Search
176 articles for “Simulation”
-
Integrated Process Design and Simulation of Amine-Based CO₂ Capture: A Path to Emission Control
Abstract: The flow sheet must represent the complete process in detail taking care of all process equipment. ASPEN HYSYS simulation software was used to simulate the process, the models of the process was simulated using MATLAB. The concentration of the atmospheric CO 2 was found to having been increasing steadily and has risen up to 35% since the Industrial Revolution. This rate, at which the concentration of CO 2 is increasing, …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 11, Issue 2, 2025 Read article
-
Analytical Modeling and Simulation of Helical Gear Systems for Improved Load Distribution
Abstract: An analytical modeling and simulation methodology to improving load distribution in helical gear systems is presented in this research study. Fundamental parts of many mechanical systems, helical gears provide the benefits of smooth engagement, lower noise levels, and increased weight bearing capability. However, retaining lifespan and dependability in gear systems requires establishing regular load distribution throughout the gear teeth. This work explores the parameters influencing load distribution and suggests strategies …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 10, Issue 1, 2024 · pp. 1–10 Read article
-
Smart Wastewater Treatment Plant Modeling Using ANN And ASM1 MATLAB Simulation
Abstract: Wastewater Treatment Plants (WWTPs) are necessary infrastructure for protecting the environment and public health, but modeling and predicting performance has been an ongoing challenge for engineers working within a WWTP and regulators of the environment. For many years the Activated Sludge Model No. 1 (ASM1) has been the standard for simulating biological treatment processes, but the conventional implementations in MATLAB do not provide the user-friendly interface, the predictive intelligence, or …
Published in International Journal of Chemical Engineering and Processing · Vol. 12, Issue 2, 2026 · pp. 44–62 Read article
-
Performance Evaluation of 45kW Low Temperature Proton Exchange Membrane Fuel Cell System Using Simulation Techniques
Abstract: AbstractThe Low-Temperature Proton Exchange Membrane Fuel Cell (LT-PEMFC) has gained prominence as a promising solution for clean and efficient energy generation, particularly in the automotive industry, where stringent emission norms and sustainability goals are driving innovation. LT-PEMFC systems offer several inherent advantages, including high energy conversion efficiency, low operational temperature, rapid start-up capability, and compatibility with hydrogen as a renewable fuel source. These characteristics make them attractive for commercial vehicle …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 2, 2025 · pp. 25–39 Read article
-
A Review of Combustion Modeling Techniques for IC Engines: CFD Simulations and Experimental Correlations
Abstract: For a long time, internal combustion (IC) engines have been the mainstay of power generating and transportation systems. However, a move toward cleaner and more efficient engine technologies has been spurred by stricter pollution restrictions and growing environmental concerns. In this context, combustion modeling has emerged as a critical tool for understanding in-cylinder processes and improving engine performance. This review focuses on the evolution and application of various combustion modeling …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 1, 2025 · pp. 13–20 Read article
-
Mechanical and Thermal Performance Comparison of Nylon 6 and PET Spur Gears via Fusion 360 Finite Element Simulation
Abstract: *Author for CorrespondenceSiddesh BE-mail: [email protected] Student, Department of Mechanical Engineering, University B.D.T College of Engineering, Davanagere, Karnataka, India. Received Date: October 29, 2025Accepted Date: November 07, 2025Published Date: November 17, 2025 Citation: Siddesh B. Mechanical and Thermal Performance Comparison of Nylon 6 and PET Spur Gears via Fusion 360 Finite Element Simulation. International Journal of Mechanics and Design. 2025; 11(2): 1–7p. Abstract Polymer gears are increasingly used in engineering applications …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 2, 2025 · pp. 1–7 Read article
-
Heat Generated Simulation with Bacteria and Fungi inCrude Oil Remediation in an Aerated Lagoon
Abstract: Studies on the heat generated by bacteria and fungi in an aerated lagoon were monitored by theapplication of MATLAB computed software simulation. Mathematical models were developed in termsof substrate utilization by microbes and correlated with the Monod’s equation model which revealedthe trend of heat generated at different operating temperature of 15°C, 30°C, 45°C, 60°C, 75°C, 90°C,105°C and 120°C. The heat generated varies with increase in the microbial concentration as favoredby …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 12, Issue 1, 2026 · pp. 27–45 Read article
