Search
72 articles for “Membrane”
-
Comprehensive Review of Membrane Fouling Control Mechanisms
Abstract: One of the biggest problems with membrane-based separation procedures is membrane fouling. As particles, organic matter, microbes, and other materials build up on the membrane’s surface or inside its pores, the effectiveness of membranes – such as those used in reverse osmosis, ultrafiltration, and microfiltration – declines over time. The effectiveness and longevity of the membrane are eventually lowered because of this fouling, which causes a drop in flux and …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 2, 2025 · pp. 1–9 Read article
-
Analysis of Optimal Clearance Volume Between Two Concentric Cylinders in a Couette Flow Membrane Module Using a Computational Fluid Dynamics Approach
Abstract: Membrane-based separation has become an integral part of the separation industry due to its diverse applications across various fields. However, this progress is often hindered by two major challenges: fouling and concentration polarization. Many membrane modules have made significant efforts to overcome these obstacles, yet a satisfactory solution to mitigate these issues and facilitate membrane-based processes in the separation industries is still needed. These issues are successfully handled using Dynamic …
Published in International Journal of Environmental Chemistry · Vol. 11, Issue 1, 2025 · pp. 135–143 Read article
-
Investigation on Synthesis and Evaluation of Nanopore NaA Zeolite Membranes
Abstract: Effects of synthesis parameters on the membrane structure and performance have been investigated for nanopore NaA zeolite membranes grown onto seeded mullite supports. Molar composition of the starting gel of nano NaA membranes was: SiO2/Al2O3=0.8–3.2, Na2O/Al2O3=1.6–4.6, and H2O/Al2O3=50–200. Also, effects of crystallization time and temperature on the membrane performance were studied. X-ray diffraction (XRD) patterns of the membranes exhibited peaks corresponding to the support and the zeolite. The crystal species …
Published in International Journal of Analytical and Applied Chemistry · Vol. 3, Issue 2, 2017 · pp. 9–22 Read article
-
Membrane Distillation: An Emerging Technology
Abstract: Membrane distillation is a process that utilizes both temperature and pressure difference which results in the 100% theoretical separation of non-volatiles though the distillation is the very old form of purifying water this is the modified form of distillation that uses the membrane for better separation and it is also a highly effective one which can replace the conventional methods if it is exploited properly. This article aimed to develop …
Published in International Journal of Chemical Separation Technology · Vol. 7, Issue 2, 2021 · pp. 23–33 Read article
-
Low temperature plasma treatment of polymeric membranes: a comparative review
Abstract: This paper presents a comparative study of plasma surface modification of various polymeric membranes. Low temperature plasma treatment using pulsed direct current discharge of different gases was employed to enhance hydrophilicity of membranes. Radio frequency discharge of various gases was used to improve surface properties of different polymeric membranes. The enhancement of hydrophilicity of the plasma modified membrane surface was evaluated by measuring the contact angle. The membranes were characterized …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 1–19 Read article
-
Preparation and Evaluation of Nano pore Faujasite Membranes
Abstract: Nano pore Faujasite zeolite membranes were synthesized by in-situ hydrothermal method on porous ceramic tubes. Hydrothermal crystallization was carried out under an autogenously pressure and at a static condition of 100 oC. Molar composition of the starting gel of Faujasite zeolite membranes were NaX: SiO2/Al2O3=10-27, Na2O/Al2O3=4-9, H2O/Al2O3=250; NaY: SiO2/Al2O3=2.5-4, Na2O/SiO2=1.08-2, H2O/Na2O=30-200. X-ray diffraction (XRD) patterns of the membranes exhibited peaks corresponding to the support and the zeolite. The crystal species …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 2, 2017 · pp. 15–24 Read article
-
Hydrodynamic Study Through Computational FluidDynamics of Radial Flow Membrane Module
Abstract: Historically Crossflow Membrane modules came first in the membrane-based separation (MBS)process. Its high shear generation overcomes two non-idealities concentration polarization andsubsequent fouling. Primarily, high shear generation and large surface area create a positive domainfor large applications. Thereafter, feed flow rate-dependent shear generation creates a hindrance.This obstruction is overcome with Dynamic Shear Enhanced Membrane Filtration Pilot (DSEMFPs).Low surface area is a vital drawback of DSEMFPs. This radial flow membrane module with …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 8–15 Read article
