Search
883 articles for “Generation”
-
Conversion of Heat Absorbed (Waste Heat) in a Building for Electricity Generation Using a Thermoelectric Generator
Abstract: This study investigates the feasibility of thermoelectric generators (TEGs) for recovering waste heat from building systems and converting it into electrical energy through the Seebeck effect. A journal-scale simulation framework integrating ANSYS thermal modeling with MATLAB/Simulink electrical analysis was developed to evaluate TEG deployment on building envelope surfaces at the Federal Polytechnic Nyak Shendam, Nigeria. Results demonstrate a proportional increase in electrical output with rising temperature gradients, confirming predictable thermoelectric …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 12, Issue 1, 2026 · pp. 8–16 Read article
-
Excitation System, Proportional and Integral Controls of a Synchronous Generator for Reducing Adverse Impacts to Power System from Voltage Fluctuations
Abstract: The project analyzes the voltage fluctuations caused by any disturbance in a power system and minimizes the oscillations by controlling the excitement field using a feedback control loop. Adequate numbers of journal papers and literature materials were researched and reviewed to understand the principles of generator excitation and investigate various control systems which can be worked upon to keep the voltage output stabilized. It is known that Automatic Voltage Regulator …
Published in International Journal of Electrical Power System and Technology · Vol. 11, Issue 1, 2025 Read article
-
Designing of Permanent Magnet Synchronous Generator for Wind Turbine
Abstract: Our energy crisis in a faster manner, renewable energy resources plays a major role to meet the power demand. Alternative method for energy crisis is renewable energy which is becoming more popular and is currently a hot topic in research and development. Wind energy which is clean source of energy with no cost, and more efficiency has been chosen more preferably than other renewable resources. Wind turbine is a device …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 1, 2018 · pp. 1–8 Read article
-
Permanent and Electro-Magnetic Generator
Abstract: We know the process of power generation through windmill, thermal power plant in these power generation systems coal and water are the main power generation sources in our country and are non-renewable. In order to save resources which are available in nature solar and wind power generation systems were invented. In the same way, there is a great need to invent new methods to develop the power. So, here we …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 1, 2018 · pp. 10–12 Read article
-
Electrical Power Generation from Foot Step using 555 Timer IC
Abstract: Electricity has now become a basic requirement for all humans. Electricity is used in almost every situation. Without electricity, we would perish. Electricity is employed in everyday life, industries, and transportation, among other things. So, by merely walking on the footstep, we are creating electrical power using renewable energy. Because non-renewable energy is scarce, renewable energy is in high demand these days. This paper discusses the process of generating mechanical …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 7, Issue 2, 2021 · pp. 20–26 Read article
-
Hybrid Evolutionary Algorithm for Automated Test Case Generation in Large-Scale Software Systems
Abstract: Automated test case generation is a crucial activity for ensuring the reliability, robustness, and quality of large-scale software systems. Conventional test generation techniques often face significant challenges in handling scalability, achieving high code coverage, and adapting to complex and heterogeneous software architectures. Evolutionary algorithms have emerged as effective solutions, capable of exploring large search spaces and generating test suites with improved coverage and fault detection capabilities. However, individual evolutionary strategies, …
Published in International Journal of Software Computing and Testing · Vol. 12, Issue 1, 2026 · pp. 15–21 Read article
-
AI-Assisted Code Generation: Integrating Natural Language Models with Compiler Frameworks for Enhanced Software Development
Abstract: The rapid evolution of Artificial Intelligence (AI) has profoundly transformed contemporary software engineering practices, particularly through the emergence of AI-assisted code generation driven by large-scale natural language models (NLMs). These models, trained on extensive repositories of source code and technical documentation, enable developers to generate, modify, refactor, and optimize source code directly from natural language instructions, thereby significantly reducing manual coding effort and accelerating overall software development cycles. By allowing …
