Search
20 articles for “Fracture”
-
Tibia/Shin Bone Fracture: Its Surgical Management
Abstract: Tibia is also called shin bone. A fracture occurs when there is a disruption in the continuity of a bone. A crack or break in the tibial bone, also called a tibial fracture, is one of the most painful and disrupted conditions of the lower limb. This type of fracture is caused by accidents, falls, collisions, twisting, sports, etc. Pain, bleeding, tissue injury, tingling, and other symptoms are common in …
Published in International Journal of Medical Surgical Nursing · Vol. 7, Issue 1, 2024 · pp. 53–56 Read article
-
Effect of Nano-Fillers on the Mechanical and Fracture Behavior of Polymer Composite Matrices: A Review
Abstract: The modification of polymer composite matrices through the incorporation of nano-scale fillers has become a prominent and highly effective strategy for enhancing mechanical performance, stiffness, and fracture resistance. Unlike conventional micro-scale reinforcements, nano-fillers possess exceptionally high surface area–to–volume ratios and unique physicochemical characteristics that significantly influence interfacial phenomena within the polymer matrix. Materials, such as carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), nano-silica, and layered silicate nanoclays, introduce advanced toughening mechanisms …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 31–36 Read article
-
Analytical Study of Ceramic Compositions: Lamination and Fracture Toughness
Abstract: This study investigates the characteristics and fabrication techniques of laminated ceramic composites, focusing on various glass-ceramic systems, including alumina, BaTiO3/Al2O3, and LiO2‐ZrO2‐SiO2‐Al2O3 (LZSA). The inherent brittleness of ceramics, attributed to surface flaws and their limited toughness, necessitates the development of layered structures to enhance mechanical reliability. Layered ceramics demonstrate improved fracture toughness, crucial for applications in aerospace, biomedicine, and military armor. Techniques such as tape casting, electrophoretic deposition, and advanced …
Published in International Journal of Analytical and Applied Chemistry · Vol. 10, Issue 2, 2024 · pp. 38–44 Read article
-
Nonlinear Finite Element Approaches for Structural Failure Prediction: A Comparative Assessment with Case Studies
Abstract: Abstract Nonlinear finite element methods (NLFEM) have become indispensable for predicting structural failure in complex engineering systems, particularly where linear models fail to capture critical behaviors, such as large deformations, crack propagation, and post-buckling responses. This study investigates and compares several state-of-the-art NLFEM techniques – namely cohesive zone modeling (CZM), extended finite element method (XFEM), and phase-field fracture modelling – in the context of structural failure prediction. Three representative case …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 11, Issue 1, 2025 · pp. 1–5 Read article
-
An Analysis of the Mechanical Properties of Polyethylene Composites Reinforced with Short Vetiver Fibers
Abstract: Synthetic fibers (such as carbon, glass, ceramic fibers, etc.) are a cause of environmental concern, so natural fibers (such as vetiver, calotropis gigantea, flax, hemp, jute, etc.) are extensively used. In this study, the compression molding process was used to improve low-density polyethylene (LDPE) matrix composites reinforced with vetiver fiber (VF). Experiments were conducted by varying VF length, VF content, and fiber treatment time. The composites' static mechanical characteristics, including …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 · pp. 1–13 Read article
-
Advanced Magnesium-Based Metallic GlassComposites for Biomedical Implant Applications: AMachine-Learning-Informed Approach
Abstract: Magnesium-based bulk metallic glasses (Mg-BMGs) combine strength, low density, and tunable degradability. Their amorphous matrix has a small plastic process zone. This zone is only about 4 μm wide. A small process zone keeps most glasses brittle. Adding a second phase is the best fix. This chapter extends Mg-BMGs to true composites. We call these Mg-based bulk metallic glass composites, or Mg- BMGCs. The chapter covers matrix engineering and interfacial …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 48–65 Read article
-
Interfacial Engineering and Performance Optimization of Jute-Fiber-Reinforced Epoxy Laminates
Abstract: The increasing environmental concerns associated with synthetic fiber reinforced polymer composites have driven substantial research interest toward naturally derived, biodegradable fiber alternatives. This study presents a comprehensive mechanical and thermal characterization of jute fiber reinforced epoxy composites fabricated via hand lay-up followed by compression molding. Jute fibers were subjected to alkali treatment using 5 wt% sodium hydroxide (NaOH) solution for 4 hours at ambient temperature to enhance fiber–matrix interfacial bonding …
Published in International Journal of Polymer Science and Engineering · Vol. 12, Issue 1, 2026 · pp. 52–64 Read article
-
Enhancing the strength and flexibility of crowns and bridges: advances in materials, design, and nanotechnology.
