Search
21 articles for “Lithium-ion battery”
-
Thermal Management Of Cylindrical Lithium-Ion Battery Using A Wavy Tube
Abstract: To maintain a proper temperature range and eliminate local temperature disparities, thermal management is required for lithium-ion batteries in electric vehicles. A wavy tube is presented for a liquid cooling cylindrical lithium-ion battery module in this research. On the suggested battery module, three-dimensional transient simulations were run, and numerical improvements were made by changing the wavy contact angle of the wavy tube. The heat dissipation efficiency and temperature field homogeneity …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 2, 2023 · pp. 10–22 Read article
-
Use of Atomic Force Microscopy on Lithium-Ion Batteries
Abstract: Improvement of cutting edge Lithium Ion Batteries (LIBs) shows a quickly developing field of science and innovation. In any case, numerous crucial issues stayed uncertain because of absence of comprehension of surface/interface understanding of LIB on nanometer scale. Here, we survey late uses of nuclear power microscopy to study three key parts of lithium particle batteries specifically strong electrolyte interface, particle transportation and dendrite development. In situ AFM is a …
Published in International Journal of Applied Nanotechnology · Vol. 2, Issue 1, 2016 · pp. 21–23 Read article
-
Advanced Battery Management System Techniques in Electric Vehicle: A Review
Abstract: Since they are efficient and emit no emissions when in use, electric vehicles are a key component of sustainable transportation in the modern world. The battery’s performance has a big impact on the electric vehicle’s driving range. The selection of the battery, its technology, and its effective use are crucial for it. As far as battery technology is concerned, lithium-ion batteries are the preferred option for power storage systems due …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 10, Issue 2, 2024 · pp. 6–15 Read article
-
Optimization Techniques for Battery Health Monitoring and Management
Abstract: The "IoT-Based Battery Management System" project represents an innovative solution to address the growing demand for efficient and intelligent battery monitoring and management across various applications. In order to achieve maximum efficiency from a multi-cell Li-ion battery, every cell inside the battery must be "matched." Most battery safety and qualification standards demand that a battery be built entirely of compatible cells. Still, not much work is done to ensure that …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 10, Issue 1, 2024 Read article
-
Enhancing Electric Vehicle Range and Efficiency with Hybrid Auxiliary Energy Storage Systems: A Comprehensive Investigation
Abstract: Battery packs are the most significant and basic component of the electric vehicle system, and it therefore matters to analyse their operational metrics. Numerous Batteries that are used as energy storage devices for transporting needed energy have many upsides, such as minimal or no combustion, light weight, and more convenient charging and discharging cycles. However, when overcharged, these batteries experience many not beneficial temperature effects, as well as mechanical distortion …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 9, Issue 1, 2023 · pp. 50–62 Read article
-
Porous Carbon Materials for Electrochemical Energy Storage
Abstract: The climate change and energy demand promote the rapid development of electrochemical energy-storage devices. Due to an excellent chemical stability, high electronic conductivity and large specific surface area, porous carbon materials have always been considering as a promising candidate for electrochemical energy storage. This focus review summaries recent advances in the synthesis of various porous carbon materials electrochemical energy storage devices like lithium-ion batteries, supercapacitors, lithium-ion hybrid capacitors have been …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 13–16 Read article
-
Advancement of Nanotechnology in Batteries
Abstract: As energy source used by most devices such as smart phones, cameras or computers are Lithium batteries, they are becoming the indistinguishable feature of everyday modern civilization. The higher power efficiency was most appealing attribute when opposed to certain redox power devices. It gives rise for significant concern well into the production of hybrid lithium ion batteries for electric automobiles. At higher density lithium constitutes its ideal anode element in …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 18–24 Read article
-
Life Booster of Batteries: The Solid State Batteries
Abstract: Solid state batteries are much safer than the existing lithium-ion batteries due to solid electrolyte, light weight, reliable, recyclable and safe. Because of the highly reactive organic solvent which has a high risk of boiling, freezing or burning in existing batteries,, will be replace by solid state batteries which has very long life validity in very near future. The sulphide solid electrolyte which has very high ionic conductivity can substantially …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 1, Issue 2, 2015 · pp. 12–16 Read article
-
Second-Life Battery Applications and Recycling Technologies of EV in India: A Comprehensive Review
Abstract: Abstract The rapid uptake of electric vehicles (EVs) worldwide is creating a new challenge of end-of-life (EoL) lithium-ion batteries (LIBs). As EV penetration accelerates under national initiatives such as the National Electric Mobility Mission Plan and Faster Adoption and Manufacturing of Electric Vehicles (FAME), the country faces an emerging challenge of managing end-of-life batteries. This paper examines technical pathways for second-life reuse of EV batteries (e.g. stationary energy storage, grid …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 1, 2026 · pp. 15–24 Read article
-
APPLICATIONS OF NANO TECHNOLOGY IN ENERGY SECTOR
Abstract: Energy is necessary for all human activity. It is the need of the hour .Now more effective methods are used for energy production such as Nano based technology. In the present era the energy consumption is more than energy production from the different sources. The use of nanotechnology is better to get higher efficiency. It is Eco-energy so there are minimum chances of environmental destruction. The property of material is …
Published in International Journal of Energetic Materials · Vol. 4, Issue 1, 2018 · pp. 6–16 Read article
-
Recent Trends and Challenges of Lithium Sulphur Batteries
