Search
29 articles for “CFD analysis”
-
CFD Analysis and Modification of Muffler of 1067 cc4 Cylinder Inline Engine for Better Performance
Abstract: Back pressure is one of the important parameter which determine the performance of the muffler. Pressure drop of the exhaust system includes losses due to piping, silencer, and termination. The most critical mechanical factor regarding backpressure of any commercial modified and available muffler is cross flow perforated tube in which the diameter of the perforated tube hole and porosity of the perforations are most critical. In this paper, the objective …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 3, Issue 1, 2017 · pp. 40–46 Read article
-
CFD Analysis of Earth Heat Exchanger with Air as a Cooling Medium
Abstract: An earth air tube heat exchanger (EATHE) uses the thermal energy of the ground for the air cooling in summer and air heating in winter due to the temperature difference between the air and underground surface. With the help of EATHE we can reduce the energy consumption required for space heating or cooling. However, for determining the surface heat convection, due to lack of available methods it is difficult to …
Published in International Journal of Computer Aided Manufacturing · Vol. 3, Issue 2, 2017 · pp. 21–30 Read article
-
CFD Analysis of Hydrodynamic Journal Bearing
Abstract: Journal bearings have the longest history on scientific study of any class of fluid-film bearings. These journal bearings are widely used in most of the rotating machineries due to its high load-carrying capacity and formation of fluid-film thickness during the operation. This research paper represents performance evaluation of hydrodynamic journal bearing using Computational Fluid Dynamics (CFD) approach. For this study, two different geometrical bearings are considered (circular and non-circular) operating …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 2, 2018 · pp. 23–29 Read article
-
CFD Analysis on Exhaust System of a Car
Abstract: The pollution and global warming is due to air pollution. It is to be noted that air pollution is mainly caused by the toxic gases from the exhaust of the automobiles. Only 30% of the fuel is converted into energy source to run the engine remaining 70% of fuel is of un-burnt hydrocarbon, carbon monoxide and nitrogen oxides. From modified catalytic converter, noise level will decrease. Here, the performance of …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 38–50 Read article
-
CFD Analysis and Prediction of Shockwave/Boundary-Layer Interaction at Hypersonic Flows Using RANS Models
Abstract: Interaction of shockwaves with turbulent boundary layer plays an important role in the design and operability of high-speed aerospace vehicles and air-breathing engines. The adverse pressure gradient of the shock is often strong enough to separate the boundary layer. The objective of the present research paper deals with the analysis of hypersonic viscous flows dominated by strong shockwave/boundary-layer interactions (SWBLI) over wing-flap and wing-fuselage junction configurations. The effects of the …
Published in International Journal of Computer Aided Manufacturing · Vol. 5, Issue 2, 2019 · pp. 33–50 Read article
-
Enhancing the Heat Transfer in the Thermal Chimney by Attaching the Fin under CFD Analysis
Abstract: The primary and secondary heaters in heat exchangers were numerically evaluated at nominal temperatures of 140°C for the primary heaters, 100°C for the secondary heaters, and 20°C for the ambient temperature in order to validate the design idea for enhancing the air temperature. The “convective heat transfer” of air in a thermal chimney built to laboratory size using two different types of electrical heaters and a rectangular cross-section of constant …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 2, 2023 · pp. 9–26 Read article
-
CFD on Parametric Analysis of Compression Ignition Engine by using Star CCM+
Abstract: Stringent emission from the conventional vehicles draws attention of automobile researches to develop engine either high fuel efficiency and low emission of NOx, CO and unburnt hydrocarbons. Hence, there by Homogeneous charge compression ignition came to the effect. Homogeneous charge compression ignition engine is the type of engine the well organised mixture of air and fuel ratio enters into the combustion chamber, and it is compressed up to auto-ignited temperature …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 7, Issue 2, 2021 · pp. 27–66 Read article
-
Diesel Engine Combustion and Emission Characteristics Study, Taking into Account the Potential of Biogas Substitution for the Purpose of Enhancing Environmental Cleanliness and Promoting Health
Abstract: Necessity for alternative fuels arises from the escalating energy requirements and the detrimental effects of fossil fuel emissions on environmental well-being. Alternative fuels have been extensively researched to improve energy efficiency. A study examines how alternative fuel affects compression ignition (CI) engine performance, pollution, and combustion. Biogas is investigated as a diesel engine fuel substitute in this study using computational fluid dynamics (CFD). Upon doing a thorough examination of the …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 9, Issue 1, 2023 · pp. 24–39 Read article
-
Exploring the Flow Physics during Unsteady Shock Interactions Using CFD and Numerical Analysis
Abstract: Numerical reproductions were done to analyze a Shock Interaction component in the twofold wedge design. The first wedge edge is steady in quite a while. Huge contrasts in stream structure were seen between the calculations with different edges on second wedge. The most exceptional violent variances happened toward the edges of the whole area. Symmetric and antisymmetric movements of the detachment district were recognized in the immediate stream utilizing restrictive …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 2, 2019 · pp. 40–55 Read article
-
A PARAMETRIC ANALYSIS OF AMBIENT TEMPERATURE ON FLAT AND CURVED SURFACE OF A PV CELL
Abstract: This work focused on investigating and controlling the effect of ambient temperature on the surface temperature of a PV module. An experimental approach is carried out to provide ventilation on the surface of the PV panel with the help of a blower. With the increase in solar irradiance, the panel temperature also increases so experiment is conducted for different velocities of the air with the help of a blower to …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 1, 2018 · pp. 39–48 Read article
