Search
472 articles for “Production Process”
-
Design and Pinch Analysis of Methyl Acetate Production Process using Aspen Plus and Aspen Energy Analyzer
Abstract: Abstract This study deals with the design and heat integration of Methyl Acetate production process. Initially, Methyl Acetate production process plant is designed using Aspen Plus. Methyl acetate obtained is 99.99% pure and the designed plant is safe to environment with less emissions. For the developed process plant, pinch analysis is applied using Aspen Energy Analyzer. Improved Heat exchanger networks (HEN) is obtained with retrofit analysis of the process plant. …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 1, 2015 · pp. 31–40 Read article
-
Design and Pinch Analysis of Styrene Production Process Using Aspen HYSYS and Aspen Energy Analyzer
Abstract: This paper presents the design and energy analysis of styrene production process. Process flow diagram is designed using Aspen HYSYS. Styrene product obtained is of purity 73% and further purity is recommended. Pinch analysis is applied to the process plant by using Aspen Energy Analyzer, as a part of that in the first step all the stream data is extracted, in the second step heat exchanger networks (HEN) is developed …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 1, Issue 1, 2015 Read article
-
A Review on Bio-Oil Production from Agricultural Waste Based on Various Processes, Bio-Oil Yield and Energy Recovery
Abstract: Agricultural waste generated through cultivation of crops, vegetables, fruits, and poultry can pollute the environment and affect the health of both humans and animals. Traditionally, most agricultural wastes are either burned or disposed of in landfills which cause acute environmental pollution. These easily accessible and underutilized agro-wastes remain a potential resource for biofuel production. This review analyses several thermochemical and biochemical methods encompassing pyrolysis, gasification, and hydrothermal carbonization (HTC) and …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 11, Issue 1, 2025 · pp. 9–19 Read article
-
Scleroglucan Production by Microbes and Downstream Processing
Abstract: Polymer based synthetic petroleum and plant natural polysaccharides do have the drawback of limited sources, as well as the latter's non-biodegradability. Eco-friendly, low-cost, and standardised microbial polysaccharides, on the other hand, offer a viable solution to this problem. They drew international recognition due to their original and distinctive physical and chemical propertiesas well as a diverse spectrum of industrial applications, the majority of which are rapidly becoming economically competitive. Scleroglucan, …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 8, Issue 1, 2022 · pp. 18–23 Read article
-
A Review on the Multiscale Integrated Approach in Multiphase Reaction Engineering and Process Intensification: Sustainable Energy and Process Design
Abstract: Abstract: Multiphase reaction engineering and process is important path for conversion of natural resources into fuels and chemicals to reduce greenhouse gas emission and increasing energy supply to meet growing global demand. This requires multiphase reactor design and modeling development for methane conversion into chemical building blocks, upgrading heavy oil and carbon capture. This multiphase reactor modeling involves the multiscale approach, which requires the knowledge of how phenomena at a …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 2, 2020 · pp. 18–26 Read article
-
Application of hybrid RSM-GA technique in predicting optimum process parameters of biodiesel production from Karanja and Mahua oils
Abstract: The current work is focused on the maximization of biodiesel production from Karanja and Mahua oils. The design expert 6.0.8 tool is used for applying the RSM and half fraction with five input process parameters are entered in it. The ranges of all the process parameters are obtained from the literature review. The experiment design matrix is produced to conduct the experiments in order to get maximum biodiesel yield. The …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 1, 2023 · pp. 7–11 Read article
-
Increased Efficiency and Shelf Life of Functional Foods Through Nanoparticle-Based Products in Food Packing and Processing Industries
Abstract: In recent years there is an upsurge in food industries as numerous food products are launched to enhance its shelf life and storage efficiency. In resolving these issues nanotechnology especially in food sector including food processing, food monitoring, food packaging, development of food modifying colors, production of functional foods, nutritional or flavoring properties according to a dietary need of a person as well as production of stronger coloring, flavorings and …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 3, Issue 2, 2017 · pp. 39–44 Read article
-
Green Manufacturing Implementation Framework for Ethiopian Manufacturing Industry
Abstract: In the current period of fierce market competition, industries are introducing efficient production processes to ensure their existence. The rate of contamination of natural resources such as water, soil, and air are increasing due to industrial waste. Rapid environmental degradation has demanded that enterprises worldwide adopt environmentally responsible manufacturing practises. Green manufacturing methods were envisaged and implemented in this context by large-scale firms in industrialised countries. Managing green manufacturing practises …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 2, 2022 · pp. 1–5 Read article
-
Ethanol Production from Banana Peels by Fermentation Process using Yeast
Abstract: The need of energy is increasing day by day and sustainability is becoming important factor in growth. To fulfil the need of rising population, it has become necessary to find alternative sources of fuel. Non-renewable sources are depleting fast. Use of renewable sources has become important area of research in sustainable engineering. Synthesis of biofuel from waste feedstock is being explored for increasing fuel economy and reduce environmental footprints. Ethanol …
Published in International Journal of Green Chemistry · Vol. 8, Issue 1, 2022 · pp. 1–8 Read article
-
Biodiesel production using waste cooking oil: influence of catalysts on reaction parameters
Abstract: Over a century ago, Rudolf Diesel tested the used of vegetable oil as fuel for his automotive engine, several years later, bio-based diesel obtain from trans-esterification of animal fats or vegetable oils in presence of catalyst have been used as alternative automotive fuels to safe guard the environment and avoid global warming. Cost of production process has limited the diversification and generalizes usage of biodiesel, thus exploring avenues for cost …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Review on Processing of Milk and Milk Products
