Search
214 articles for “Steel.”
-
A Review on Steel Metallurgy
Abstract: Steel is mostly manufactured in the manufacturing industries and it is nearly ninety percent due to its extremely higher strength and high toughness. This review paper discusses on the classification of steels, steel as a potential engineering material, mechanical properties and fabrication properties of steels. It also explains on its applications, low alloy steels groups and its properties. This review article also discusses on special steels like micro alloyed steels, …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 1, 2024 · pp. 1–6 Read article
-
Structural Behavior and Fire Resistance of Shallow Steel-Concrete Composite Decks
Abstract: This study investigates the structural behavior and fire resistance of Shallow Steel-Beam-Concrete Composite (SSCC) decks, focusing on the influence of various Steel-Concrete (SC) bonding techniques. SSCC decks combine steel beams with concrete slabs, offering structural efficiency and durability under significant loads. The effectiveness of SC bonding methods is evaluated by comparing experimental results to Full Composite Action (FCA) simulations. Fire resistance in shallow floors, particularly SlimFlor systems, is analyzed using …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 2, 2024 Read article
-
Seismic Behavior of Composite Steel-Concrete Beams in High-Risk Earthquake Zones: An Analytical and Experimental Approach
Abstract: Abstract This study investigates the seismic performance of composite steel-concrete beams in high-risk earthquake zones through a combination of analytical modeling and experimental testing. Composite beams, which combine the strengths of steel and concrete, are increasingly utilized in structural designs due to their superior load-bearing capacity and ductility. The research emphasizes the behavior of these beams under seismic loading, focusing on critical parameters such as energy dissipation, load transfer mechanisms, …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 2, 2025 · pp. 43–64 Read article
-
Dynamic Behaviour of Steel-Concrete Composite Bridge under Moving Loads
Abstract: Composite structure is a structure which is constructed using multiple dissimilar materials. The construction is called composite when two different types of materials are strongly bond together to act as a single unit. For a composite bridge deck a reinforced concrete slab is placed on the steel plate girder to form a complete structure. Use of composite structure has widely grown in the 21st century. This paper gives the brief …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 8, Issue 1, 2022 · pp. 40–47 Read article
-
Characterization of Tensile Properties of Dissimilar Welded Joints of 316 Stainless Steel and HSLA Steel
Abstract: In this research, dissimilar weld joints of 316 stainless steel/HSLA steel were produced using ER316L-16 and E7018 filler metals by varying welding parameters such as current and arc voltage. Heat input and travel speed was computed. The joints were subjected to tensile test and tensile values were determined, computed, recorded and analysed. The heat inputs were compared with the tensile test results. According to the results obtained and analysis carried …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 2, 2020 · pp. 1–7 Read article
-
Effect of Environmental Parameters on Corrosion of Metal Steel in Stagnant Fresh Water Using Finite Element Approach
Abstract: Corrosion as the determination or destruction of metal due to the reaction with it environment has posed a large amount of threat to industrial plants, human, increased cost of maintenance of plant and like cause injury to human due to accident in work place. This work studies the effect of environmental parameters of corrosion of three types of steel, Cast iron, mild steel and stainless steel in stagnant water media …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 1, 2020 · pp. 1–23 Read article
-
Structural Behavior of Cold Form Steel Truss
Abstract: This paper presents analytical observation results on the performance of Cold Formed Steel Truss and Hot rolled Steel Truss. Two trusses of same dimensions and same type with different materials have been studied and compared. Both the materials are compared on the basis of “fast, better and economic construction”. One truss is completely designed and analyzed in Hot rolled steel while the same model is designed in Cold Formed steel. …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 1, 2021 · pp. 16–23 Read article
-
Revolutionizing Steel Production: A Pathway to Low-Carbon Direct Reduction Iron (DRI)
Abstract: The steel industry, a cornerstone of modern infrastructure, is a significant contributor to global CO2 emissions, accounting for roughly 11% of industrial carbon output. To mitigate this impact, breakthrough technologies and decarbonization strategies are essential, especially as extreme weather events highlight the urgency of addressing climate change. Potential routes to a low-carbon future for steelmaking are provided by advancements in carbon capture, utilization, and storage (CCUS), hydrogen-based steel manufacturing, and …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 2, 2024 · pp. 11–15 Read article
-
Evaluation of The Resistance of Concrete by Partial Replacement of Coarse Aggregate with Steel Slag and Cement with Bentonite Powder
Abstract: According to the WHO, concrete is the third most consumed material by humans after food and water. Concrete consists of cement, coarse aggregate, fine aggregate and water. In the production of cement, carbon dioxide is released into the environment, which becomes a big problem for environmental protection. Therefore, there is a need to modify the cement with some natural materials with pozzolanic properties. The aggregates, which are extracted from natural …
Published in International Journal of Concrete Technology · Vol. 8, Issue 1, 2022 · pp. 21–29 Read article
-
Experimental Investigations for Comparing the Effectiveness of Heat Treatment and Cryogenic Treatment on Wear Performance of EN-47 Spring Steel
Abstract: EN-47 spring steel is chromium, vanadium steel which consists of carbon (0.45–0.55%), manganese (0.50–0.80), silicon (0.50%), phosphorus (0.06%), and sulphur (0.06%) along with chromium (0.80–1.20%) and vanadium (0.15%). Due to this composition EN-47 spring steel become harder and tougher. It has a wide range of applications like crankshafts, steering knuckles, gears, spindles, pumps, suspension etc. So, in this experimental study we treated EN-47 spring steel with cryogenic treatment, cryogenic and …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Study of Corrosion and Corrosion Protection of Rebar Steel in Saline water