-
Design and Simulation of Compact Microstrip Patch Antennas for 5G Applications
Abstract: The rapid growth of fifth-generation (5G) wireless communication systems has created significant demand for compact, high-gain, low-profile, and energy-efficient antenna technologies. Microstrip patch antennas have emerged as one of the most suitable antenna structures for 5G applications because of their lightweight design, low fabrication cost, compact size, ease of integration, and compatibility with modern wireless devices. However, conventional microstrip patch antennas suffer from limitations such as narrow bandwidth, low gain, …
Published in International Journal of Broadband Cellular Communication · Vol. 11, Issue 1, 2026 · pp. 1–16 Read article
-
Thermoelectric Energy Recovery from Exhaust Systems: Design, Simulation, and Performance Analysis of a Waste-Heat Recovery Prototype
Abstract: In today’s context, energy plays a vital role in environmental development. Unfortunately, most energy strategies that yield immediate benefits often contribute to long-term environmental degradation. The law of conservation of energy states that “Energy cannot be created or destroyed; it can only change from one form to another.” This idea emphasizes the fact that no technological improvement can continue eternally without having negative effects. Every living thing on the world …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 11, Issue 2, 2025 · pp. 1–21 Read article
-
Polynomial Thevenin Resistance Networks for Spice Simulation
Abstract: Two networks with resistors and independent sources are considered to compute Thevenin resistance. A different network is considered where the Thevenin resistance from the previous independent networks is to be incorporated (in a polynomial representation). Different methods using Spice/Pspice software to obtain the above representation are described. SPICE/OrCAD software is used to obtain equivalent circuits for Thevenin equivalent network parameters used in polynomial form are described and other different networks …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 10, Issue 2, 2024 · pp. 22–36 Read article
-
Modelling and Simulation of Adaptive Traffic Control Systems: Electrical Engineering Techniques for Urban Applications
Abstract: Traffic congestion is a ubiquitous challenge in urban areas, necessitating innovative solutions to improve transportation efficiency and alleviate gridlock. Traditional traffic signal control methods often prove inadequate in dynamically adapting to fluctuating traffic conditions, leading to increased travel times, fuel consumption, and emissions. In response, adaptive traffic control systems have emerged as a promising approach to mitigate congestion and enhance traffic flow in urban environments. These systems use real-time data …
Published in International Journal of Transportation Engineering and Traffic System Read article
-
Modeling and Simulation of Adaptive Traffic Control Systems: Electrical Engineering Techniques for Urban Applications
Abstract: Traffic congestion is a ubiquitous challenge in urban areas, necessitating innovative solutions to improve transportation efficiency and alleviate gridlock. Traditional traffic signal control methods often prove inadequate in dynamically adapting to fluctuating traffic conditions, leading to increased travel times, fuel consumption, and emissions. In response, adaptive traffic control systems have emerged as a promising approach to mitigate congestion and enhance traffic flow in urban environments. These systems use real-time data …
Published in International Journal of Electrical Power System and Technology · Vol. 10, Issue 2, 2024 · pp. 1–8 Read article
-
Strategy and Simulation of Smart Prepaid-PostpaidElectricity Meter with Alarm and Anti-Theft Controller
Abstract: Prepaid electricity meters with electrical protection generally control internal electricity and external electricity theft as whole electricity. Internal electricity theft occurs after the electrical energy is captured by the meter, while external electricity theft occurs before the electrical power reaches the meter. The percentage of electricity revenue was lost due to electricity theft and mismanagement. However, most of these losses are due to electricity theft. Illegal electricity use must be …
Published in International Journal of Microwave Engineering and Technology · Vol. 10, Issue 2, 2024 · pp. 12–23 Read article
-
Virtual Reality in Nursing Education: Enhancing Clinical Training and Competency