-
A Review on Water Treatment by Nanotechnology Based Membrane Materials
Abstract: Nanotechnology offers novel nanomaterials having a good potential for the surface, ground and wastewater treatment contaminants using different technologies. Performance of membrane technology is based upon the type and size of material, and novel nano-structured materials range from 4 nm to 100 nm. Among the numerous 3D nanoparticles having high potential applications, nanostructured coated ceramic membranes, nanocomposite, TFC, carbon nano tubes (CNT), zeolite, silicate and mixed matrix membranes are considered …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 5, Issue 1, 2019 · pp. 43–54 Read article
-
Reactive Separation for Biodiesel Purification Using Hybrid Membrane Systems
Abstract: Biodiesel produced through transesterification typically contains several impurities, including residual glycerol, unreacted methanol, soaps, water and homogeneous catalysts, all of which reduce fuel quality and hinder compliance with EN 14214 and ASTM D6751 standards. Conventional purification techniques such as water washing, centrifugation and vacuum distillation are energy-intensive, generate large volumes of wastewater and often fail to efficiently remove polar contaminants. To overcome these limitations, this study examines a reactive separation …
Published in International Journal of Chemical Separation Technology · Vol. 11, Issue 2, 2025 · pp. 17–30 Read article
-
Effect of Some Physical Properties on the Swelling Behaviour of Biomass Membranes
Abstract: The membranes of Detarium microcarpum seeds (DMS) and Alfzelia africana seeds (AAS) were developed. The water uptake capacities for DMS and AAS were found to be 500% and 390% respectively. The percentage of water uptake by Detarium microcarpum membrane and Alfzelia africana membrane, both increased with increased in the concentration of DMS and AAS as well as pH. The effect of contact time on water uptake showed that the water …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 2, 2016 · pp. 8–15 Read article
-
Novel Ionic Liquids Supported Membranes: A Review
Abstract: In this work, a supported ionic liquid membrane (SILM) can be prepared by impregnating different types of polymers with suitable novel phosphonium-based ionic liquids (ILs). ILs have reached an enormous interest as CO2 solvents and other engineering applications due to their unique properties such as negligible vapour pressure and selectivity, making them very attractive in order to obtain stable supported liquid membranes. This work can appraise the preparation and use …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 2, 2016 · pp. 15–23 Read article
-
SEPARATION OF CO2/CH4 USING POLYMERIC MEMBRANES - REVIEW
Abstract: Separation of CO /CH mixture is widely done efficient separation of mixture into desired components unit processes and unit operation had 2 4 been developed with passage of time. Sometimes using conventional technologies. CO2 when carried along with CH4 can cause additional cost of pumping. Most commonly used technique like cryogenic separation, adsorption and absorption are used for decades for separation of CO2 form CH4.Membrane has been developing technology for …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 1, 2019 · pp. 13–29 Read article
-
Performance Evaluation of 45kW Low Temperature Proton Exchange Membrane Fuel Cell System Using Simulation Techniques
Abstract: AbstractThe Low-Temperature Proton Exchange Membrane Fuel Cell (LT-PEMFC) has gained prominence as a promising solution for clean and efficient energy generation, particularly in the automotive industry, where stringent emission norms and sustainability goals are driving innovation. LT-PEMFC systems offer several inherent advantages, including high energy conversion efficiency, low operational temperature, rapid start-up capability, and compatibility with hydrogen as a renewable fuel source. These characteristics make them attractive for commercial vehicle …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 2, 2025 · pp. 25–39 Read article
-
Effect of polymer architecture on the gas separation performance of PIM-1 membranes
