Search
151 articles for “Polymer composites”
-
Mechanical Behavior of AA7075/Glass Fiber Reinforced Polymer Composites
Abstract: This paper reports on the mechanical properties of As-cast and heat-treated AA7075 polymer composites reinforced with glass fibers from 1 to 5 wt%. The polymer composites were fabricated using the Compo casting method, in which short glass fibers were introduced into the vortex created in the molten alloy through an impeller rotated at 500 rpm. The molten mass was thoroughly stirred and poured into permanent molds and squeezed under pressure. …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 11–20 Read article
-
Uses of Natural Fibres in Polymer Composites
Abstract: The increasing demand for sustainable and eco-friendly materials has led to growing interest in utilizing natural fibers as reinforcements in polymer composites. Natural fibers such as jute, flax, hemp, sisal, and coir have gained notable attention due to their renewable origin, biodegradability, low density, and cost-effectiveness when compared with conventional synthetic fibers like glass or carbon. When combined with suitable polymer matrices, these fibers form natural fiber-reinforced polymer composites (NFRPCs), …
Published in International Journal of Analytical and Applied Chemistry · Vol. 12, Issue 1, 2026 · pp. 1–9 Read article
-
Chemical Engineering Analysis of Polymer Composite Creation Using Sawdust, Sharp
Abstract: Polyethylene terephthalate (PET) is known for its general adoption for its lightweight and flexibility and durability nature. It is non-biodegradable and contributes majorly to water and land pollution. The amount of plastic-generated waste is increasing extensively following its usefulness there and the inability of users to properly dump or recycle it has resulted in a big threat to the environment. In this research work an attempt has been made to …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 17–29 Read article
-
Recent Trends in Bio Ceramic and Polymer Compositesfor Biomedical and Dental Applications
Abstract: Advanced biomaterials with great promise for use in dental and biomedical applications are bio-ceramic and polymer composites. These composites combine the flexibility, biodegradability, and processability of polymers with the mechanical strength, bioactivity, and biocompatibility of bio-ceramics. Clinical success is often limited by the biological response and tissue compatibility of conventional materials such as metals and single-phase ceramics. Oste conductivity and bone-like characteristics are exhibited by bio-ceramic materials, such as hydroxyapatite …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Effects of Industrial Waste Filler Content and Compatibilizer on the Performance of Thermoplastic Polymer Composites
Abstract: In this study, we examine the physico-mechanical characteristics of waste filler-thermoplastic polymer composites in relation to the industrial waste filler mixing ratio and compatibilizer concentrations. Three degrees of coupling agent (Epolene E-43) content and four levels of waste filler to thermoplastic polymer mixing ratios were used in the experiment to examine the physical and mechanical characteristics of the composite. As was to be predicted, composite density grew as waste filler …
Published in International Journal of Applied Nanotechnology · Vol. 9, Issue 2, 2023 · pp. 12–21 Read article
-
A Literature Review on the Mechanical Properties of Banana Fiber Reinforced Polymer Composites
Abstract: The usage of composite materials and environmental contamination, as well as the utilization of renewable and biodegradable resources, are closely intertwined in today's rapidly developing world. An environmental researcher is hunting for sustainable materials. The forms and sizes of both natural and synthetic fibers are diverse. Researchers, engineers, and scientists have recently become interested in natural fibers as an alternative reinforcement for fiber-reinforced polymer composites. They are used to replace …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 1–12 Read article
-
Effect of Glass Fiber, Carbon Fiber, and Hybrid Form on Tensile Properties of Pa66/Pp Polymer Composites
Abstract: Mechanical loadings are applied to polymer materials, which are used in mechanical engineering applications. Usually, photopolymer fails to meet them, so some modification must be done to the polymer material. Adding fillers and fibers to the polymer will strengthen it by the polymer blending method. In this investigation, mechanical properties of glass fibers and carbon fibers and combinations of glass and carbon fiber are added to polymer composites. Considerable effort …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 2, 2024 · pp. 27–33 Read article
-
A Review on Potential Uses and Characterization of Okra Fiber Reinforced Polymer Composites
Abstract: The environment, ecology, and new rules from the government agencies are major concerns in the quick-paced society. As a result, scientists and researchers are searching for natural fiber reinforced composites that are biodegradable and renewable. Natural fibers have undeniable advantages over synthetic fibers, including low density, equivalent strength, non-toxicity, low cost, and minimal waste disposal issues. The possible uses of natural fibers have been thoroughly investigated by researchers. But in …
Published in International Journal of Environmental Chemistry · Vol. 8, Issue 2, 2022 · pp. 22–33 Read article
-
Mechanical Behaviour of Natural Reinforced Polymer Composites with Hybrid Additives
Abstract: The implementation of natural fibres is the fast approaching ‘green’ economy based materials that are used in polymer matrix composites that are intended to replace the conventional synthetic polymer composites. Being plenteous fundamentally, natural fibres have been existed the primary form of natural resources for centuries. Considering that mechanical properties of composites are strongly influenced by the quality of the fibre/matrix interface and with eco-friendly properties like excellent energy absorption, …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 1, 2016 · pp. 7–12 Read article
-
Physico-Mechanical and Degradation Properties on Agro-Waste Based Polymer Composites Reinforced with Banana Bunch Fiber
Abstract: The usage of banana bunch fibers in polymer composite parts for the automotive, aerospace, and construction industries is growing. As people grow more aware of the danger of synthetic fibers, banana bunch fibers are being used in an increasing variety of sectors. It is important to recognize that humans depend on the Earth for survival, not the other way around. This understanding drives scientists and policymakers to seek alternatives to …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 2, 2024 · pp. 33–43 Read article