Abstract: Corrosion is major problem with metals. When they come in contact of surrounding corrosive medium to construct a corrosion cell on their interface, metals undergo in corrosion reactions. Such environments metals can be exhibited uniform, galvanic, pitting, stress, crevice, embrittlement, intergranular corrosion etc. The corrosion of phenomenon of rebar steel studied in saline water. It creates corrosive medium for rebar steel due to availability of chloride ions. Rebar steel is …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 1–11 Read article
-
Review Study on re-strengthening of reinforced concrete circular column using steel strips
Abstract: This technique fixes thin steel plates i.e. steel encasement or tie plates i.e. steel cage around the column with steel angles at each corner, clamped to the concrete and welded together. Adequate tightening of the jackets can be ensured by means of heat tensioning. The use of steel jackets can enhance the shear strength of columns considerably. However, due to their low flexural stiffness they typically have poor confinement efficiency …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 1–9 Read article
-
High Strength Concrete (M40) Using Micro Silica and Steel Fiber
Abstract: Abstract: This experimental study examines the combined effects of micro silica (silica fume, SF) as a partial cement replacement and hooked-end steel fibers on the mechanical properties of M40 grade concrete. Concrete mixes were designed as per IS:10262 with a target characteristic compressive strength of 40 MPa. Silica fume was incorporated at 0%, 5%, 10%, and 12% by weight of cement, while steel fibers (aspect ratio ~50) were added at …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 53–57 Read article
-
Chemical and Geotechnical Evaluation of Steel Slag for Sustainable Construction Practices
Abstract: Steel slag, a byproduct of the steelmaking process, is generated at an estimated 160 kg per ton ofsteel production. This study explores the chemical and mineral compositions of steel slag,highlighting key compounds such as SiO2, CaO, Fe2O3, Al2O3, and MnO, along with mineralcomponents like C3S, C2S, C4AF, and free-CaO. The research emphasizes the extensive applications ofsteel slag in cement-based products, ceramics, road paving, and concrete admixtures. Specifically, itevaluates the incorporation …
Published in International Journal of Analytical and Applied Chemistry · Vol. 10, Issue 2, 2024 · pp. 28–37 Read article
-
Use of Steel Slag in Rigid Pavement
Abstract: Steel slag is a byproduct obtained from steel industry. It is generated as a residue during the production of steel. Because of the high disposal cost as a waste material and the overall positive features of steel slag, it has been declared a useful construction material, not an industrial waste by most of the developed countries. Successively, it is recycled as an aggregate for the construction of roads, soil stabilization, …
Published in International Journal of Sustainable Building Technology · Vol. 2, Issue 2, 2019 · pp. 12–26 Read article
-
Selection of Grade of Concrete & Grade of Steel
Abstract: Abstract In structural engineering, understanding the load distribution between steel and concrete is crucialfor ensuring the safety and stability of reinforced concrete structures. The load-bearing capacity ofboth materials, steel and concrete, is dependent on their respective characteristic strengths, whichinclude compressive, tensile, bending, and shear strengths. The behavior of a reinforced concretestructure under various loads is influenced by the interaction between these two materials, wheresteel typically handles tensile and bending stresses, …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 1, 2025 · pp. 32–37 Read article
-
Organic Compound 5-(4-methoxybenzyl)-N-phenyl-1,3,4-thiadiazol-2-amine and NiS filler used to Mitigation the Corrosion of Mild steel and in Marine Atmosphere
Abstract: The concentration of chloride ions is higher in marine atmosphere. The bulk amount of mild steel uses in sea weather for different works. This metal is very sensitive in chloride ions. It produces hostile environment for mild steel. Chloride ions develop corrosion cell on the surface of mild steel and it changes their external and internal morphology as well as physical, chemical and mechanical properties. Mild steel exhibits corrosion reaction …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 56–64 Read article
-
Corrosion Inhibitors for Steel Appliances
Abstract: Inhibitors of corrosion in stainless steels are based on alloy developments. Effects of various alloy elements are to form passive film on surfaces under corrosive conditions. Tendency of passive film formation has rendered stainless steel to be applicable for any sector except bio-medical purposes. Line pipe of flow lines and gathering lines are suggested to use conventional carbon steel pipe with cost effective inhibitors. Duel phase stainless steels or improved …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Effect of Burr Height in Drilling Low Carbon Steels for Different Drill Point Angles
Abstract: In the present work low carbon steel have been used to observe the burr height at the exit end of the workpiece of a drilled hole under different machining conditions. Three uncoated 12 mm diameter HSS twist drills are used. These drills have different drill point angles, i.e., 118°, 100°, 80°. All the experiments are carried out on a CNC milling machine with and without the application of coolant. Cutting …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 24–37 Read article
-
Experimental Investigation of Vegetable Oil Based Cutting Fluid (VBCF) on Surface Roughness in Turning EN-8 Steel
Abstract: In the present study, properties of the present work of the non-ionic surfactants have been recognized to formulate vegetable oil based cutting fluid (VBCF) palm oil for the emulsion as non-conventional lubricant. Surface finish is an important indicator of quality in manufacturing industries and thus it is regarded as one of the most important parameter to be considered. In this present study, different machining parameters were taken and their effect …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 2, 2018 · pp. 1–11 Read article