Search
129 articles for “Power Converters”
-
Fault-Tolerant Modular Power Converter for Large-Scale Renewable Energy Integration
Abstract: The rapid expansion of large-scale renewable energy systems has significantly increased the demand for highly reliable and fault-resilient power electronic converters capable of maintaining stable grid operation under component failures and fluctuating renewable power generation. This paper proposes a Fault-Tolerant Modular Power Converter (FTMPC) for large-scale renewable energy integration, incorporating a modular multilevel architecture, intelligent fault diagnosis, and adaptive reconfiguration control to ensure uninterrupted power conversion. The proposed converter continuously …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 12, Issue 2, 2026 Read article
-
Multicore Processing of the Aeroderivative Twin-Shaft Gas Turbine Engine with AC Powered Power Converter
Abstract: This study provided a method for the use of an automatic transmission to imitate the steady-state and intermittent shaft power features of the aeroderived twin-shaft turbine engine. Model-based regulation provides the foundation for the development of an aeroderived twin-shaft engine emulation system. Specifications are developed to help describe the engine and variable-speed movement, focused on torque, power and momentum. This method reflects the difference in friction between the engine and …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 6, Issue 2, 2020 · pp. 18–24 Read article
-
Front-End Converters for Power Quality Enhancement in EV Chargers: A Review
Abstract: The increasing growth of electric vehicle (EV) adoption has increased the need for charging infrastructure that is efficient, reliable, and works well with the grid. Front-end converters (FECs) are very important for making sure that power quality is good and that international standards are followed. They are located between the utility grid and the power conversion stages of EV chargers. This research paper offers an extensive examination of front-end converter …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 12, Issue 1, 2026 Read article
-
A Wireless Power Transfer System Calibrated for Multiple Loads
Abstract: This research presents a novel wireless power transmission (WPT) model utilizing Lenz coils to effectively power multiple loads simultaneously. The increasing demand for efficient energy transfer in various applications, such as consumer electronics and medical devices, necessitates innovative solutions to enhance the performance of WPT systems. Through a series of experimental setups and simulations, we demonstrate that integrating Lenz coils significantly enhances coupling efficiency and reduces electromagnetic interference, leading to …
Published in International Journal of Electrical Power System and Technology · Vol. 11, Issue 1, 2025 Read article
-
Microgrid Sources and Power Electronic Interfaces: A ComprehensiveReview on Source Characteristics, Converter Design, Protection, Power Quality, and Energy Storage Integration
Abstract: Microgrids have become a prospective technology in improving energy reliability, sustainability, and resilience through a combination of a variety of distributed energy sources, sophisticated power electronic interface, and energy storage systems. In this paper, there is an in-depth discussion of the source of microgrids, its fundamental features, and how it works and the criteria that may be used in selecting the source of microgrids depending on the factors involved and …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 11, Issue 2, 2025 · pp. 30–61 Read article
-
Optimizing Power Factor and Efficiency in EV Chargers: Bridgeless Isolated Zeta-Luo Converter Solutions
Abstract: This paper focuses on enhancing the power factor of Electric Vehicle (EV) chargers through the implementation of a Bridgeless Isolated Zeta-Luo Converter. Poor power factor is a common feature of conventional charging systems, which increases energy losses and decreases efficiency. It is critical to address the serious environmental problems that transportation-related hydrocarbon emissions represent in the modern world. Electric car adoption is picking up steam as a means of promoting …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 10, Issue 2, 2024 · pp. 1–7 Read article
-
Competitive Analysis for the Improvement of Power Factor using Zeta Converter and SEPIC Converter for BLDC Motor
Abstract: In this paper, we studied the competitive analysis for the improvement of power factor using zeta converter and SEPIC converter for BLDC motor by reducing the configuration of sensor. For the low power factor application, here we can control the speed of motor by varying the voltage of inverter by giving the feedback of BLDC motor drive. A low frequency is used for electromagnetic communication of the motor which reduce …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 5, Issue 1, 2019 · pp. 28–35 Read article
-
Comparing Modeling, Stability Analysis and Simulation of AC and DC Microgrid Using Buck Converters
Abstract: Rapid reduction of non-renewable sources of energy is driving development toward sustainability. Increased integration of distributed generation units, including renewable sources of energy and energy storage systems (ESS), has simulated research in new techniques of power generation. At the same time, integration of these distributed generation units in the conventional power generation setup has become challenging. To counteract these challenges, AC microgrid (ACMG). The Concept of AC microgrid Introduced (ACMG). …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 8, Issue 2, 2022 · pp. 9–16 Read article
-
Simulation, Analysis, and Stability Using Matlab of Photovoltaic Solar Power System
Abstract: ABSTRACTA worldwide installation of solar photovoltaic (PV) systems was observed. It is determined mostly through demand to "clean" power generation for future mixed power systems connected through large no. of power electronics converters, grid-based PV systems will be also a very active player. There have been stringent demands on the complete PV network (NW) to accomplish effective and efficient PV power generation. In return, it advances power converter technology development …
Published in International Journal of Digital Communication and Analog Signals · Vol. 5, Issue 2, 2019 · pp. 20–30 Read article
-
Grid Interconnection of RES at the Distribution Level with Power-Quality Enhancement Features
Abstract: This paper describes enhanced technique of power quality at utility end in a network framework associated with renewable source of energy for power generation. With advancement of new functionalities sunlight based vitality based Photovoltaic cells are forthcoming energy source with higher efficiency. With the increase in load demand, the Renewable Energy Sources (RES) are increasingly connected in the distribution systems which utilizes power electronic Converters/Inverters. The Photo Voltaic (PV) Panel …