-
Effect of Nano-Fillers on the Mechanical and Fracture Behavior of Polymer Composite Matrices: A Review
Abstract: The modification of polymer composite matrices through the incorporation of nano-scale fillers has become a prominent and highly effective strategy for enhancing mechanical performance, stiffness, and fracture resistance. Unlike conventional micro-scale reinforcements, nano-fillers possess exceptionally high surface area–to–volume ratios and unique physicochemical characteristics that significantly influence interfacial phenomena within the polymer matrix. Materials, such as carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), nano-silica, and layered silicate nanoclays, introduce advanced toughening mechanisms …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 31–36 Read article
-
The Current and Potential Usage Areas of Shape Memory Polymer Composites in the Class of Multifunctional Materials
Abstract: Shape memory polymer composites can be programmed into a temporary shape and recover their original shape by applying different stimuli as temperature, UV, magnetic and electrical.In this way, SMPCs in the active and deformable material class, due to its advantages such as being activated by various activation methods and good biocompatibility properties, it has become the focus of research in the field of creating multifunctional materials. They are widely used …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 1, 2023 · pp. 1–4 Read article
-
Analysis of Mechanical Attributes of Nano clay Reinforced Polymer Composites
Abstract: Composite material provide a Higher and unique mechanical and physical attributes because of its combines the most unique attributes of its composition while underlying their least advantageous attributes . Composites have been widely used in various application starting from aerospace , Manufacturing plants , Electrical equipment's , Marine , Automotive ,Civil Infrastructure , Corrosive Environment’s ,Whereas the Epoxy which are the cured components of two chemical functional group namely polyepoxides …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 Read article
-
Improving Prestressed Concrete Box Girders Using Polymer Composites: Experimental Findings and Analysis
Abstract: Prestressed concrete box girder bridges exhibit complex structural behavior due to various loading scenarios. Extensive studies, both experimental and numerical, have helped advance their use in engineering. The spatial stress in prestressed concrete box girder bridges, especially during construction and service phases, has been analyzed using shell cells, which provide more accurate tensile stress data than beam cells. The deck with the numerous hat section was evaluated in the current …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 2, 2024 · pp. 6–11 Read article
-
Effect of Natural Cellulosic Fiber Surface Modifications on the Mechanical Feature Reinforced Polymer Composites
Abstract: The current era's remedies to global warming revolve around replacing fossil fuels with more ecologically friendly biodegradable materials in order to slow down the rate at which they are being depleted. Calotropis gigantea fruit bunch (CGFB) fiber is one kind of substitute material that this work envisage using in place of plastics in the construction of composite materials, as supported by the study literature. CGFB fiber was chosen for this …
Published in International Journal of Chemical Engineering and Processing · Vol. 11, Issue 1, 2025 Read article
-
A Review of Examining the Mechanical Properties of Natural Fiber Reinforced Polymer Composites for the Automotive Sector
Abstract: The need for lightweight, sustainable materials has increased due to the growing global population, environmental issues, and the fast growth of the automotive sector. Because of their excellent mechanical and physical qualities as well as their environmentally beneficial character, natural fiber-reinforced composites have become a viable option. Due to their ability to blend strength with lightweight properties, these composites are gaining increasing popularity across various industries, including aerospace, automotive, sports, …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 1–7 Read article
-
Effects of Compatibilizer and Paper Sludge Content on the Performances of Thermoplastic Polymer Composites
Abstract: One of the environmental issues affecting third-world countries is the economic use of lignocellulose waste, which is now being researched. Paper sludge (PS) composites will allow for the effective use of a waste material that is currently burned or buried, as well as the ability to lower the cost of the composite that is created. In this study, the mechanical and thermalcharacteristics of environmentally friendly composites constructed from PS-reinforced recycled …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 10–21 Read article
-
Polymer Composites Based Modern Sensors for Various Applications
Abstract: Sensors tradition configured to miniaturization without shape rigidity. Sensors are fabricated by flexible organic substrate embedded with two dimensional composite inorganic particulates of nano-metric dimensions or three-dimensional electro-spin filaments. Thermal degeneration and demagnetizing effects have favored 3d composites or filamentous designs than 2d composites. These sensors have wide usage in medical electronics, aerospace engineering, textile engineering, etc. Basis of techniques are same as in cloth or paper printing. These are …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 1, 2019 · pp. 32–36 Read article
-
A Model for Plastic-Hydrolytic Damage Bioresorbable Polymer Composites
Abstract: This paper explains and assesses a recently developed constitutive model for elastic-damage that may sustain plastic-hydrolytic damage. When a metallic material is subjected to plastic strain, voids and microcracks in the metal matrix start to form, develop, and merge. This is what causes ductilitydegradation in metals. Only a few of the many models that have been presented to depict ductile failure have done a thorough analysis of the entire damage …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 23–27 Read article
-
Fabrication and Study of Natural Plant Fiber Reinforced Polymer Composites
Abstract: Snake grass fiber (sansevieria trifasciata fiber, STF)-strengthened polypropylene (PP) based composites (30 wt% by fiber) was made by hot press technique. STFs were modified by ultraviolet (UV) rays and the composites they produced were evaluated. Optimized STFs were again modified with monomer using UV rays to progress the mechanical features of the composites. Monomer concentration and no. of UV rays were optimized in terms of grafting and mechanical features of …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 11–22 Read article