Abstract: The continuous advancement in restorative dentistry has led to the integration of nanotechnology in the fabrication of crowns and bridges, significantly enhancing their mechanical and functional performance. Nano-enhanced materials, including nanoparticle-reinforced resin matrices, nanostructured ceramics, and nano-modified adhesive systems, demonstrate superior properties compared to conventional materials. These improvements are largely attributed to the uniform dispersion of nanoparticles, which enhances filler–matrix bonding, increases surface interaction, and reduces microstructural defects, resulting in …
Published in International journal of Nanobiotechnology · Vol. 12, Issue 1, 2026 · pp. 34–42 Read article
-
Characterization of AL-2014 TIG Welded Joints
Abstract: Abstract – This experimental study presents a comprehensive investigation into the tensile strength of TIG-welded butt joints made from Al-2014 alloy, a material that find applications in aerospace and structural engineering due to its excellent machinability and high strength to weight ratio. Welding Al-2014 alloy is challenging because it is more prone to hot cracking, oxide layer formation and thermal distortion. Therefore, it is very important to optimize welding parameters …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 1, 2026 · pp. 25–31 Read article
-
Design, development and Testing of 2-Phase Separator
Abstract: AB S T R A C T As the pressure vessel operates under high internal pressure, the choice of material and accuracy in design play a vital role in ensuring its safety and reliability. Proper design is essential because any failure in a pressure vessel can lead to serious hazards, financial losses, and operational shutdowns. In compliance with the ASME Code (Section VIII, Division 1) and the process data sheet, …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 1–6 Read article
-
Self-healing Polymer Nanocomposites study using filler effect
Abstract: Polymers, while versatile, often lack the desired mechanical strength, thermal stability, or barrierproperties for high-performance applications. This limitation is elegantly addressed bycreating polymer nanocomposites. These materials are formed by incorporating small amounts(typically 1-5 wt%) of nanoscale fillers (e.g., carbon nanotubes, graphene, silica, clay, metaloxide nanoparticles) into a polymer matrix. The magic of nanocomposites lies in the incrediblyhigh surface area-to-volume ratio of the nanoparticles and their unique interactions with thepolymer chains. …
Published in International Journal of Polymer Science and Engineering Read article
-
Joule Effect Revolutionizing Self-Healing Polymer Nanocomposites
Abstract: Imagine a world where the materials around us, from the wings of an airplane to thecasing of your smartphone, could repair themselves after damage. No more discarding crackeddevices, no more costly structural repairs, just a material that intelligently mends its ownwounds. This vision, once confined to science fiction, is rapidly becoming a reality, thanks togroundbreaking advancements in the self-healing polymer nanocomposite materials. And at theheart of one of the most …
Published in International Journal of Polymer Science and Engineering Read article
-
Self-healing Polymer Nanocomposites study using filler effect
Abstract: Polymers, while versatile, often lack the desired mechanical strength, thermal stability, or barrier properties for high-performance applications. This limitation is elegantly addressed by creating polymer nanocomposites. These materials are formed by incorporating small amounts (typically 1-5 wt%) of nanoscale fillers (e.g., carbon nanotubes, graphene, silica, clay, metal oxide nanoparticles) into a polymer matrix. The magic of nanocomposites lies in the incredibly high surface area-to-volume ratio of the nanoparticles and their …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 11, Issue 2, 2025 Read article
-
Joule Effect Revolutionizing Self-Healing Polymer Nanocomposites
