Search
17 articles for “Orthogonal array”
-
Optimization of Wear Parameters for Medical Implant Applications
Abstract: The purpose of the present research is to check the capability of SS 304 for the application of medical implants and describe the influence of sandblasting process, applied load, frequency, sliding distance on the coefficient of friction of SS 304. In this research, attempts have been made to study the wear behavior of SS 304 at various conditions. In the tribology lab wear test was carried out in accordance with …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Multi Criteria Optimization in Drilling Process of Glass Fibre Reinforced Polymer Using Grey Based Taguchi Analysis
Abstract: The current work uses multi-response Taguchi GRA to analyse and optimise the drilling variables for a modified glass fibre reinforced polymer (GRRP). The L27 orthogonal array design was used to carry out the experiments. The filler material used in this study is hematite ore (Fe 2 O 3 ) particles of 75-150µm, E-Glass fiber of 300 GSM, and LapoxL-12 resin has been used to fabricate the modified GFRP composite laminates. …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 2, 2022 · pp. 6–16 Read article
-
“MODIFIED SEWING MACHINE WORKSTATION DESIGN BY USING TAGUCHI APPROACH”
Abstract: The study was based on design of experiment using Taguchi Orthogonal Array with three parameters namely height of sewing machine table, angular movement of sewing machine table & sliding movement of sewing machine table considered for experimentation. An orthogonal Array of L9 experimental design was adopted & 3 angles namely trunk angle, head angle & neck angle was measured for each experimental run. Then the reading for female & male …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 2, 2016 · pp. 61–88 Read article
-
Design of Experiments for Vibration Monitoring of Rotating Machinery
Abstract: The valuable resources are rotating technology. In industrial applications, several machines are essential to the effective operation of any system. This article describes the engineering process for developing designs for analyzing variation and the optimization of condition monitoring by the impacts of vibration parameters using Taguchi processes to improve the quality of manufactured items. Crucial spinning equipment is included in the experiment to maximize the vibration frequency reactivity. Using Minitab …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 1, 2025 · pp. 27–41 Read article
-
Hybrid ABS & CF-ABS FDM Printing Tensile Components: A Comprehensive Review and a Novel Taguchi–FEA Based Methodology Framework for Mechanical Optimization
Abstract: Abstract An experimental–numerical strategy and a critical literature survey were addressed to tackle the tensile response of hybrid Acrylonitrile Butadiene Styrene (ABS) and Carbon Fiber–reinforced ABS (CF-ABS) parts manufactured by Fused Deposition Modeling (FDM). The study employed a systematic literature synthesis to identify material challenges, reinforcement compromises and important process parameters that impact anisotropy as well as interlayer bonding. Dual-material tensile samples based on an Automatic Material System (AMS) printer …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 1–27 Read article
-
Hybrid ABS & CF-ABS FDM Printing Tensile Components: A Comprehensive Review and a Novel Taguchi–FEA Based Methodology Framework for Mechanical Optimization
Abstract: Abstract An experimental–numerical strategy and a critical literature survey were addressed to tackle the tensile response of hybrid Acrylonitrile Butadiene Styrene (ABS) and Carbon Fiber–reinforced ABS (CF-ABS) parts manufactured by Fused Deposition Modeling (FDM). The study employed a systematic literature synthesis to identify material challenges, reinforcement compromises and important process parameters that impact anisotropy as well as interlayer bonding. Dual-material tensile samples based on an Automatic Material System (AMS) printer …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 1–5 Read article
-
Optimization of Wear Parameters for Medical ImplantApplications
Abstract: The purpose of the present research is to check the capability of SS 304 for the application of medicalimplants and describe the influence of sandblasting process, applied load, frequency, and slidingdistance on the coefficient of friction of SS 304. In this research, attempts have been made to study thewear behavior of SS 304 under various conditions. In the tribology lab, a wear test was carried out inaccordance with the scheme …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Taguchis Parameter Design Approach to normal cement concrete mixture proportioning
Abstract: This paper presents the results of the optimization of normal cement concrete mixture using Taguchi approach. The Taguchi experiments were designed using an L9 orthogonal array with three factors and three levels each. The water-cement ratio (W/C), total aggregate-cement ratio (TA/C) and total aggregate-water ratio (TA/W) were treated as the control factors. The effects of the water-cement ratio, total aggregate-cement ratio and total aggregate-water ratio on the compressive strength were …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 23–29 Read article
-
Experimental Optimization of Process Parameters for Tape Wound Composite Cylindrical Shells by using Taguchi Method
Abstract: The purpose of this paper is to design and construct laminated composite cylindrical shells. Tape wound layup method is implemented for the preparation of composite laminated shells by E-glass fiber mat and Epoxy resin as adhesive. The shells were made by considering two parameters p1-diameter of mandrel and parameter p2- stacking sequence. As per the L9 orthogonal array the required diameter and stacking sequence was arranged. The composite shells were …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 18–26 Read article