Published in International Journal of Software Computing and Testing · Vol. 12, Issue 1, 2026 · pp. 1–7 Read article
-
SYNTHETIC MEDICAL DATA GENERATIONUSING GAN MODEL
Abstract: The healthcare industry has witnessed growing interest in synthetic data generation, driven by increasing demands for large and diverse datasets. Real medical data is often inaccessible due to stringent privacy laws, data scarcity, and ethical considerations. Sophisticated models, such as Generative Adversarial Networks (GANs), have emerged as powerful tools to generate synthetic data that closely resembles real-world data. This approach is particularly effective for addressing the challenges of researching rare …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 11, Issue 2, 2025 Read article
-
Multi-Objective Optimization of Distributed Generator in the Transmission System
Abstract: This paper proposes a multi-objective optimization method to determine the optimal size allocation of four different types of distributed generators, that is, TYPE-1, TYPE-2, TYPE-3, and TYPE-4 in transmission networks. In one such optimization strategy, distributed generators are injected after the Newton–Raphson method, a popular power flow analysis tool, has been applied first. A power system’s steady-state operating conditions, including voltage magnitudes, phase angles, line flows, and power losses, can …
Published in International Journal of Electrical Power System and Technology · Vol. 10, Issue 2, 2024 · pp. 9–18 Read article
-
Multi-Objective Optimization of Distributed Generator in the Transmission System
Abstract: This paper proposes a multi-objective optimization method to determine the optimal size allocation of four different types of distributed generators, that is, TYPE-1, TYPE-2, TYPE-3, and TYPE-4 in transmission networks. In one such optimization strategy, distributed generators are injected after the Newton–Raphson method, a popular power flow analysis tool, has been applied first. A power system’s steady-state operating conditions, including voltage magnitudes, phase angles, line flows, and power losses, can …
Published in International Journal of Electrical Power System and Technology · Vol. 10, Issue 2, 2024 · pp. 9–18 Read article
-
Novel Integrated, Distributed Generation Approach with Renewable Energy Interface with HVDC, A Key Solution To The Future Challenges
Abstract: The recent development in the integrated energy generation as well the distributed generation with the offshore wind farms provides good solution and an experienced significant growth to meet the load demand in recent years. Technical knowledge allow the design of wind farms at higher distances, making the high voltage dc (HVDC) transmission a real alternative to current high voltage ac (HVAC) transmission. When the network is decoupled from the wind …
Published in International Journal of Electrical Power System and Technology · Vol. 1, Issue 2, 2015 · pp. 17–23 Read article
-
A Comparative Study of Solar, Wind, and Biomass Energy for Decentralized Power Generation
Abstract: The need for clean, renewable energy sources is growing as decentralized power generation gains popularity due to its ability to provide reliable power to remote areas and reduce transmission losses. This paper compares three popular renewable energy sources—solar, wind, and biomass—evaluating their feasibility, efficiency, costs, environmental impact, and sustainability in the context of decentralized power generation. Findings indicate that while each energy source has distinct advantages and challenges, a hybrid …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 11, Issue 2, 2025 Read article
-
Propeller Shaft Energy Recovery: A Pathway to Sustainable Power Generation
Abstract: A vehicle, such as a large truck, can produce electricity for powering a hybrid engine or recharging batteries by using an electricity-generating driveshaft. The driveshaft that generates electricity is composed of coils of copper wire that wrap around the magnetised driveshaft, which acts as the rotor of a generator for electricity. The magnetised driveshaft rotates as the hybrid car moves, producing an electrical field that copper wire coils catch and …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 1, 2023 · pp. 31–35 Read article
-
Heat Generated Simulation with Bacteria and Fungi inCrude Oil Remediation in an Aerated Lagoon