Abstract: Abstract: Imagine a world where the materials around us, from the wings of an airplane to thecasing of your smartphone, could repair themselves after damage. No more discarding crackeddevices, no more costly structural repairs, just a material that intelligently mends its ownwounds. This vision, once confined to science fiction, is rapidly becoming a reality, thanks togroundbreaking advancements in the self-healing polymer nanocomposite materials. And at theheart of one of the …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 2, 2025 Read article
-
Bone Mass Density and Osteomyelitis in Elderly-An Overview
Abstract: Bone mass density (BMD) plays a critical role in skeletal health, particularly in the elderly, where age-related bone loss increases susceptibility to infections such as osteomyelitis. Osteomyelitis, a severe bone infection often caused by Staphylococcus aureus, is more prevalent in older adults due to factors such as osteoporosis, impaired immune function, diabetes, and peripheral vascular disease. Reduced BMD weakens bone integrity, making it more vulnerable to fractures and microbial invasion, …
Published in International Journal of Geriatric Nursing · Vol. 8, Issue 1, 2025 Read article
-
Shoulder Dystocia: A Comprehensive Overview of Causes, Management, and Outcomes
Abstract: Shoulder dystocia is a serious and potentially life-threatening complication that can occur during childbirth, characterized by the baby's shoulder becoming stuck in the mother's pelvic area after the head has been delivered. This obstructed delivery can lead to severe difficulties in the birth process, requiring immediate and skilled intervention to prevent harm to both the mother and baby. Shoulder dystocia occurs when one or both of the baby's shoulders are …
Published in International Journal of Obstetrics, Perinatal and Neonatal Nursing · Vol. 11, Issue 1, 2025 · pp. 35–40 Read article
-
Design and Analysis of MacPherson Suspension System and Enhanced Suspension Systems
Abstract: Customers look for safety and comfort, thus they are crucial to the success of car marketing. The McPherson suspension system, one of the most popular shock absorbers, has a history of excellent performance. Its unexpected demise and sudden fracturing, however, made it clear that the system needs thoughtful adjustments. The most important components of the shock absorber system that require improvement are the strut mount and spring. Because of the …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 2, 2024 · pp. 13–26 Read article
-
Physico-Mechanical and Degradation Properties on Agro-Waste Based Polymer Composites Reinforced with Banana Bunch Fiber
Abstract: The usage of banana bunch fibers in polymer composite parts for the automotive, aerospace, and construction industries is growing. As people grow more aware of the danger of synthetic fibers, banana bunch fibers are being used in an increasing variety of sectors. It is important to recognize that humans depend on the Earth for survival, not the other way around. This understanding drives scientists and policymakers to seek alternatives to …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 2, 2024 · pp. 33–43 Read article
-
The Potential of Bacterial Nanoparticles in Vermicast: Facilitating Microplastic Biodegradation for Environmental Remediation
Abstract: Globally, the plastic pollution has become a major issue that poses a major threat to the soil ecosystem. Plastic degradation is a quite challenging process as plastic persists in the environment for longer durations causing harm to surrounding flora and fauna. Polyethylene is most abundantly found as a contaminant in the environment. It may enter the food chain causing harm to health. The dynamics of microplastic pollution in soils, as …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 10, Issue 1, 2024 Read article
-
Highway Condition Assessment System
Abstract: Roadside path holes convey a significant hazard to both pedestrians and drivers of motor vehicles. Road detection of damage is the responsibility of government agencies, which are made up of engineers and laborers. It is not practical to evaluate every section of the road efficiently by hand as it takes a long time and a large number of workers. The detection can be automated as a solution to this problem. …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 10, Issue 1, 2024 · pp. 21–30 Read article