Search
23 articles for “Fiber Reinforced Concrete”
-
Structural Behavior of Fiber Reinforced Concrete
Abstract: It’s a structural behavior research was done on normal concrete because it possesses low tensilestrength shows cracking. The addition of fiber can enhance the compressive and tensile properties ofconcrete. An experimental study was conducted to evaluate the compressive and tensile strength offiber-reinforced concrete, confirming the improvements in these mechanical properties. The variousaspects covered are compression test, split tensile strength, Effects of fibers on concrete. The study isdone on the comparison …
Published in International Journal of Concrete Technology · Vol. 10, Issue 1, 2024 · pp. 18–24 Read article
-
INVESTIGATION OF STEEL FIBER REINFORCED CONCRETE CORBELS BY EXPERIMENTAL AND ANALYTICAL METHOD
Abstract: In the present paper, an experimental results and predicted values by truss analogy method, ACI Building Code (ACI 381-83) provisions for corbels, and method given by Fattuhi is investigated. The concrete used in the corbels is of M-60 grade. Test were carried out on 27 samples of size 150 x 150 x 200- mm were shear span was varied from 175 to 200 as shown in table (5) and concrete …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 23–29 Read article
-
Performance of Temperature on Compressive and Shear Strength of High Strength Fiber Reinforced Concrete
Abstract: ABSTRACT This paper presents the results of the experimental investigation of various strengths at elevated temperature of high strength fiber reinforced concrete (HSFRC). Variables considered in the research work are various strengths, temperature and fiber volume fractions. Various strengths considered for investigation are compressive strength, shear strength. Concrete mix of M60 grade and crimped steel fibers with aspect ratio 50 are used. The fiber volume fraction is varied from 1 …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 13–23 Read article
-
An Analysis of the Use of Bamboo Fiber in Concrete
Abstract: Abstract-Bamboo fibers exhibit great potential when it comes to concrete strength and help in minimizing the unavoidable brittle failure. However, there is a need for reconceptualization which combines all other relevant important information and makes it easy for the reader to decide whether or not them uses of bamboo fibers are appropriate. Thus, this review is conducted on bamboo fiber-reinforced concrete to create an overview of historical and more recent …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 10, Issue 2, 2024 Read article
-
Modulus of Elasticity of Steel Fiber Reinforced Concrete with Metakaolin
Abstract: In this paper the attempt has been made to study the results of an experimental investigation using steel fiber (SF) and metakaolin (MK) on the properties of structural concrete. Crimped steel fibers of aspect ratio 85 and MK were used in this investigation. The effects of these fiber and MK on workability, density, and on various strengths of M60 grade concrete are studied. Fiber content varies from 2.5% to 10% …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 50–59 Read article
-
Scrap Steel Fiber Reinforce Concrete
Abstract: The research mentioned on this paper turned into finished to look at the feasibility of the usage of metal scrap received from lathe system in fiber bolstered concrete via way of means of checking the compressive strength, and flexural strength of M20 concrete and consequently optimizing the fiber proportions. In this look at, a contrast has been made among undeniable cement concrete and metal scrap fiber bolstered concrete (SSFRC). The …
Published in International Journal of Concrete Technology · Vol. 7, Issue 2, 2021 · pp. 30–38 Read article
-
Effect of Elevated Temperature on Compressive Strength and Flexural Strength of Fiber Reinforced Concrete
Abstract: Now a day concrete is being used extensively in the construction that might be subjected to elevated temperatures. The behavior of concrete structures at elevated temperatures is significant importance in predicting the safety of structures in response to certain accidents or particular service conditions. This paper deals with the mechanical properties of concrete with steel fibers subjected to temperatures up to 500°C. The specimens were kept in oven for 1 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 19–32 Read article
-
A Review of Bamboo Fiber’s Use in Concrete
Abstract: AbstractLocal sustainable materials must be found and used in the building and provision of homes due to therising demand for natural resources in emerging nations. Natural building materials that are regardedas sustainable are “green”, thousands of tons of bamboo are traded annually, and this creates a lot ofwaste. Bamboo was utilized in the building’s construction as well as in structural elements like roofing,columns, and supports. The main component utilized in …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 2, 2024 · pp. 33–36 Read article
-
A Study on Mechanical Properties and Fracture Behavior of Chopped Fiber Reinforced Self-Compacting Concrete
Abstract: The development of self-compacting concrete (SCC) is innovatory landmark in the history of construction industry resulting in predominant usage of SCC worldwide nowadays. It has many advantages over normal concrete in terms of enhancement in productivity, reduction in labor and overall cost, excellent finished product with excellent mechanical response and durability. Further, incorporation of fibers enhances its properties specially related to post crack behavior of SCC. Hence, the aim of …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 90–122 Read article
-
Mechanical Response of Cementitious Composites Containing Alkali-Resistant Glass Fiber Reinforcement
Abstract: ABSTRACT Concrete is one of the most widely utilized construction materials because of its excellent compressive strength and long-term durability. Despite these advantages, it exhibits poor tensile strength and is prone to cracking, which can reduce its overall structural performance. To address these shortcomings, the inclusion of fibers in concrete has gained significant attention as an effective reinforcement technique. In this study, the effect of Alkali-Resistant (AR) glass fibers on …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 36–44 Read article
-
Enhancing Compressive Strength of Geopolymer Concrete with Micro and Macro Steel Fibers: A Study on Fiber-Reinforced Geopolymers