Abstract: Background: The integration of virtual reality (VR) in nursing education has emerged as a transformative approach to bridge gaps in clinical training, particularly where traditional hands-on opportunities are limited. This study investigates the effectiveness of VR-based simulation on improving clinical competency and self-efficacy among undergraduate nursing students. Methods: A quasi-experimental, pre-test/post-test design was employed with 60 final-year nursing students divided into control (traditional training) and experimental (VR training) groups. Participants …
Published in International journal of Nursing Science Practice and Research Read article
-
CAE Analysis and Material Selection for Chassis of 4-Wheel Efficycle
Abstract: ABSTRACT This paper presents a comprehensive Computer-Aided Engineering (CAE) analysis and material selection study for the chassis of a four-wheel Efficycle — a hybrid human-electric powered vehicle designed for student competitions and sustainable mobility applications. The objective of the study is to evaluate the structural integrity, stiffness, and crashworthiness of the chassis under various loading scenarios including front impact, side impact, rollover, and torsional loads. Using CAD models developed in …
Published in International Journal of Computer Aided Manufacturing · Vol. 11, Issue 2, 2025 · pp. 9–18 Read article
-
CAE Analysis and Material Selection for Chassis of 4-Wheel Efficycle
Abstract: ABSTRACT This paper presents a comprehensive Computer-Aided Engineering (CAE) analysis and material selection study for the chassis of a four-wheel Efficycle — a hybrid human-electric powered vehicle designed for student competitions and sustainable mobility applications. The objective of the study is to evaluate the structural integrity, stiffness, and crashworthiness of the chassis under various loading scenarios including front impact, side impact, rollover, and torsional loads. Using CAD models developed in …
Published in International Journal of Computer Aided Manufacturing · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Effect of the Conductor Sag on the Electromagnetic Transients in High Voltage Lines
Abstract: This paper addresses the effect of the conductor sag on the electromagnetic transients in high voltage lines. A time-domain model for their simulation is presented. It yields a set of simultaneous partial differential equations governing the voltage and current distributions in terms of both the time and location, as well as the corresponding initial and boundary conditions. An efficient Mathematica code is suggested for their numerical solution. The presented model …
Published in International Journal of Analog Integrated Circuits · Vol. 10, Issue 1, 2024 · pp. 8–16 Read article
-
RIS-Assisted 6G Wireless Communication: BER, Security Gain and Multi-Metric Performance Analysis
Abstract: Reconfigurable Intelligent Surfaces (RISs) provide programmable control over wireless signal propagation and are emerging as a promising technology for enhancing the reliability, energy efficiency, coverage, and physical-layer security of sixth generation (6G) wireless networks. This paper presents a unified simulation-based performance evaluation of conventional SISO, 4G SIMO, and 6G multi-antenna communication systems, followed by an RIS-assisted reliability and security analysis under Rayleigh fading conditions. The simulation results demonstrate that antenna …
Published in International Journal of Broadband Cellular Communication · Vol. 11, Issue 2, 2026 Read article
-
Faults in On-Load Tap Changer of a Transformer: An Innovative Approach to Mechanical Fault Diagnosis
Abstract: On-load tap changer (OLTC) is very important for maintaining or regulating output voltage, but it has moving contact & complex switching mechanisms which contributes to the failure of on-load tap changer. Faults in OLTC such as Coking Contact wear and damaged transition resistors significantly reduce reliability of transformers which may lead to catastrophic failures of transformers. There are some traditional approaches for diagnostics of OLTC, such as Static Resistance Measurements, …
Published in International Journal of Electrical Power System and Technology · Vol. 12, Issue 2, 2026 Read article
-
Design and Finite Element Analysis of Go-Kart Tubular Chassis Using Ansys
Abstract: The design of a go-kart chassis involves the vehicle’s performance, safety, and handling characteristics. The present work focuses on the conceptual design, modeling, and structural analysis of a go-kart chassis aimed at achieving an optimal balance between strength, weight, and driver comfort using FEA software ANSYS. A detailed chassis model was developed based on ergonomic considerations and racing standards. The design was evaluated through an FEM approach to assess stress …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 56–64 Read article