Abstract: Lithium-ion (Li-ion) batteries that are currently available in market have certain limitations due to their low energy density and do not meet the growing demands of the energy storage market. Thus, the building next-generation rechargeable Li and Li-ion batteries with the higher energy densities, better safety characteristic, lower cost and longer cycle life is vibrant to overcome the challenges of fast depleting conventional energy resources. To achieve smaller and lighter …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 1–6 Read article
-
Nanotechnology in E-Vehicle Batteries
Abstract: Vehicle electrification had also risen to prominence as a cornerstone of an automobile industry during the past two decades. A recent study appearing in the journal iScience provides indepth assessments and quantitative assessments from both traditional EV battery packs and the current generation of lithium-ion batteries. At the moment, electric vehicle batteries use lithiumIon(LI) technology. Existing examples almost always make use of LI batteries. Nanotechnology has the potential to help …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 2, 2022 · pp. 22–27 Read article
-
Design of Battery Pack for Mahindra e2O: A Electric Vehicle (EV)
Abstract: In an effort to disprove the myth that hybrid motors are unaffordable, businesses are focusing on building cheap electric automobiles. Due to continuous transmission of mechanical vibration, exposure to high impact forces and also thermal runaway current Lithium-ion battery packs are prone to failure. To provide greater degree of protection against all of these great mechanical design and battery packaging can be done. Design elements like thermal barrier, selecting a …
Published in International Journal of Electrical Power System and Technology · Vol. 8, Issue 1, 2022 · pp. 50–56 Read article
-
Smart Battery Management System with Real-Time Estimation of SOC and SOH
Abstract: To make batteries in electric vehicles and energy storage systems last longer, work better, and be safer, they need a Smart Battery Management System (BMS). The main goal of this project is to find out the battery's State of Charge (SOC) and State of Health (SOH) right away. SOC reflects the remaining usable capacity of the battery, while SOH indicates the overall condition and degree of aging of the battery. …
Published in International Journal of Analog Integrated Circuits · Vol. 12, Issue 1, 2026 · pp. 1–7 Read article
-
Facile Synthesis and Electrochemical Exploration ofHexagonal Copper Sulfide (CuS) Nanocrystals for Energy Applications
Abstract: Copper sulfide (CuS) is a promising material for a variety of applications, including solar cells, lithium-ion batteries, sensors, and catalysts. In this current study, a facile technique for the synthesis of CuS nanocrystallites at modrate temperature 160°) without the use of any template or additives was reported. The reaction was carried out in a pressure reactor for 24 hours. he crystalline nature of the synthesized CuS nanocrystallites was confirmed using …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
Facile Synthesis and Electrochemical Exploration ofHexagonal Copper Sulfide (CuS) Nanocrystals for EnergyApplications
Abstract: Copper sulfide (CuS) is a promising material for a variety of applications, including solar cells, lithium-ion batteries, sensors, and catalysts. In this current study, a facile technique for the synthesis of CuS nanocrystallites at modrate temperature 160°) without the use of any template or additives was reported. The reaction was carried out in a pressure reactor for 24 hours. he crystalline nature of the synthesized CuS nanocrystallites was confirmed using …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
Performance Evaluation of EV Charging Station with Bidirectional Power Flow for Grid Support Applications
Abstract: The swift increase in the number of electric vehicles (EVs) brings considerable prospects and difficulties for contemporary power distribution networks. This paper presents the performance evaluation of a 20 kW bidirectional EV charging station designed to facilitate both Grid-to-Vehicle (G2V) and Vehicle-to-Grid (V2G) power flow for enhanced smart grid support applications. The proposed topology integrates an AC/DC bidirectional converter interfaced to the 415 V, 50 Hz three-phase utility grid through …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 12, Issue 1, 2026 · pp. 21–28 Read article
-
Enhancing Battery Management Systems: Innovations in State-of-Charge Estimation
Abstract: A Battery Management System (BMS) is crucial for managing the electronics of rechargeable batteries, ensuring their safe and efficient operation. This is particularly important for lithium-ion (Li-ion) batteries, which are preferred in electric vehicles and energy storage systems due to their high energy density, low self-discharge rates, long cycle life, and broad operating temperature ranges. The primary functions of a BMS include monitoring the state of charge (SOC), managing battery …
Published in International Journal of Energetic Materials · Vol. 9, Issue 2, 2023 · pp. 5–11 Read article
-
Bidirectional DC–DC Converter Design and Control for EV Charging Stations with Grid Support Capability
Abstract: The rapid proliferation of electric vehicles (EVs) has intensified the demand for advanced charging infrastructure capable of delivering reliable, efficient, and grid-aware power management. Conventional unidirectional chargers are inadequate for modern smart-grid applications, as they preclude the utilization of stored battery energy for grid support functions. This paper presents the design, mathematical modeling, and simulation-based validation of a non-isolated bidirectional DC–DC buck–boost converter rated at 20 kW for EV charging …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 12, Issue 1, 2026 Read article
-
Electrodes at commercial forefronts
Abstract: Electrodes at commercial forefronts describe self sustenance approaches in place of traditional cent percent dependence on fissile fuels. Application of solid oxide fuel cells in developed multi-electrode systems have employed in cases of power shortages at nano-material designs. Nano-materials have large surface area but introduced problems such as poor electrode packing densities, high electrolyte reactivity, and expensive synthesis procedures. Thermal stress assisted electrolytic decomposition has motivated use of high temperature …
Published in International Journal of Analytical and Applied Chemistry · Vol. 5, Issue 1, 2019 · pp. 15–28 Read article