-
Computational Analysis of Shockwave–Boundary Layer Interaction at Hypersonic Speeds
Abstract: Successful plan of present-day supersonic and hypersonic vehicles requires a comprehension of the physical stream field structure of shockwave–boundary-layer interactions (SWBLIs) and productive reproduction techniques for their portrayal. The significant focal point of this paper is two-dimensional (2D) hypersonic SBLI as well as stream portrayal and physical properties around SWBLIs; be that as it may, even in ostensibly 2D/axis-symmetric streams, the mean stream measurements might be 3D.The objective of the …
Published in International Journal of Computer Aided Manufacturing · Vol. 5, Issue 2, 2019 · pp. 1–25 Read article
-
Thermal Dynamics and Kinetic Modelling of Cryogenic Fuels in Aerospace and IndustrialApplications
Abstract: Cryogenic fuels are critical for high-speed aerospace and industrial applications, where efficient handling, storage, and usage are paramount for performance and safety. This study explores the thermal dynamics and kinetic modeling of cryogenic fuels, focusing on liquid handling systems and propellant technologies. Utilizing computational fluid dynamics (CFD) analysis, the research evaluates the behavior of cryogenic liquids within insulated vessels under extreme temperature conditions, identifying key parameters that influence thermal stability …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 10, Issue 2, 2024 Read article
-
The Effect of Air Bubbles Injection into a Shell and Coiled Tube Heat Exchanger: A Review
Abstract: In present study, a shell and coiled tube heat exchanger has been mathematically studied. The helically coiled tube and the effects of on thermal characteristics of heat exchanger will be proposed in this study. CFD analysis on ANSYS software will be performed. Shell tube carrying cold water, helical coil containing hot water and U shaped hollow pipe carries air. Thermal properties and its effect has been considered in the study.
Published in International Journal of Computer Aided Manufacturing · Vol. 3, Issue 2, 2017 · pp. 34–42 Read article
-
Comparative Design and Performance Analysis of Axial Flow Compressor Blades Using Various Materials
Abstract: This study presents a comprehensive design and performance analysis of axial flow compressor blades using various materials to improve efficiency, durability, and performance. Axial flow compressors are critical components in aircraft engines and industrial gas turbines, and the choice of blade material significantly impacts their functionality under extreme operational conditions. The analysis explores several materials, including traditional alloys, advanced composites, and high-temperature resistant metals, evaluating their mechanical properties, thermal stability, …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 2, 2024 · pp. 7–15 Read article
-
Review on Thermoelectrical Generator and Software Analysis of Exhaust System
Abstract: In this century global warming is a very concerning issue. Vehicles are day-by-day increasing on roads, which emits harmful hot gases to environment. Due to exhaust gases and unwanted pollution TEG is a concept to utilize the heat energy of an engine for other works purposes. A major part of energy is being engaged in such issues. Here a study of conservation is being followed. TEG thermo-electric generator is a …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 2, 2020 · pp. 38–45 Read article
-
A REVIEW ON SOFTWARE ANALYSIS OF EARTH HEAT EXCHANGER
Abstract: Renewable energy is the best source of energy. It is abundant in nature, it’s just like a gift of god. Nowadays, heating and cooling is a major issue in environment due to global warming. A major part of energy is being engaged in such issues. So Earth tube heat exchanger is a renewable source of energy for heating and cooling of any building. An Earth Air Tube Heat Exchanger (EATHE) …
Published in International Journal of Computer Aided Manufacturing · Vol. 5, Issue 2, 2019 · pp. 26–32 Read article
-
Analysis and Design of Structural Components in Offshore and Marine Engineering
Abstract: Offshore and marine engineering play a pivotal role in the global energy market, particularly in the oil and gas industry. The structural integrity of components in such challenging environments is critical, as they are exposed to harsh conditions including high winds, waves, and corrosion. This research paper aims to explore the analytical and design principles for structural components used in offshore and marine engineering, emphasizing materials, loading conditions, failure mechanisms, …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 2, 2024 · pp. 1–6 Read article
-
Computational Simulation of Continuous Centrifugal Machine using Computational Fluid Dynamics
Abstract: In this paper, the centrifugal machine which is used in a sugar industry has been analysed. The centrifugal machine is used for the separation of the molasses and the sugar crystals from the massecuite. The objective behind the analysis of the flow in the centrifuge is to achieve the reduction in the separation process time using the Computational Fluid Dynamics and to increase the tonnes/hour output of the sugar. The …
Published in International Journal of Computer Aided Manufacturing · Vol. 5, Issue 1, 2019 · pp. 1–8 Read article
-
Cooling and Heating Effect of Geothermal Energy and Its Thermal Analysis Using Air as a Flow Medium
Abstract: Geothermal energy is one of the renewable sources of energy, which exists free in the environment. The main concept of a geothermal energy is the thermal energy of the ground which is used for cooling and heating. Here, air is used as a flow medium. The flow medium gets cool in the summer and gets heated in the winter due to the temperature difference between the flow medium and underground …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 18–32 Read article
-
Thermal Analysis of Earth Heat Exchanger Using Air as a Medium
Abstract: Thermal energy is the main concept of an earth air tube heat exchanger (EATHE), which uses the thermal energy of the ground for cooling and heating of the fluid medium. Here, air is used as cooling medium. The air cools in summer and gets heated in winter due to the temperature difference between the air and underground surface. However, for the study of the surface heat convection study of model …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 1–17 Read article