Abstract: AbstractThis research investigates the impact of micro and macro steel fibers on the compressive strength ofgeopolymer concrete (GPC). The study utilizes locally sourced materials, including river sand,granite aggregates, fly ash, and ground granulated blast furnace slag (GGBS) in a 50:50 ratio asalumino-silicate materials. Sodium hydroxide (NaOH) and sodium silicate (Na₂SiO₃) were employedas activators, with the addition of a superplasticizer (Conplast SP430) to enhance workability. FourGPC mixes were analyzed: GPC without …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 10, Issue 2, 2024 · pp. 15–20 Read article
-
Analyzing the Effect of Rice Husk Ash & Quartz Powder on Mechanical Properties of Polypropylene Fiber Based Concrete Using Regression Analysis
Abstract: Several works were identified with sustainable development have uplifted the improvement of composite binders incorporating Portland cement, industrial, agricultural by- products and partial substitutions to aggregates. One of the most adverse effects of using cement is the emission of CO2 into atmosphere during production and it can be reduced with the effective use of cementitious materials. Several efforts were attempted to make use of supplementary cementitious materials to enhance the …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 51–57 Read article
-
Influence of Jute Fibers on Tensile Strength and Flexural Strength of Concrete Composites
Abstract: Abstract: Concrete is a very versatile construction material, and its demand is growing day by day to meet ongoing construction work. At the same time aggressive impact of concrete materials on environment is also increasing. Concrete is recognised as foundation of our progress allowing us to build the infrastructure of modern life but raising issues like global warming in present day civilisation. This modern growth comes at the cost of …
Published in International Journal of Concrete Technology · Vol. 12, Issue 1, 2026 · pp. 25–30 Read article
-
Innovations and Sustainability in Structural Engineering:Advanced Materials, Seismic Retrofitting, andComputational Analysis
Abstract: Abstract This paper explores the latest advancements in structural engineering, emphasizing sustainable practices, the development of advanced materials, and innovative computational techniques for structural analysis. Structural engineering, a fundamental discipline within civil engineering, is experiencing significant growth due to increasing environmental challenges, stricter building codes, and the need for more resilient infrastructure. To meet modern demands, advanced materials like high-performance concrete, fiber-reinforced polymers (FRPs), and shape memory alloys (SMAs) have …
Published in International Journal of Structural Engineering and Analysis · Vol. 10, Issue 2, 2024 Read article
-
Potential of Natural Fibres for Strengthening Existing Structures – A Review
Abstract: To rehabilitate the deficiencies in the existing structures, synthetic/artificial fiber reinforced polymer composites have been considered as an effective external strengthening material for construction industries since a long period, due to their outstanding performances like high strength-to-weight ratio, lightness, and resistance to corrosion. But few of their drawbacks in terms of high cost, environmental issues etc., they have been triggered the introduction and development of natural fibers. Natural fibres are …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 2, 2018 · pp. 38–46 Read article
-
Experimental Investigation on Shear & Flexural Behaviour of GFRP-Reinforced Concrete Beam
Abstract: Reinforced concrete (RC) beams are among the most commonly used structural elements in civil engineeringstructures. However, the long-term durability of conventional steel reinforcement is often affected bycorrosion when exposed to aggressive environmental conditions, which can significantly reduce the servicelife and structural performance of concrete members. In recent years, Glass Fiber Reinforced Polymer(GFRP) bars have emerged as a promising alternative reinforcement material due to their high tensilestrength, light weight, and excellent …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 Read article
-
Experimental Investigation on Shear & Flexural Behavior of GFRP-Reinforced Concrete Beam
Abstract: Reinforced concrete (RC) beams are among the most commonly used structural elements in civil engineering structures. However, the long-term durability of conventional steel reinforcement is often affected by corrosion when exposed to aggressive environmental conditions, which can significantly reduce the service life and structural performance of concrete members. In recent years, Glass Fiber Reinforced Polymer (GFRP) bars have emerged as a promising alternative reinforcement material due to their high tensile …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 Read article
-
A Comparative Evaluation of Geopolymer, Conventional and GFRP Retrofitting Techniques in Augmenting Seismic Robustness of RC Structures
Abstract: Abstract The requirement of retrofitting an old existing structure, rendered structurally unsafe (based on its structural health assessment) is observed to be a major challenge faced by engineers as it necessitates comprehensive and complicated repair procedures. It was further seen that during earthquake, the main reason for failure of any structure was the failure of its beam column joints, thereby making it essential to strengthen them specifically. Until recently, the …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 1, 2025 · pp. 1–13 Read article
-
Study on the Effects of Polypropylene Fiber in Concrete Paver Blocks
Abstract: Road transportation is the lifeline of the nation and its development is a crucial concern. The traditional bituminous pavement needs the continuous maintenance and rehabilitation operations, which ultimately leads to the scope for cement concrete pavements. This paper highlights the effects of polypropylene fibers in concrete paver blocks, which is a recent advancement in the field of reinforced concrete pavement design. Concrete paver blocks prepared for M30 grade and the …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 2, 2017 · pp. 32–38 Read article
-
Improving Prestressed Concrete Box Girders Using Polymer Composites: Experimental Findings and Analysis
Abstract: Prestressed concrete box girder bridges exhibit complex structural behavior due to various loading scenarios. Extensive studies, both experimental and numerical, have helped advance their use in engineering. The spatial stress in prestressed concrete box girder bridges, especially during construction and service phases, has been analyzed using shell cells, which provide more accurate tensile stress data than beam cells. The deck with the numerous hat section was evaluated in the current …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 2, 2024 · pp. 6–11 Read article