Search
36 articles for “Ni Alloy”
-
Tailoring Electrolytic Deposition of Zn-Ni Alloys for Superior Corrosion Resistance in Harsh Environments
Abstract: Since Zn–Ni alloy coatings are more resistant to corrosion than pure zinc coatings, they are being researched extensively. In this study, Zn–Ni alloy coatings electrolytically deposited from an acidic sulfate bath are investigated. The study looks into how the microstructure, phase composition, and corrosion resistance of the coatings are affected by deposition factors like pH, current density, and electrolyte composition. X-ray diffraction (XRD), potentiodynamic polarization, and scanning electron microscopy (SEM) …
Published in International Journal of Chemical Engineering and Processing · Vol. 11, Issue 1, 2025 Read article
-
Magneto-electrodeposition of Sn–Ni alloy Coating for Better Corrosion Protection
Abstract: The present paper reports the development of excellent corrosion resistant Sn–Ni alloy coatings from a new pyrophosphate bath by magneto-electrodeposition (MED) approach. First part reports optimization of conditions for deposition of Sn–Ni coatings on mild steel by conventional electrodeposition (ED) method and their characterization. The second part demonstrates how the corrosion resistance of Sn–Ni alloy coatings can be improved drastically by MED method, using same bath. Significant decrease of corrosion …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 1, 2016 · pp. 29–42 Read article
-
Production of Compositionally Modulated Nanolayer Zn–Ni Alloy Coatings and Their Corrosion Behaviours
Abstract: Compositionally modulated nanolayer alloy (CNA) coatings of Zn–Ni having alternatively the same compositions have been developed galvanostatically on mild steel from single bath technique (SBT) using square current pulses. Sulphanilic acid and citric acid (CA) were used as additives. Modulation in the composition of alloys were introduced by passing a different switched cathode current densities (SCCD’S) using sophisticated power sources. Variety of CNA coatings was developed under different conditions of …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 1, 2017 · pp. 1–8 Read article
-
Electrolytic Deposition of Zn–Ni Alloy from Acidic Sulphate Bath and Their Characterization
Abstract: A bath containing ZnSO4.7H2O, NiSO4.7H2O, thiamine hydrochloride (THC) and citric acid (CA) has been proposed. Bright Zn–Ni alloy coatings were developed galvanostatically onto mild steel (MS) and their corrosion resistance and other physical properties were studied. THC was found to improve the brightness and homogeneity of the deposit. The dependency of bath composition, current density (c.d.), pH and temperature, agitation on wt.% Ni were tested. Deposition was carried out under …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 19–32 Read article
-
Induced codeposition of Ni-W alloy coatings using glycerol as additive and their characterization
Abstract: As a promising coating material to replace hard chromium coating, the development of nickel–tungsten (Ni-W) alloy coatings of good corrosion protection is of great interest in surface coating technology. Further, the effect of plating variables, including additive on the composition of alloys of induced co-deposition is more vagarious than in other types of alloy deposition. In this regard, an alkaline citrate bath has been formulated for electrodeposition of Ni-W alloy …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 1–9 Read article
-
A Study on the Effect of Current Density on Electrocatalytic Behavior of Ni–Co Alloy
Abstract: Active, stable and more efficient electrocatalysts are the requirements for water splitting applications. In this direction, the present paper presents the experimental results on electrolytic development of Ni–Co alloy coatings, and their application as electrode material for hydrogen evolution reactions (HER) and oxygen evolution reactions (OER). The Ni–Co alloy coatings were electrodeposited on copper substrate from a sulfate bath, using the glycerol as additive. The deposited coatings were then tested …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 1, 2017 · pp. 9–23 Read article
-
Effect of TiO2 on HER Activity of Electrodeposited Zn–Ni Coatings