Abstract: Milk (Toned, Standard, Janta, and Special) in 200ml, 500ml, and 1 litre packs, butter, paneer, Mattha Lassi, Peda, and Dahi are currently produced (curd). At the Reception department, samples of the milk received from the societies are taken for quality control. The milk is weighed before being transported to the Processing Section for storage and refrigeration. The milk is diverted here for pasteurisation, milk packing, and the production of dairy …
Published in International Journal of Analytical and Applied Chemistry · Vol. 8, Issue 1, 2022 · pp. 21–39 Read article
-
The advanced composite materials production by new method using the process of vibro-turbulization
Abstract: Typically, the methods of composite materials production, such as epoxy bases, include preparing a binder by mixing a hardener, a solvent and an epoxy resin, infusing a fibrous or powder filler with a binder, and hardening by heating under pressure. These methods do not permit to reach the main goal of the production of advanced composite materials with a basis (matrix) filled by uniformly dvistributed fibrous or powder filler (armoured …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 1–4 Read article
-
Use of the electrolysis hydrogen bubbles and process of vibroturbulization for advanced gasfilled materials production
Abstract: Production of gasfilled materials with the high physical mechanical properties plays a large role for effective use of these materials in chemical industry, medicine, machine building and space technology. Existing methods of gasfilled materials production such as the creation and the foaming of the water dispersions of high polymers using the thermal decomposition of organic and inorganic matter, using the radiation destruction of thermoplastic polymer or using the injection of …
Published in International Journal of Analytical and Applied Chemistry · Vol. 5, Issue 2, 2019 · pp. 1–6 Read article
-
Parametric Appraisal for Compression Behaviour of Machine Made Carpet: Exploration of Taguchi Optimisation Techniques
Abstract: Carpets and rugs are mainly classified into two types as hand-made carpets and machine-made carpets, in present; various machine carpets are available produced with needling and bonding techniques. In this study, an attempt has been made to identify the significant factor affecting the compression behavior of machine made carpets manufactured by M-Tuft hi-tech machine with exploration of Taguchi robust design philosophy for quality and productivity characteristics optimization. Lower the better …
Published in International Journal of Manufacturing and Materials Processing · Vol. 3, Issue 2, 2017 · pp. 16–22 Read article
-
Technical Insights into the Industrial Synthesis and Production of Ten Prominent Plant Growth Regulator Molecules: Process Flow and Mass Balance Determination
Abstract: Plant Growth Regulators (PGPRs) are indispensable tools in modern agriculture, offering precise control over various aspects of plant development and enhancing crop productivity. While their diverse applications are widely recognized, detailed technical insights into their industrial manufacturing processes, including synthesis routes, process flow, and mass balance, are often limited. This manuscript addresses this gap by presenting a comprehensive technical analysis of the industrial synthesis and production of ten prominent PGPR …
Published in International Journal of Analytical and Applied Chemistry · Vol. 11, Issue 2, 2025 Read article
-
A Review on Reduction of Scrap in Foundry by Using of Quality Control Tools
Abstract: Casting is one of the oldest manufacturing processes and is a primary manufacturing process. Products originating from castings are the input for many manufacturing processes such as forging, machining, rolling, wire drawing, extrusion, and welding. Therefore, the product made from casting should be a good quality product without defects or with minimum defects. Indeed, the quality of the products reduces as a reason of many process parameters such as molten …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 1, 2020 · pp. 6–17 Read article
-
Comprehensive Manufacturing Processes, Chemical Syntheses, and Mass Balance Analyses for Ten Essential Fungicides in Agrochemical Production
Abstract: This research paper presents a detailed examination of the manufacturing processes for ten key fungicides used in agrochemical applications: Amisulbrom, Azoxystrobin, Benzovindiflupyr, Bixafen, Boscalid, Carboxin, Carpropamid, Cyazofamid, Cyclobutrifluram, and Cyflufenamid. For each fungicide, the synthesis pathways are outlined, including step-by-step chemical reactions, basic chemistry, reactant stoichiometries, and mass calculations based on a standardized production scale of 1000 kg of the final product. Mass balances are provided to account for inputs …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 11, Issue 2, 2026 · pp. 1–21 Read article
-
Development of Mathematical Model for the Catalytic Polymerization of Propylene Process
Abstract: Mathematical model was developed to monitor, predict and simulate the catalytic polymerization of polypropylene process in a continuous stirred Tank Reactor, (CSTR). The developed model was based on consideration of functional parameters that influence the catalytic polymerization of propylene process production. These functional parameters are hydrodynamic factors, which induce process coverage into Aspen polymers to demonstrate the reliability of mass and heat transfer phenomena experienced during catalytic polymerization of propylene …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 4, Issue 2, 2018 · pp. 29–36 Read article
-
A Review on Challenges and Opportunities in Green Pharmacy
Abstract: The green chemistry revolution is providing an enormous number of challenges to those who practice chemistry in industry, education and research. With these challenges however, there are an equal number of opportunities to discover and apply new chemistry, to improve the economics of chemical manufacturing and to enhance the much-tarnished image of chemistry. After introducing the concept of new sustainable chemical technologies and also including a brief assessment of green …
Published in International Journal of Green Chemistry · Vol. 1, Issue 1, 2015 · pp. 33–41 Read article
-
Green Pharmacy - Opportunities and Challenges
Abstract: The green chemistry revolution is providing an enormous number of challenges to those who practice chemistry in industry, education and research. With these challenges however, there are an equal number of opportunities to discover and apply new chemistry, to improve the economics of chemical manufacturing and to enhance the much-tarnished image of chemistry. After introducing the concept of new sustainable chemical technologies and also including a brief assessment of green …
Published in International Journal of Green Chemistry · Vol. 3, Issue 2, 2017 · pp. 15–23 Read article