Search
64 articles for “ceramics”
-
The new method of mixing in an advanced ceramics processing
Abstract: Ceramics for today’s engineering applications can be considered as advanced, new or fine, and utilize highly refined materials. These new or advanced ceramics, when used as an engineering material, possess several properties which can be viewed as superior to metal-based systems. These properties place this new group of ceramics in a most attractive position, not only in the area of performance but also cost effectiveness. These properties include high resistance …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 1, 2019 · pp. 43–47 Read article
-
Analytical Study of Ceramic Compositions: Lamination and Fracture Toughness
Abstract: This study investigates the characteristics and fabrication techniques of laminated ceramic composites, focusing on various glass-ceramic systems, including alumina, BaTiO3/Al2O3, and LiO2‐ZrO2‐SiO2‐Al2O3 (LZSA). The inherent brittleness of ceramics, attributed to surface flaws and their limited toughness, necessitates the development of layered structures to enhance mechanical reliability. Layered ceramics demonstrate improved fracture toughness, crucial for applications in aerospace, biomedicine, and military armor. Techniques such as tape casting, electrophoretic deposition, and advanced …
Published in International Journal of Analytical and Applied Chemistry · Vol. 10, Issue 2, 2024 · pp. 38–44 Read article
-
Developments of Glass-Ceramics in Modern Scenario
Abstract: This article is a study on glass science and methods to achieve esteem. Synthetic protocols has been implacable secure to obtain glass-ceramic properties. First glass-ceramic capability has been introduced by Stookey in 1950s’. His excellence has reticulated control on devitrification of glass by adding nucleating agent i.e. TiO2 in 1960s’. Extendable pursue has rated score depending on sinter philosophy on glass-ceramics as well former scripture that has been etiquette of …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 23–31 Read article
-
A Comparative Study of Ceramic Foam Filtration Methods in Metal Casting
Abstract: Ceramic foam filtration has emerged as a revolutionary technology in the metal casting industry, significantly enhancing the quality of cast products by effectively removing inclusions and impurities from molten metal. This study provides a comprehensive examination of the mechanisms underlying ceramic foam filtration, focusing on the interactions between the molten metal and the ceramic filter material. Various types of ceramic foams, including alumina, zirconia, and silicon carbide, are analyzed for …
Published in International Journal of Analytical and Applied Chemistry · Vol. 10, Issue 2, 2024 · pp. 21–27 Read article
-
The uniform fully dense ceramics processing
Abstract: Primary task in the process of advanced ceramics production is ceramic mixture with the uniform distribution of the densities of the components of this mixture. One of the stages of the process of advanced ceramics production the mixing is main instrument for the solution of this task. The existing methods of mixing do not permit in the sufficient form to produce uniform fully dense ceramics. This paper represents the application …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 30–35 Read article
-
Recent Trends in Bio Ceramic and Polymer Compositesfor Biomedical and Dental Applications
Abstract: Advanced biomaterials with great promise for use in dental and biomedical applications are bio-ceramic and polymer composites. These composites combine the flexibility, biodegradability, and processability of polymers with the mechanical strength, bioactivity, and biocompatibility of bio-ceramics. Clinical success is often limited by the biological response and tissue compatibility of conventional materials such as metals and single-phase ceramics. Oste conductivity and bone-like characteristics are exhibited by bio-ceramic materials, such as hydroxyapatite …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Revolutionizing Glass Science: Analyzing the Crystallization Dynamics of Economical Glass-Ceramic Compositions
Abstract: The development of glass-ceramics presents an innovative approach to material science, leveraging the unique properties of non-crystalline glass combined with controlled crystallization. This study investigates the crystallization dynamics of economical glass-ceramic compositions derived from raw materials, such as blast furnace slag and granite rock. We explore the fabrication processes, examining the influence of these raw materials on microstructural interlocking and phase composition. Our findings reveal that specific ratios of slag …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 10, Issue 2, 2025 · pp. 9–15 Read article
-
An Overview of Ceramic Matrix Composite
Abstract: Ceramic materials often exhibit a combination of useful physical and mechanical properties, including high refractoriness, but their applications are restricted due to their brittle behaviour; in an attempt to improve the strength, and particularly the toughness, of brittle ceramics particle-strengthening and fibre-reinforcement have been utilized, with limited success. The factors which affect the mechanical properties of these composite systems are discussed, and the various experimental systems that have been investigated …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 23–26 Read article
-
Modern Ceramic Compose to Pervade Electronics
Abstract: This article composed from articles where ceramics, photonics, and allied fame schemed. Scheme of materials is studied to transduce optical, electrical, mechanical, and magnetic phenomenon. Evolution of description at nanometer level of distributing from non-degenerating phases schemed ferrite in the ferroelectric matter to subject magnetic memory contravened from/by electrostatic to electrical current preserved memory acts. Suggestive selective scriptive as from magneto-electric effect induced dielectric polarization of material under effects of …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 11–16 Read article
-
Developments of Photonic Ferroelectric Ceramic Compose
Abstract: This article is a study of imposed interposed crystal allotropic modification underexposure of electricity. Ferroelectric photonic ceramic powder and films are usual studied in preparation from adoptive transduction in the same crystal based on electrical gradient. Ferroelectric ceramics and thin films used to be processed by the sol-gel method, where empirical variables of interest have been their chemical composition, constituent phases, and microstructure. Functional attributes made metal oxide compose like …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 37–44 Read article
-
Aerogel from Ceramic Composite