-
Review of Optimization Process Parameters in Welding system
Abstract: This study was based on design of experiment (DOE) using Taguchi method with four welding parameters namely welding current, welding speed, root gap and electrode angle considered for experimentation. An orthogonal array of L9 experimental design was adopted and ultimate tensile strength was investigated for each experimental run. The tensile test was carried out on extracted welded and unwelded specimens using universal testing machine (UTM). Microstructures of the welded specimens …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 1, 2016 · pp. 48–54 Read article
-
Parametric Appraisal for Compression Behaviour of Machine Made Carpet: Exploration of Taguchi Optimisation Techniques
Abstract: Carpets and rugs are mainly classified into two types as hand-made carpets and machine-made carpets, in present; various machine carpets are available produced with needling and bonding techniques. In this study, an attempt has been made to identify the significant factor affecting the compression behavior of machine made carpets manufactured by M-Tuft hi-tech machine with exploration of Taguchi robust design philosophy for quality and productivity characteristics optimization. Lower the better …
Published in International Journal of Manufacturing and Materials Processing · Vol. 3, Issue 2, 2017 · pp. 16–22 Read article
-
Investigation of Optimal Process Parameters of Extrusion Blow Molding Process Using Grey Taguchi Analysis
Abstract: Optimization of machining processes is essential for achieving higher productivity and high-quality products in order to remain competitive. The objective of this study is to optimize the process parameter of extrusion blow molding process for making a plastic container of high density polyethylene (HDPE) grade B52A003 produced by the extrusion blow molding process at CIPET Gwalior. Quality of plastic container of HDPE B52A003 material depends on various parameters. In this …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 1, 2018 · pp. 1–11 Read article
-
Optimization of Machining Parameters for Nylon 6 Composite in CNC Lathe Using PCA-Based TOPSIS
Abstract: This work investigates the parametric optimization of CNC turning operation for Nylon 6 with principal component analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS) based on Taguchi approach. Taguchi’s L16 orthogonal array takes 16 experimental runs to execute the design matrix of turning parameters through PCA coupled with TOPSIS, utilizing relevant experimental data as obtained through experimentation. Turning speed (TS), feed rate (FD) and depth …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 1, 2018 · pp. 36–47 Read article
-
Experimental Investigation of MRR and Surface Finish Using Abrasive Jet Machining of Aluminum Alloy 7475
Abstract: In this thesis, different experiments are performed on aluminum alloy 7475 by varying various parameters such as pressure, sand feed, transverse speed and standoff distance, i.e. nozzle-to-work-piece distance to determine material removal rates and surface finish. Optimization is done using L9 orthogonal array by Taguchi technique to determine better parameters to obtain maximum removal rates and minimum surface roughness. The parameters considered are transverse speed 50, 100, 150 mm/min; standoff …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 1, 2018 · pp. 20–31 Read article
-
Experimental Investigation of Process Parameters on Machining Force, MRR and Power in Turning of AISI 316 Steel
Abstract: A machining process involves many process parameters which directly or indirectly influence the surface quality of the product. A precise knowledge of these optimum parameters facilitate reduce the machining costs and improve product quality. Current investigation aims to investigate the effect of process parameters; cutting speed, feed and depth of cut in turning of SS-316 which is widely used in automobile industries, each varying in three levels. The response characteristics …
Published in International Journal of Computer Aided Manufacturing · Vol. 5, Issue 1, 2019 · pp. 18–25 Read article
-
Microwave Frequency Optimization Techniques for High-Speed Wireless Communication
Abstract: The rapid growth of mobile devices, cloud computing, Internet of Things (IoT), smart applications, and high-definition multimedia services has significantly increased the demand for high-speed wireless communication systems. Microwave communication technologies play a vital role in modern wireless networks because they provide large bandwidth, high data transmission rates, low latency, and efficient spectrum utilization. Microwave and millimeter- wave frequencies are widely used in satellite communication, radar systems, wireless broadband, and …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 12, Issue 1, 2026 · pp. 14–21 Read article
-
Intelligent Beamforming and Channel Estimation for Massive MIMO Systems
Abstract: Massive multiple-input multiple-output (MIMO) uses large antenna arrays to improve spectral efficiency, spatial multiplexing, and link reliability. Its practical performance depends on sufficiently accurate channel state information (CSI), yet pilot overhead, pilot contamination, channel variation, and the cost of searching large beam codebooks make CSI acquisition and beam selection challenging. This paper develops a simulation-oriented intelligent framework that combines sparse angular-domain channel estimation with adaptive beam selection. A narrowband channel …
Published in International Journal of Broadband Cellular Communication Read article