Abstract: Studies on the heat generated by bacteria and fungi in an aerated lagoon were monitored by theapplication of MATLAB computed software simulation. Mathematical models were developed in termsof substrate utilization by microbes and correlated with the Monod’s equation model which revealedthe trend of heat generated at different operating temperature of 15°C, 30°C, 45°C, 60°C, 75°C, 90°C,105°C and 120°C. The heat generated varies with increase in the microbial concentration as favoredby …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 12, Issue 1, 2026 · pp. 27–45 Read article
-
Comparison of Payback Period and Return on Investments for Industrial Scale Solar Photovoltaic Power Generation Plant Considering Net Metering and Gross Metering
Abstract: Photovoltaic power generation plants have become highly popular in recent years, especially in the last decades with the various financial benefits and government incentives provided to domestic, commercial, agricultural, and industrial applications. Net metering and gross metering are the two methods normally employed by distribution companies to register the energy generated by photovoltaic power plant installers. This paper explores both the ideas of metering, for an industrial scale 100-kW rooftop …
Published in International Journal of Electrical Power System and Technology · Vol. 11, Issue 1, 2025 Read article
-
Wind Energy Conversion System: Theoretical Study and Concept
Abstract: For the past ten years, the manufacture of wind power has been the primary focus of power creation. A vast amount of research has been done on renewable energy, with a special emphasis on wind power extraction. When non-renewable fossil fuel supply is declining, wind power offers an environmentally conscious means of generating electricity and assists in meeting the country's requirement for energy. This chapter presents a brief review of …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 1, 2024 · pp. 31–39 Read article
-
Generative Design and Simulation for Castor Wheel Assembly
Abstract: A castor wheel CAD model can be used to optimise the wheel's design for avariety of elements, including load capacity, durability, and use. Given theemployment of evolutionary algorithms and search strategies in thiscomputational process, generative design, also known as evolutionary design,is not a new idea. It can be characterised as a prototype design system thatcreates fresh conceptual designs from scratch using a genetic algorithm. In thismethod, a prototype system generates …
Published in International Journal of Mechanics and Design · Vol. 8, Issue 2, 2022 · pp. 15–24 Read article
-
Evolution of Mobile Wireless Generations and the Architectural Foundations of AI-Integrated 6G Networks
Abstract: Wireless communication has moved through five complete technology generations in roughly four decades, and each transition has reshaped how societies exchange information, run businesses, and design cities. This paper is the first instalment of a two-part review and concentrates on the historical arc of that journey, tracing the defining traits, benefits, and shortcomings of 1G through 5G before turning to the architectural groundwork on which sixth-generation (6G) networks are being …
Published in International Journal of Digital Communication and Analog Signals · Vol. 12, Issue 2, 2026 Read article
-
Low-Cost FDM-Printed Microfluidic Droplet Generators with Vertical Flow-Focusing Channels
Abstract: *Author for CorrespondenceL. K. NarangammanaE-mail: [email protected] Low-cost fabrication methods are now essential for expanding access to microfluidic technologies in biological and laboratory applications. In this work, we present a fused deposition modeling (FDM) based approach for the rapid fabrication of monolithic microfluidic droplet generators incorporating several T-junction and specific flow-focusing geometries, including a novel vertical channel configuration. All devices were fabricated without post-processing or bonding, demonstrating a simple and cost-effective …
Published in International Journal of Chemical Separation Technology · Vol. 12, Issue 1, 2026 · pp. 30–46 Read article
-
Automated Image Captioning Using Xception–CNN and LSTM for Descriptive Sentence Generation
Abstract: Generating descriptive texts for images is a complex and challenging task that requires advanced deep learning techniques. This paper presents a descriptive sentence generator for images using a combination of convolutional neural networks and recurrent neural networks. The proposed model utilizes a pretrained convolutional neural network, Xception, to extract image features, which are then processed by a long short-term memory network to generate meaningful textual descriptions. The model is trained …
Published in International Journal of Image Processing and Pattern Recognition · Vol. 11, Issue 2, 2025 · pp. 20–28 Read article