Abstract: This article is written from conferred articulated forms of aerogel. Sol-gel is a usual method toprepare aerogel. Compromise of inherent fragile mater under extensive moisture absorption tendencyof silica network has mitigated after inclusive of polyhedral oligomeric silsesquioxane (POSS)molecule. Long term applicability of silica aerogel has cited to confer superhydrophobic and flexibleconfigure based on synthesis by the catalysed sol-gel process; in accord of usual two-step method ofacid activation followed by basic …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 7, Issue 1, 2021 · pp. 1–12 Read article
-
Implications of ceramic – metal matrix compose
Abstract: AbstractThis article summarizes some formatives over WC-metal matrix composite surfacing on hard as well soft alloys. Composite surface has coated by laser, plasma and electroplating. WC-Ni composite has prepared by plasma transferred arc welding on steel surface. Thickness achieved from several mm on small parts to thin deposits on large surfaces. Cu-substrate accorded WC-Ni laser cladded deposition. Laser deposition of WC-Ni-NiCr on stainless has increased wear and erosion under flowing …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 31–37 Read article
-
International Journal of Manufacturing and Materials Processing
Abstract: Friction and wear resistance were studied on SiC-based novel ceramic composite for applications in advanced automotive braking systems. In the present work, SiC-based ceramic composite was prepared by solid-state reaction synthesis route using a fine powder of precursors. The product was investigated for wear rate under different load conditions in the range from 10N to 70N and speed conditions in the range from 0.13 m/s to 0.52 m/s. The present …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 14–24 Read article
-
Advancements in Material Science for Prolonging Service Life in Steam Turbine Components: A Review
Abstract: The longevity and performance of steam turbine components, which are essential assets in the infrastructure for power generation, are being greatly enhanced by advances in material science. This paper examines recent advancements made with the goal of using innovative materials and coatings to increase the longevity and effectiveness of turbine components. This review's scope includes an examination of cutting-edge materials, including composites, high-performance alloys, and ceramics, that are designed to …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 10, Issue 1, 2024 · pp. 23–28 Read article
-
Nano Finishing of HDPE/Al2O3/HAp Ternary Composite Based Acetabular Socket using Polymer Rheological Abrasive Semisolid Medium
Abstract: Acetabular socket is one of the important parts of the hip joint. The surface roughness in the acetabular socket decides the friction and wear during the motion of the human. Low surface roughness in the acetabular socket gives free motion of hip joint as well as high joint life. Nano surface roughness on the inner surface of acetabular socket also reduce the particles generation during the dynamic motion between hip …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 2, 2016 · pp. 5–8 Read article
-
Review on Recent Trends in Laser Assisted Machining of Hard to Cut Materials
Abstract: Laser-assisted machining (LAM), an alternative method of fabricating hard-to-machine materials, like ceramics, composites, Titanium alloy, Nickel based alloy are being developed and widely utilized in aerospace, automotive, medical and nuclear industries due to their special properties. These materials posing many challenges when machined with the help of Conventional methods of machining. Conventional methods of machining these materials are found to be uneconomical. Among the various external energy assisted machining methods, …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 2, 2021 · pp. 49–57 Read article
-
Nucleotides from radio-activated wastes
Abstract: AbstractThis article summarizes some formatives over waste generation in atomic reactors. Sponge or foam ceramics-in-glasses are used to entrap waste radio-nuclear products to dispose-in-pose scripture for other forms. Filtering has well known method to separate solid radio-in-nuclide forms from liquids even though inertia modes of resisting method has suggestive approaches to activate separation of particles by mass from sensing systems. Analysis of wastes has showed either ceramic particulates or particle …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 2, 2020 · pp. 1–5 Read article
-
Revolutionizing Bone Grafting: A Survey of 3D Printed Solutions
Abstract: Due to the limits of conventional grafts, large bone deficiencies resulting from illness or trauma continue to be a significant clinical challenge. Autografts, while osteoconductive and osteoinductive, are limited by donor availability and morbidity, and allografts/xenografts carry risks of immune rejection and disease transmission. In contrast, 3D printing (additive manufacturing) enables fabrication of patient-specific bone scaffolds with controlled architecture, composition, and bioactivity. Using techniques, like selective laser sintering (SLS), stereolithography …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 16–23 Read article
-
Enhancing the strength and flexibility of crowns and bridges: advances in materials, design, and nanotechnology.
Abstract: The continuous advancement in restorative dentistry has led to the integration of nanotechnology in the fabrication of crowns and bridges, significantly enhancing their mechanical and functional performance. Nano-enhanced materials, including nanoparticle-reinforced resin matrices, nanostructured ceramics, and nano-modified adhesive systems, demonstrate superior properties compared to conventional materials. These improvements are largely attributed to the uniform dispersion of nanoparticles, which enhances filler–matrix bonding, increases surface interaction, and reduces microstructural defects, resulting in …
Published in International journal of Nanobiotechnology · Vol. 12, Issue 1, 2026 · pp. 34–42 Read article
-
A Comprehensive Review of Metal Matrix Composites (MMCs)
Abstract: Abstract Metal Matrix Composites (MMCs) combine metallic matrices with reinforcing phases (ceramics, intermetallics, fibers, or particles) to achieve superior mechanical, thermal, and tribological properties compared with monolithic metals. This review surveys fabrication routes, reinforcement types, microstructural characteristics, mechanical and tribological behavior, machining challenges, applications across aerospace, automotive, electronics, and future directions including additive manufacturing, in-situ MMCs, and data-driven materials design. Critical challenges such as interface control, scalability, cost, and machinability …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article