Abstract: Molecular simulations are used to demonstrate the effects of chain architectureson the gas separation performance of PIM-1 membranes. Four different architectures(linear, H-shape, star, and dendritic) were considered to investigate the transport propertiesof four industrially relevant gases (CO2, CH4, O2, and N2). The results obtainedfor the linear PIM-1 agree well with the available experimental data. The simulationsindicate that it is indeed possible to tune the free volume morphology of PIM-1 membranesby …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 2, 2020 · pp. 35–56 Read article
-
Hydraulic Flushing Flux Enhancement Techniques in Membrane Separation Processes: A mini Review
Abstract: Looking into current scenario of the wastewater generated from the allied industries which leads researcher and industry persons to reclaim the water to certain extent. Conventional methods removes the pollutants and toxics to maximum level but quality of water is the must requirement for the industries to work efficiently. Membrane separation processes play vital role in rectifying the conventional method by replacing them to some extent or by hybrid mixture. …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 1–3 Read article
-
Review On Bipolar Plate Geometric Design and Materials for Proton Exchange Membrane Fuel Cell Applications
Abstract: Abstract Bipolar plates (BPs) are vital components in proton exchange membrane fuel cells (PEMFCs), performing multiple essential functions that directly influence system efficiency, durability, and overall operational performance. They ensure uniform distribution of reactant gases across the active area, provide electrical conductivity between adjacent cells, assist in effective thermal management by dissipating heat generated during electrochemical reactions, and maintain proper sealing to prevent leakage of gases and coolant. Among these …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 2, 2025 · pp. 40–56 Read article
-
One-Step Fabrication of Superomniphobic Pvdf-HFPSiO2Membrane for Long-Term CO2 Absorption inMembrane Gas Absorption System
Abstract: Membrane pore wetting is one of the major challenges for membrane gas absorption, especially when low surface tension liquid absorbents such as amine absorbents are utilized. To minimize diffusion resistance across the membrane, maintaining a non-wetted operating mode in membrane gas absorption is crucial. In this study, a superomniphobic polyvinylidene fluoride-cohexafluoropropylene membrane was fabricated by adding silica nanoparticles (SiO2) in an ethanol coagulation bath through non-solvent-induced phase separation. The surface …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 2, 2024 · pp. 35–44 Read article
-
A Review on Nano Filtration System
Abstract: In the later half of the 1980s, nanofiltration (NF) became a significant development in the purification of water. When NF was first introduced, it was marketed as a less energy-intensive substitute for traditional techniques like reverse osmosis (RO). However, as its special qualities and uses became clear, NF was acknowledged as a separate technology in 1988. Comprehending the differences between ultrafiltration (UF), RO, and NF is essential to appreciating its …
Published in International Journal of Environmental Chemistry · Vol. 10, Issue 2, 2024 · pp. 1–4 Read article
-
Performance Characterization of Couette FlowMembrane Module Through Computational FluidDynamics
Abstract: Membrane-based separation has been in rigorous applications in health services since the last fewdecennia. Dynamic Shear Enhanced Membrane Filtration Pilots (DSEMFPs) is a promising membranemodule. The first reported DSEMFPs was a Couette flow type module in 1985. It was used for collectingplasma from donors. This module consists of two concentric cylinders. The outer one is fixed while theinner one is rotating, having a membrane on the outer surface of it. …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 1, 2024 · pp. 1–5 Read article
-
Nanocapsules Applied in Pharmaceutical Delivery Systems
Abstract: Nanocapsules, which are minute vesicles composed of a parent material shielded by a polymer casing to encase the drug in the nucleus while regulating the drug’s dispensation and targeting capacity, represent a ground-breaking advancement in the realm of pharmaceuticals. The purpose behind the creation of nanocapsules is to enhance their efficiency and functionality by leveraging various methodologies like polymerization, solvent diffusion, dialysis, and supercritical fluid technology. These nanocapsules introduce a …
Published in International journal of Nanobiotechnology · Vol. 10, Issue 2, 2024 · pp. 1–10 Read article