtaining a final shape of the Product.In this study a general scheme expressing the factors which affect a workability of Sintering aluminium powder preforms. This work deals with an experimental determination Workability of Sintering Aluminium powder preforms is limited by their density. A standard of rings of ratio …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 1, 2018 · pp. 40–43 Read article
-
OPTIMIZING MAGNETIC BEHAVIOR OF NANO-CRYSTALLINE CO2CrAl TYPE HEUSLER ALLOY POWDER USING RESPONSE SURFACE METHODOLOGY
Abstract: In the present work, Co2CrAl heusler alloy powder prepared successfully from premix basic powders of Cobalt (Co), Chromium (Cr) and Aluminium (Al) in stoichiometric of 60Co-26Cr-14Al (weight %) by novelistic mechano-chemical route. Mgnetic properties of mechanically alloyed powders were characterized by vibrating sample magnetometer (VSM). The performed experiment has been designed on the basis of 2 factor 5 level response surface methodology. Experimental results were used to develop a mathematical …
Published in International Journal of Energetic Materials · Vol. 6, Issue 1, 2020 · pp. 7–13 Read article
-
Sugar Powder Impact on Strength of Concrete
Abstract: Abstract This experimental study examines the effect of adding sugar powder to concrete on its compressive strength. The research explores how sugar powder, when used as an additive in concrete mixtures, alters the concrete’s structural performance, particularly in terms of its ability to resist compressive forces. Through systematic testing and analysis, the study aims to determine the extent to which sugar powder can influence the strength and durability of concrete, …
Published in International Journal of Concrete Technology · Vol. 11, Issue 1, 2025 · pp. 15–21 Read article
-
Eco-friendly Color Production for Holi Celebration: A Mini Review
Abstract: Many synthetic colours formed from chemicals have adverse effects on environment. Biocolours are nowadays used in holi festival. Colours are also becoming integral part of modern day life. Use of colours are becoming a part of our everyday life. There is need of nontoxic colours in order to remove substances like lead, cadmium, chromium and cobalt entering in the food chain. Biocolours are mainly prepared from plant origins. The current …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 8, Issue 1, 2022 · pp. 7–12 Read article
-
Functional Rubber Particles and Their Applications- A Review
Abstract: Functional rubber powders (FRPs) are emerging as a potential class of materials derived primarily from end-of-life tires (ELTs) and other rubber scraps through mechanical, cryogenic, or de-vulcanization methods. These powders act as high-performance additives or reinforcing fillers in various engineering applications due to their low cost, improved surface properties, customizable particle sizes, and ability to undergo further chemical reactions. This review provides an overview of the production technologies, focusing on …
Published in International Journal of Chemical Separation Technology · Vol. 11, Issue 2, 2025 · pp. 8–16 Read article
-
The new method of mixing in an advanced ceramics processing
Abstract: Ceramics for today’s engineering applications can be considered as advanced, new or fine, and utilize highly refined materials. These new or advanced ceramics, when used as an engineering material, possess several properties which can be viewed as superior to metal-based systems. These properties place this new group of ceramics in a most attractive position, not only in the area of performance but also cost effectiveness. These properties include high resistance …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 1, 2019 · pp. 43–47 Read article
-
Aerogel from Ceramic Composite
Abstract: This article is written from conferred articulated forms of aerogel. Sol-gel is a usual method toprepare aerogel. Compromise of inherent fragile mater under extensive moisture absorption tendencyof silica network has mitigated after inclusive of polyhedral oligomeric silsesquioxane (POSS)molecule. Long term applicability of silica aerogel has cited to confer superhydrophobic and flexibleconfigure based on synthesis by the catalysed sol-gel process; in accord of usual two-step method ofacid activation followed by basic …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 7, Issue 1, 2021 · pp. 1–12 Read article
-
Synthesis and Characterization of Polyurethane in Powder Form
Abstract: Polyurethanes (PUs) are defined as a class of versatile materials with great potential for use in different applications, especially based on their structure-property relationships. Their specific mechanical, physical, biological, and chemical properties are attracting significant research to tailor made PUs for various applications. Enhancement of the properties and performance of PU-based materials are achieved through altering the production process or the raw materials used in their fabrication or via the …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 4, Issue 2, 2018 · pp. 22–27 Read article
-
Synthesis of Nano-ZnO by Chemical Method and its Characterization
Abstract: Nanocrystals of ZnO were prepared by chemical method using Zn (II) acetate and potassium hydroxide as the starting materials and methanol as solvent. The material was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), electron diffraction analysis (EDS), UV-Visible spectroscopy, Dynamic light scatteringanalysis (DLS) and Fourier transform spectroscopy (FTIR) techniques. The results indicated that the obtained ZnO material was in nano-dimension and possessed pure …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 8, Issue 1, 2022 · pp. 13–18 Read article
-
Pyrolysis Characteristics and Isoconversional kinetics of kusum deoiled seedcake.