Published in International Journal of Analog Integrated Circuits · Vol. 1, Issue 1, 2015 · pp. 18–26 Read article
-
A Review on Grid Interconnection of Renewable Energy Sources at the Distribution Level with Power Quality Improvement Features
Abstract: Renewable energy sources (RES) are as a rule progressively associated in appropriation frameworks using power electronic converters. This review paper displays a novel control procedure for accomplishing greatest advantages from these matrix interfacing inverters at the point when introduced in 3-phase 4-wire dissemination frameworks. The inverter is controlled to perform as a multi-function device by incorporating active power filter functionality. The inverter can thus be utilized as: 1) power converter …
Published in International Journal of Electrical Power System and Technology · Vol. 2, Issue 1, 2016 · pp. 20–24 Read article
-
Three-Level Interleaved Boost Converter with Irradiance Adaptive Controller for Solar Power Utilization
Abstract: Solar energy conversion through photovoltaic is a rapidly growing source of green power supply. Therefore, improving the efficiency of PV system is considered as an important factor in supporting this trend. However, this concerns not only the improvement of PV cells, but also the efficiency of the power electronics circuits and the controls associated with them. Also, the PV modules are operated at low voltage levels, therefore, large voltage boosting …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 2, 2018 · pp. 1–8 Read article
-
Power Factor Improvement in Single Phase System Using Active Front End Converter
Abstract: There are some major drawbacks of conventional front end converter like low power factor and high harmonic content. Hence, there is a continuous need for power factor improvement and reduction of line current harmonics. Development of new circuit topologies and control strategies for Power Factor Correction (PFC) and harmonic reduction has become still more essential with the introduction of strong technical IEC standards. This work is based on the difference …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 8, Issue 2, 2022 · pp. 24–34 Read article
-
Power Quality Enhancement in 3P4W Electrical Distribution System by using DCMLI-DSTATCOM-TIES with Reliability Study
Abstract: The Quality of the output power from the utilities has become a serious concern of the trendy industries. These power quality associated issues area unit voltage sag, surge, flicker, voltage imbalance, interruptions and harmonic issues. These power quality issues might cause issues to the industries starting from haywire of kit to finish plant close up. It’s been known that power quality will be degraded each owing to utility aspect abnormalities …
Published in International Journal of Electrical Power System and Technology · Vol. 3, Issue 1, 2017 · pp. 16–33 Read article
-
A Novel Honey Badger Optimization MPPT Control for a High Gain Non-Isolated DC–DC Converter for PV Applications
Abstract: The Pulse-width modulation (PWM), a technique used by DC-DC power converters, is currently a hot topic in a variety of applications, including those utilising renewable energy sources. Thus, A novel, The development of a very effective non-isolated converter. To extract the maximum PV system power. In varying weather conditions, maximum power is used to control PV system loading. The maximum power of a PV system is controlled using a fractional …
Published in International Journal of Electrical Power System and Technology · Vol. 9, Issue 1, 2023 · pp. 38–50 Read article
-
Multiple Input Bidirectional DC–DC Converter for DC Drive Applications
Abstract: Multiple input bidirectional DC–DC converter is presented in this paper. This converter is used as an auxiliary supply for a DC motor drive. Motoring action as well as regenerative braking take place due to the bidirectional power flow capability of the converter. The converter is more advantageous because of multiple input capability. This will reduce the components and so the size of the overall system. Moreover the converter can interface …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 1, 2018 · pp. 23–32 Read article
-
Comparison of Back propagation control algorithm with P-Qtheory for power quality improvement using DSTATCOM under steady state condition
Abstract: Providing consumers with high-quality power is the distribution operator's primary goal. Distribution Static Compensator (DSTATCOM), Dynamic Voltage Restorer (DVR), and Unified Power Quality Conditioner (UPQC) are examples of power converter-based custom power devices (CPDs) that are well-known for enhancing the distribution system's power quality. In order to lessen source-side supply power harmonics, DSTACOM is taken into consideration in this work. Any bespoke power device's performance is heavily dependent on the …
Published in International Journal of Electrical Power System and Technology · Vol. 12, Issue 1, 2026 · pp. 25–34 Read article
-
Implementation of Standalone Photovoltaic Water Pumping System Employing Four Switch BLDC Drive and KY DC-DC Converter
Abstract: Solar based mostly water pumping system is obtaining a broad thought, since solar power is found to be the simplest resolution for the prevailing typical energy resources. Furthermore, solar PV (Photovoltaic) fed water pumping is favored technique among the remote regions for various applications. In this paper KY based mostly DC-DC device fed water pumping system with BLDC (Brushless DC motor) is proposed. Voltage ripple reduction is one among the …
Published in International Journal of Digital Communication and Analog Signals · Vol. 6, Issue 2, 2020 · pp. 28–40 Read article
-
Improvement in Output Power by Designing Adaptive Reference Control for Boost Converter in Solar System
Abstract: solution using an FPGA as the master device. The study demonstrates the significance of FSM implementation in HDL coding, as well as how the architecture for protocol implementation in customizable devices has evolved. Solar power systems are generally classified into two main types: off-grid and on-grid systems. Off-grid solar setups operate independently, using photovoltaic (PV) panels and battery storage to produce and store electricity without any connection to the main …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 11, Issue 1, 2025 Read article
-
Multifunctional Shunt Hybrid Power Filter and Thyristor Controlled Reactor for Distributed Generation Integration and Power Quality Improvement
Abstract: This project presents a multifunctional PV fed SHPF-TCR compensator for achieving maximum benefits from these grid-interfacing inverters. The inverter is controlled to perform as a multi-function device by incorporating active power filter functionality. An inverter can be used as power converter to insert the power created from RES to the grid, and shunt APF to reimburse load current harmonics. A SHPF-TCR compensator of a TCR and a SHPF has been …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 3, Issue 2, 2017 · pp. 13–25 Read article