Abstract: This paper demonstrates the improved electrocatalytic behavior of Zn–Ni alloy coatings for alkaline hydrogen evolution reaction (HER), due to addition of TiO2 nanoparticles into the bath. Zn–Ni alloy coatings have been electrodeposited galvanostatically on copper, with wide compositional range (2.31–7.91 wt. % of Zn) at different current densities (c.d.) between 2.0 and 5.0 A dm-2. The electrocatalytic behaviors of all coatings have been studied for alkaline HER in 1.0 M …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 1, 2017 Read article
-
Review on Recent Trends in Laser Assisted Machining of Hard to Cut Materials
Abstract: Laser-assisted machining (LAM), an alternative method of fabricating hard-to-machine materials, like ceramics, composites, Titanium alloy, Nickel based alloy are being developed and widely utilized in aerospace, automotive, medical and nuclear industries due to their special properties. These materials posing many challenges when machined with the help of Conventional methods of machining. Conventional methods of machining these materials are found to be uneconomical. Among the various external energy assisted machining methods, …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 2, 2021 · pp. 49–57 Read article
-
Eco-Friendly Corrosion Inhibition of Aluminum Alloys with Acacia nilotica in Acidic Media
Abstract: Gravimetric analysis was used to examine the corrosion inhibitory effects of Acacia nilotica extract in 0.5 N H2SO4 on aluminum alloy at different concentrations and at 303 K. At a corrosion inhibitor concentration 0.45% at 303 K, the inhibition efficiency is found to be remarkably high (52.25%). Results show that the extract's capacity to inhibit was caused by its adsorption onto the metal surface via the Langmuir adsorption process. For …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 31–37 Read article
-
Assessment on the Effecs of Sodium Salts of Tungstate and Nitrite as Green Inhibitor for the Corrosion of Cr–5Ni–53W Alloy in 0.5 M NaCl Solution
Abstract: Corrosion inhibition effect of sodium salts of tungstate and nitrite on the sputter-deposited ternary Cr–5Ni–53W alloy was investigated in 0.5 M NaCl solution open to air at 25±1 °C using corrosion test, inhibition mechanism and corrosion potential measurement. The use of sodium salts of both the tungstate and nitrite enhanced the corrosion resistance properties of the ternary alloy in 0.5 M NaCl solution, mostly due to tungstate and nitrite ions …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 25–36 Read article
-
Effects of Tungstate and Nitrite Ions as Corrosion Inhibitor for Cr-10Zr-10W Alloy in 0.5 M NaCl Solution
Abstract: The effect of different concentrations of tungstate and nitrite ions as corrosion inhibitors on the corrosion behavior of the sputter-deposited ternary Cr–10Zr–10W alloy was studied in 0.5 M NaCl solution open to air at 25±1°C using corrosion tests and corrosion potential measurement. The use of both the tungstate and nitrite ions enhanced the corrosion resistance properties of the alloy in 0.5 M NaCl solution. It is found that the tungstate …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 11–19 Read article
-
Sliding wear behavior of plasma sprayed NiCrAlY-WC based composite coatings on AA5083 alloy
Abstract: WC based coatings was deposited by thermal spray process have been extensively used in industrial application to counter abrasive type of wear. In this study, for the first time NiCrAlY-WC based composite coatings were deposited on AA5083 substrate by plasma sprayed coating technique. The composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness. Sliding wear behavior of coated and uncoated samples was carried out on …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 21–26 Read article
-
A Review on Resistance Spot Welding of Dissimilar Metal
Abstract: An extensive analysis of resistance spot welding in dissimilar metals is presented in this review paper. Resistance spot welding (RSW) is a joining technique that is frequently used in various sectors and most importantly in automotive sectors because of its effectiveness and efficiency in creating strong welded joints. This paper provides basic understanding of the various aspects of work done on dissimilar metals. It also gives an understanding of the …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 12–24 Read article
-
Enhancing Machining Sustainability: ComparativeAnalysis of Dry, Minimum Quantity Lubrication, andCryogenic Cooling Methods