Abstract: The pyrolysis characteristics and kinetics of kusum de-oiled seed cake were conducted using a Thermo gravimetric analyzer. Thermogravimetric analysis of biomass was carried out at three different heating rates of 10, 20, 30, ̊ C/min from 28 ̊ C to 1000 ̊ C under N2 atmosphere. The results indicated that the biomass was decomposed in the temperature range of 270 ̊C to 520 ̊ C and further decreased when temperature …
Published in International Journal of Environmental Chemistry · Vol. 2, Issue 2, 2016 · pp. 9–17 Read article
-
Significance of RDX – A Highly Explosive Energetic Material
Abstract: Plastic demolition explosives containing RDX and PETN as major energetic components. Torpex: 42% RDX, 40% TNT, and 18% powdered aluminium. The mixture was designed during World War II and used mainly in underwater ordnance. It is made from other chemicals known as hexamine, ammonium nitrate, nitric acid, and acetic acid. A small amount of HMX is also formed in making cyclotrimethylene-trinitramine (RDX), another explosive similar in structure to HMX. Composition …
Published in International Journal of Energetic Materials · Vol. 3, Issue 2, 2017 · pp. 23–26 Read article
-
STUDIES ON TALC
Abstract: This article is a review on talc in short form to study elementary schemed fame. Talcum powder is a mixture of talc and other silicates. Powder form of talc has scriptive issued as two types, given by, industrial and cosmetic grades, for usage in paper, plastics, rubber, paint, and cosmetic manufacture. Talc has been soft and commonly used mineral and considered inert, and produces no reaction, when used on skin. …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 7, Issue 2, 2021 · pp. 1–9 Read article
-
Developments of Glass-Ceramics in Modern Scenario
Abstract: This article is a study on glass science and methods to achieve esteem. Synthetic protocols has been implacable secure to obtain glass-ceramic properties. First glass-ceramic capability has been introduced by Stookey in 1950s’. His excellence has reticulated control on devitrification of glass by adding nucleating agent i.e. TiO2 in 1960s’. Extendable pursue has rated score depending on sinter philosophy on glass-ceramics as well former scripture that has been etiquette of …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 23–31 Read article
-
Essential of bearing in materials engineering
Abstract: Essentials of bearing have been to maintain lubricant film to prevent metal to metal contact and hence local welding of two surfaces. Tribological and mechanical properties have improved by powder metallurgy route of bearing fabrications. Alloyed non-ferrous plane bearings have better friction coefficients than pure metals. Betterment has appeared in babbit/ bronze particulate reinforced composites. Ni addition has improved performances of graphite-lead free tin bronze composite layers on surface of …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 1–17 Read article
-
Emulsion Paint Formulation from Black Seed Powder/Soya Bean Oil Copolymer Binder
Abstract: The study focused on creating a water-based paint using a locally accessible pigment (black seed powder) and soya bean oil. Soya bean oil’s hydrophobicity is incorporated into the paint matrix. The physical and mechanical qualities of the developed emulsion paint were tested. Results were positive for tackiness, stability, blistering, flexibility, and chemical resistance. Physical parameters measured included pH (8.35), density (1.09 g/cm3), viscosity (4.2 m2/s), opacity (4.8 m2/l), drying time …
Published in International Journal of Environmental Chemistry · Vol. 12, Issue 1, 2026 · pp. 47–52 Read article
-
Developments of Photonic Ferroelectric Ceramic Compose
Abstract: This article is a study of imposed interposed crystal allotropic modification underexposure of electricity. Ferroelectric photonic ceramic powder and films are usual studied in preparation from adoptive transduction in the same crystal based on electrical gradient. Ferroelectric ceramics and thin films used to be processed by the sol-gel method, where empirical variables of interest have been their chemical composition, constituent phases, and microstructure. Functional attributes made metal oxide compose like …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 37–44 Read article
-
Extraction,Characterization and Optimization of pectin from Banana peel by using Acid Extraction
Abstract: This paper basically focused on the production of pectin from banana peel, an agricultural waste. The production process used in this work was raw material collection from Hawassa City, and characterizing the raw material for its physic-chemical composition. The raw material was prepared and grinded to a averageparticle size of 0.25mm after drying at a constant temperature of 600C. The extraction of oil from the banana peel was conducted using …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 2, 2020 · pp. 27–48 Read article
-
Sequential Extraction of Pectin and Cellulose from Orange Peel Waste: A Sustainable Waste-to-Valorization Approach
Abstract: Agricultural waste is a huge and underutilized resource of useful biomaterials that are best for sustainable use. The goal of the present study was to develop an integrated waste valorization approach, in which orange peel waste is valorized in the form of cellulose and pectin and their potential is assessed in combination with green synthesis of nanoparticles. Orange peel powder was treated with acid-assisted extraction to obtain pectin, and the …
Published in International Journal of Green Chemistry · Vol. 12, Issue 2, 2026 · pp. 19–29 Read article