Abstract: AbstractSustainable machining is crucial for minimizing the environmental, economic, and social challengesassociated with modern manufacturing. This study reviews environmentally sustainable machiningapproaches including dry machining, Minimum Quantity Lubrication (MQL), and cryogenic cooling,and evaluates their effects on machining performance and sustainability. Key performance indicators,such as surface integrity, tool wear, energy efficiency and cutting forces, are analyzed across variousmaterials. The findings demonstrate that dry machining eliminates liquid waste but is often limited bytool …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 1, 2025 · pp. 1–7 Read article
-
CORROSION RESISTANCE OF BINARY AND TERNARY ALLOY COATINGS FROM ACID SULPHATE BATH
Abstract: Electroplating of three binary (Zn-Ni, Zn-Co and Zn-Fe) and two ternary (Zn-Ni-Co and Zn-Co-Fe) alloy coatings were developed onto mild steel substrate using 2-((4-chlorophenyl) amino)-1-(6-methyl-1H-pyrazolo [3, 4 - b] quinolin-1-yl) ethanone (CME) as an additive. Hull cell technique was used to optimize the bath constituents and operating conditions. Corrosion rate of binary and ternary alloy coatings were determined using potentiodynamic polarization method. Corrosion rate of ternary Zn-Ni-Co alloy coating was …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 2, 2020 · pp. 12–16 Read article
-
Data Assortment for Materials and Alloys – A Graph Theoretic Approach
Abstract: Progression of data assortment is stepped in survey of different organizations and living spaces sometimes installed with modern industries. Any suitable industry identification and preparation of questionnaire is based upon the set of problem and solution methodology. The data obtained from any organization is highly scattered in nature which makes it difficult to analyze. In the present work a methodology is developed which will be helpful to decision maker in …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 2, 2018 · pp. 12–14 Read article
-
Friction Stir Processing & Aging on Fatigue Properties of Different Alloy: A Review
Abstract: The FSP process is a thermo mechanical processing techniques which is carried out by means of pin tool that will heat and mechanically deformed the material. FSP has been developed to produce UFG by applying compressive load with a suitable Tool. To enhance the mechanical properties like strength, fatigue, hardness as well as other properties like optical, electrical, magnetic the microstructure is that decides them. We refine grains by large …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Implications of ceramic – metal matrix compose
Abstract: AbstractThis article summarizes some formatives over WC-metal matrix composite surfacing on hard as well soft alloys. Composite surface has coated by laser, plasma and electroplating. WC-Ni composite has prepared by plasma transferred arc welding on steel surface. Thickness achieved from several mm on small parts to thin deposits on large surfaces. Cu-substrate accorded WC-Ni laser cladded deposition. Laser deposition of WC-Ni-NiCr on stainless has increased wear and erosion under flowing …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 31–37 Read article
-
Service temperature attenuated materials
Abstract: Service temperatures in engineering materials have been one of important factors. It alone has not been only controlling variable for creep properties. Useful services from useful materials therefore have been more important within temperature ranges stipulated for certain services. Temperature ranges of interest to materials engineer have been ranged from cryogenic regions (- 200oC) to temperature of a tungsten-filament lamp (2000oC). This article has been description of materials from room …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 37–45 Read article
-
Recent Advances in the Development and Performance Optimization of Advanced Metallic Alloys
Abstract: The continuous demand for high-performance materials in aerospace, automotive, energy, and biomedical industries has accelerated research and development in advanced metallic alloys. Metallurgy and alloy design play a crucial role in achieving superior mechanical, thermal, and chemical properties while maintaining cost efficiency and sustainability. This study presents a comprehensive overview of recent advances in metallic alloy development, focusing on novel alloying strategies, microstructural control, and performance optimization techniques. Emphasis is …
Published in International Journal of Metallurgy and Alloys · Vol. 12, Issue 1, 2026 · pp. 1–6 Read article